alternativeenergy automobiles biodiesel business car cars definition diesel diesels encyclopedia eng. engine engines fuel machinary manufacturing oggbot oggbot-added-by%3Aschmichael oldgcgeeks schmichael truck vegetable-oil

My tags:

From Wikipedia, the free encyclopedia

This article needs additional citations for verification. Please help improve this article by adding reliable references (ideally, using inline citations). Unsourced material may be challenged and removed. (April 2008)

A diesel engine is an internal combustion engine which operates using the diesel cycle (named after Dr. Rudolph Diesel). Diesel engines have the highest thermal efficiency^{[citation needed]} compared to any internal or external combustion engine.

The defining feature of the diesel engine is the use of compression ignition to burn the fuel, which is injected into the combustion chamber during the final stage of compression. This is in contrast to a petrol (gasoline) engine or gas engine, which uses the Otto cycle, in which a fuel/air mixture is ignited by a spark plug.

Diesel engines are manufactured in two stroke and four stroke versions. They were originally used as a more efficient replacement for stationary steam engines. Since the 1910s they have been used in submarines and ships. Use in locomotives, large trucks and electric generating plants followed later. In the 1930s, they slowly began to be used in a few automobiles. Since the 1970s, the use of diesel engines in larger on-road and off-road vehicles in the USA increased. As of 2007^[update], about 50 percent of all new car sales in Europe are diesel.^[1]

Contents 1 History 2 Early history timeline 3 How diesel engines work 3.1 Early fuel injection systems 3.2 Cold weather 3.2.1 Starting 3.2.2 Gelling 3.3 Fuel delivery 3.4 Major advantages 3.5 Mechanical and electronic injection 3.6 Indirect injection 3.7 Direct injection 3.8 Unit direct injection 3.9 Common rail direct injection 4 Types 4.1 Early 4.2 Modern 4.3 Gas generator 5 Advantages and disadvantages versus spark-ignition engines 5.1 Power and fuel economy 5.2 Emissions 5.3 Power and torque 5.4 Noise 5.5 Reliability 5.6 Quality and variety of fuels 6 Fuel and fluid characteristics 7 Safety 7.1 Yachts 7.2 Military vehicle safety 8 Diesel applications 9 Engine speeds 9.1 High-speed engines 9.2 Medium-speed engines 9.3 Low-speed engines 10 Supercharging and turbocharging 11 Other applications 12 Current and future developments 13 Maintenance hazards 14 See also 15 References 16 Patents 17 External links

[edit] History

Rudolf Diesel, of German nationality, was born in 1858 in Paris where his parents were Bavarian immigrants.^[2] He was educated at Munich Polytechnic. After graduation he was employed as a refrigerator engineer but his true love lay in engine design. Diesel designed many heat engines, including a solar-powered air engine. In 1893, he published a paper describing an engine with combustion within a cylinder, the internal combustion engine. In 1894, he filed for a patent for his new invention, dubbed the diesel engine. His engine was the first to prove that fuel could be ignited without a spark. He operated his first successful engine in 1897.

In 1898, Diesel was granted U.S. Patent 608,845 for an "internal combustion engine".

Though best known for his invention of the pressure-ignited heat engine that bears his name, Rudolf Diesel was also a well-respected thermal engineer and a social theorist. Diesel's inventions have three points in common: they relate to heat transference by natural physical processes or laws; they involve markedly creative mechanical design; and they were initially motivated by the inventor's concept of sociological needs. Rudolf Diesel originally conceived the diesel engine to enable independent craftsmen and artisans to compete with industry.^[3]

At Augsburg, on August 10, 1893, Rudolf Diesel's prime model, a single 10-foot (3.0 m) iron cylinder with a flywheel at its base, ran on its own power for the first time. Diesel spent two more years making improvements and in 1896 demonstrated another model with a theoretical efficiency of 75 percent, in contrast to the 10 percent efficiency of the steam engine. By 1898, Diesel had become a millionaire. His engines were used to power pipelines, electric and water plants, automobiles and trucks, and marine craft. They were soon to be used in mines, oil fields, factories, and transoceanic shipping.

[edit] Early history timeline

• 1893 Rudolf Diesel obtains a patent (RP 67207) titled [Theory and Construction of a Rational Heat-engine to Replace the Steam Engine and Combustion Engines Known Today] "Arbeitsverfahren und Ausführungsart für Verbrennungsmaschienen".

• 1897 On August 10 Diesel builds his first working prototype in Augsburg

• 1899 Diesel licenses his engine to builders Krupp and Sulzer, who become famous builders.

• 1902 until 1910 MAN produced 82 copies of the stationary diesel engine .

• 1903 A diesel engine was installed in a river boat.

• 1904 The French build the first diesel submarine, the Z.

• 1905 For diesel engines turbochargers and intercoolers were manufactured by Büchl (CH), as well as a scroll loader from Creux (F) company.

• 1908 Prosper L'Orange develops with Deutz a precisely controlled injection pump with a needle injection nozzle.

• 1909 The prechamber with halfspherical combustion chamber is developed by Prosper L'Orange with Benz.

• 1910 The Norwegian research ship Fram is the first ship of the world with a Diesel drive, afterwards Selandia was the first trading vessel. By 1960 the Diesel drive had displaced steam turbine and coal fired steam engines.

• 1912 The Danish built First diesel ship MS Selandia. The first locomotive with a diesel engine.

• 1913 US Navy submarines use NELSECO units. Rudolf Diesel died mysteriously when he crossed the English Channel on the SS Dresden.

• 1914 German U-Boats are powered by MAN diesels.

• 1919 Prosper L'Orange obtains a patent on a prechamber insert and makes a needle injection nozzle. First diesel engine from Cummins.

• 1921 Prosper L'Orange builts a continuous variable output injection pump.

• 1922 First vehicle with (pre-chamber) diesel engine is theAgricultural tractor type 6 of Mercedes-Benz agricultural tractor OE Benz Sendling.

• 1923 first truck with diesel engine made by MAN, Benz and Daimler was tested.

• 1924 The introduction on the truck market of the diesel engine by commercial truck manufacturers in the IAA. Fairbanks-Morse starts building diesel engines.

• 1927 first truck injection pump and injection nozzles of Bosch. First passenger car prototype of Stoewer.

• 1930s Caterpillar starts building diesels for their tractors.

• 1932 Introduction of strongest Diesel truck of the world by MAN with 160 hp (120 kW).

• 1933 of first passenger cars with diesel engine (Citroën Rosalie), Citroën uses an engine of the English Diesel pioneer sir Harry Ricardo [2]. The car does not go into production due to legal restrictions in the use of Diesel engines.

• 1934 First turbo Diesel engine for railway train by Maybach.

• 1934-35 Junkers Motorenwerke in Germany starts production of the Jumo aviation diesel engine family, the most famous of these being the Jumo 205, of which over 900 examples are produced by the outbreak of World War II.^[4]

• 1936 Mercedes-Benz builds the 260D diesel car. AT&SF inaugurates the diesel train Super Chief. Airship Hindenburg is powered by diesel engines. First serie manufactured passenger cars with diesel engine (Mercedes-Benz 260 D, Hanomag and Saurer). Daimler Benz airship diesel engine 602LOF6 for airship the LZ129 Hindenburg.

• 1937 BMW 114 (aircraft engine)|BMW 114 experimental airplane diesel engine development.

• 1938 First turbo Diesel engine of Saurer.

• 1944 Development of Air cooling for diesel engines by Klöckner Humboldt Deutz AG (KHD) for the production stage and later also for Magirus Deutz.

• 1953 Turbo Diesel truck for Mercedes in small series.

• 1954 Turbo-Diesel truck in mass production of Volvo. First diesel engine with an overhead cam shaft of Daimler Benz.^[5]

• 1968 Peugeot places with 204 the first small cars with forward crosswise mounted Diesel.

• 1973 Load air cooling with the diesel engine of DAF.

• 1976 February Testing of a diesel engine of Volkswagen for the passenger car Volkswagen Golf. The Common Rail injection system was developed by the ETH Zurich from 1976 to 1992.

• 1977 The production of the first passenger car turbo-Diesels (Mercedes 300 SD).

• 1985 ATI Intercooler diesel engine from DAF. First Common Rail system with the IFA truck type W50.

• 1986 Electronic Diesel Control (EDC) of Bosch with the BMW 524tD.

• 1987 Most powerful production truck with a 460 hp (340 kW) MAN diesel engine.

• 1988 First turbochargers with direct injection in the diesel engine from Fiat.

• 1991 European emission standards (redirect Euro 1)euro 1 met with the truck diesel engine of Scania.

• 1993 Pump nozzle injection for the truck diesel engine of Volvo.

• 1994 Unit injector system by Bosch for diesel engines.

• 1999 euro 3 of Scania and first Common Rail truck diesel engine of Renault.

• 2004 In Western Europe, the ratio of passenger cars with diesel engine exceeds 50%.

Selective catalytic reduction (SCR) system in Mercedes, Euro 4 with EGR system and particle filters of MAN. Piezoelectric injector technology by Bosch.

• 2006 First worldwide outstanding success in the Diesel racing car AUDI R10 TDI that wins 12

hours running in Sebring and defeats all other engine concepts. Euro 5 for all Iveco trucks.

• 2008 Subaru presents to first production stages Diesel double-piston engine. Euro 5 with EGR system

strongest series trucks with a 680 hp (510 kW) MAN diesel engine.

• 2009 Volvo claims the worlds strongest truck with their FH16 700. An inline 6 cylinder, 16 litre 700hp diesel engine producing 3150 Nm (2323 lb-ft) of torque and fully complying with Euro 5 emission standards.^[6]

[edit] How diesel engines work

Diesel engine model, leftside

Diesel engine model, rightside

The diesel internal combustion engine differs from the gasoline powered Otto cycle by using a higher compression of the air to ignite the fuel rather than using a spark plug ("compression ignition" rather than "spark ignition").

In the diesel engine, only air is introduced into the combustion chamber. The air is then compressed with a compression ratio typically between 15 and 22 resulting into a 40 bar (about 600 psi) pressure compared to 14 bar (about 200 psi) in the gasoline engine. This high compression heats the air to 550 °C (about 1000 °F). At about this moment (the exact moment is determined by the fuel injection timing of the fuel system), fuel is injected directly into the compressed air in the combustion chamber. This may be into a (typically toroidal) void in the top of the piston or a 'pre-chamber' depending upon the design of the engine. The fuel injector ensures that the fuel is broken down into small droplets, and that the fuel is distributed as evenly as possible. The more modern the engine, the smaller, more numerous and better distributed are the droplets. The heat of the compressed air vaporises fuel from the surface of the droplets. The vapour is then ignited by the heat from the compressed air in the combustion chamber, the droplets continue to vaporise from their surfaces and burn, getting smaller, until all the fuel in the droplets has been burnt. The start of vaporisation causes a delay period during ignition, and the characteristic diesel knocking sound as the vapour reaches ignition temperature and causes an abrupt increase in pressure above the piston. The rapid expansion of combustion gases then drives the piston downward, supplying power to the crankshaft.^[7]

As well as the high level of compression allowing combustion to take place without a separate ignition system, a high compression ratio greatly increases the engine's efficiency. Increasing the compression ratio in a spark-ignition engine where fuel and air are mixed before entry to the cylinder is limited by the need to prevent damaging pre-ignition. Since only air is compressed in a diesel engine, and fuel is not introduced into the cylinder until shortly before top dead center (TDC), premature detonation is not an issue and compression ratios are much higher.

[edit] Early fuel injection systems

Diesel's original engine injected fuel with the assistance of compressed air, which atomized the fuel and forced it into the engine through a nozzle (a similar principle to an aerosol spray). The nozzle opening was closed by a pin valve lifted by the camshaft to initiate the fuel injection before (TDC) (top dead center). This is called an air-blast injection. Driving the three stage compressor used some power but the efficiency and net power output was more than any other combustion engine at that time. Diesel engines in service today raise the fuel to extreme pressures by mechanical pumps and deliver it to the combustion chamber by pressure-activated injectors without compressed air. With direct injected diesels, injectors spray fuel through six or more small orifices in its nozzle. The early air injection diesels always had a superior combustion without the sharp increase in pressure during combustion. Interestingly research is performed and patents are taken out to use some form of air injection to reduce the nitrogen oxides and pollution, reverting to Diesels original implementation with its superior combustion. In all major aspects, it holds true to Rudolf Diesel's original design, that of igniting fuel by compression at an extremely high pressure within the cylinder. With much higher pressures and high technology injectors present-day diesel engines use the so-called solid injection system applied by Herbert Akroyd Stuart for his hot bulb engine. Indirect injection engine could be considered the latest development of these low speed "hot bulb" ignition engines.

[edit] Cold weather

[edit] Starting

In cold weather high speed diesel engines, which are mostly prechambered, can be difficult to start because the mass of the cylinder block and cylinder head absorb the heat of compression, preventing ignition because of the higher surface to volume ratio. Prechambered engines therefore make use of small electric heaters inside the prechambers called glow plugs. These engines also generally have a higher compression ratio of 19:1 to 21:1. Low speed and compressed air started larger and intermediate speed diesels do not have glowplugs and compression ratios are around 16:1. Some engines use resistive grid heaters in the intake manifold to warm the inlet air until the engine reaches operating temperature. Engine block heaters (electric resistive heaters in the engine block) connected to the utility grid are often used when an engine is turned off for extended periods (more than an hour) in cold weather to reduce startup time and engine wear. In the past, a wider variety of cold-start methods were used. Some engines, such as Detroit Diesel engines and Lister-Petter engines, used a system to introduce small amounts of ether into the inlet manifold to start combustion. Saab marine engines, Field Marshall tractors (among others) used slow-burning solid-fuel 'cigarettes' which were fitted into the cylinder head as a primitive glow plug. Lucas developed the 'Thermostart', where an electrical heating element was combined with a small fuel valve. Diesel fuel slowly dripped from the valve onto the hot element and ignited. The flame heated the inlet manifold and when the engine was turned over the flame was drawn into the combustion chamber to start combustion. International Harvester developed a WD-40 tractor in the 1930s that had a 7-liter 4-cylinder engine which ran as a diesel, but was started as a gasoline engine. The cylinder head had valves which opened for a portion of the compression stroke to reduce the effective compression ratio, and a magneto produced the spark. An automatic ratchet system automatically disengaged the ignition system and closed the valves once the engine had run for 30 seconds. The operator then switched off the gasoline fuel system and opened the throttle on the diesel injection system. Recently direct-injection systems advanced to the extent that prechambers systems were not needed using a common rail with electronic fuel injection.

[edit] Gelling

Diesel fuel is also prone to "waxing" or "gelling" in cold weather, terms for the solidification of diesel oil into a partially crystalline state. The crystals build up in the fuel line (especially in fuel filters), eventually starving the engine of fuel and causing it to stop running. Low-output electric heaters in fuel tanks and around fuel lines are used to solve this problem. Also, most engines have a "spill return" system, by which any excess fuel from the injector pump and injectors is returned to the fuel tank. Once the engine has warmed, returning warm fuel prevents waxing in the tank. Due to improvements in fuel technology, with additives waxing rarely occurs in all but the coldest weather when a mix of diesel and kerosene should be used to run a vehicle.

[edit] Fuel delivery

A vital component of all diesel engines is a mechanical or electronic governor which regulates the idling speed and maximum speed of the engine by controlling the rate of fuel delivery. Unlike Otto-cycle engines, incoming air is not throttled and a diesel engine without a governor can not have a stable idling speed and can easily overspeed, resulting in its destruction. Mechanically governed fuel injection systems are driven by the engine's gear train. ^[8] These systems use a combination of springs and weights to control fuel delivery relative to both load and speed. ^[8] Modern, electronically controlled diesel engines control fuel delivery by use of an electronic control module (ECM) or electronic control unit (ECU). The ECM/ECU receives an engine speed signal, as well as other operating parameters such as intake manifold pressure and fuel temperature, from a sensor and controls the amount of fuel and start of injection timing through actuators to maximize power and efficiency and minimize emissions. Controlling the timing of the start of injection of fuel into the cylinder is a key to minimizing emissions, and maximizing fuel economy (efficiency), of the engine. The timing is measured in degrees of crank angle of the piston before top dead center. For example, if the ECM/ECU initiates fuel injection when the piston is 10 degrees before TDC, the start of injection, or timing, is said to be 10° BTDC. Optimal timing will depend on the engine design as well as its speed and load. Advancing the start of injection (injecting before the piston reaches TDC) results in higher in-cylinder pressure and temperature, and higher efficiency, but also results in elevated engine noise and increased oxides of nitrogen (NO_x) emissions due to higher combustion temperatures. Delaying start of injection causes incomplete combustion, reduced fuel efficiency and an increase in exhaust smoke, containing a considerable amount of particulate matter and unburned hydrocarbons .

[edit] Major advantages

Diesel engines have several advantages over other internal combustion engines.

• They burn less fuel than a gasoline engine performing the same work, due to the engine's high efficiency and diesel fuel's higher energy density than gasoline.^[9]
• They have no high-tension electrical ignition system to attend to, resulting in high reliability and easy adaptation to damp environments.
• They can deliver much more of their rated power on a continuous basis than a gasoline engine.
• The life of a diesel engine is generally about twice as long as that of a gasoline engine ^[10] due to the increased strength of parts used, also because diesel fuel has better lubrication properties than gasoline.
• Diesel fuel is considered safer than gasoline in many applications. Although diesel fuel will burn in open air using a wick, it will not explode and does not release a large amount of flammable vapour.
• For any given partial load the fuel efficiency (kg burned per kWh produced) of a diesel engine remains nearly constant, as opposed to gasoline and turbine engines which use proportionally more fuel with partial power outputs. ^{[11][12][13][14]}
• They generate less waste heat (btu) in cooling and exhaust.^[9]
• With a diesel, boost pressure is essentially unlimited.
• The carbon monoxide content of the exhaust is minimal, therefore diesel engines are used in underground mines.^[15]

[edit] Mechanical and electronic injection

Many configurations of fuel injection have been used over the past century (1900–2000).

Most present day (2008) diesel engines make use of a camshaft, rotating at half crankshaft speed, lifted mechanical single plunger high pressure fuel pump driven by the engine crankshaft. For each cylinder, its plunger measures the amount of fuel and determines the timing of each injection. These engines use injectors that are basically very precise spring-loaded valves that open and close at a specific fuel pressure. For each cylinder a plunger pump is connected with an injector with a high pressure fuel line. Fuel volume for each single combustion is controlled by a slanted groove in the plunger which rotates only a few degrees releasing the pressure and is controlled by a mechanical governor, consisting of weights rotating at engine speed constrained by springs and a lever. The injectors are held open by the fuel pressure. On high speed engines the plunger pumps are together in one unit.^[16] Each fuel line should have the same length to obtain the same pressure delay.
A cheaper configuration on high speed engines with less than six cylinders is to use an axial-piston distributor pump ,consisting of one rotating pump plunger delivering fuel to a valve and line for each cylinder (functionally analogous to points and distributor cap on an Otto engine).^[8] This contrasts with the more modern method of having a single fuel pump which supplies fuel constantly at high pressure with a common rail (single fuel line common) to each injector. Each injector has a solenoid operated by an electronic control unit, resulting in more accurate control of injector opening times that depend on other control conditions, such as engine speed and loading, and providing better engine performance and fuel economy. This design is also mechanically simpler than the combined pump and valve design, making it generally more reliable, and less noisy, than its mechanical counterpart.

Both mechanical and electronic injection systems can be used in eitherdirect or indirect injection configurations.

Older diesel engines with mechanical injection pumps could be inadvertently run in reverse, albeit very inefficiently, as witnessed by massive amounts of soot being ejected from the air intake. This was often a consequence of push starting a vehicle using the wrong gear. Large ship diesels can run either way.

[edit] Indirect injection

An indirect injection diesel engine delivers fuel into a chamber off the combustion chamber, called a prechamber or ante-chamber, where combustion begins and then spreads into the main combustion chamber, assisted by turbulence created in the chamber. This system allows for a smoother, quieter running engine, and because combustion is assisted by turbulence, injector pressures can be lower, about 100 bar using a single orifice tapered jet injector . Mechanical injection systems allowed high-speed running suitable for road vehicles (typically up to speeds of around 4,000 rpm). The prechamber had the disadvantage of increasing heat loss to the engine's cooling system, and restricting the combustion burn, which reduced the efficiency by 5%–10%.^[17] Indirect injection engines were used in small-capacity, high-speed diesel engines in automotive, marine and construction uses from the 1950s, until direct injection technology advanced in the 1980s. Indirect injection engines are cheaper to build and it is easier to produce smooth, quiet-running vehicles with a simple mechanical system. In road-going vehicles most prefer the greater efficiency and better controlled emission levels of direct injection.

[edit] Direct injection

Modern diesel engines make use of one of the following direct injection methods:

Direct injection injectors are mounted in the top of the combustion chamber. The problem with these vehicles was the harsh noise that they made. Fuel consumption was about 15 to 20 percent lower than indirect injection diesels, which for some buyers was enough to compensate for the extra noise.

This type of engine was transformed by electronic control of the injection pump, pioneered by the Volkswagen Group in 1989. The injection pressure was still only around 300 bar (4350 psi), but the injection timing, fuel quantity, EGR and turbo boost were all electronically controlled. This gave more precise control of these parameters which made refinement more acceptable and emissions lower.

[edit] Unit direct injection

Unit direct injection also injects fuel directly into the cylinder of the engine. In this system the injector and the pump are combined into one unit positioned over each cylinder controlled by the camshaft. Each cylinder has its own unit eliminating the high pressure fuel lines, achieving a more consistent injection. This type of injection system, also developed by Bosch, is used by Volkswagen AG in cars (where it is called a Pumpe-Düse-System—literally "pump-nozzle system") and by Mercedes Benz ("PLD") and most major diesel engine manufacturers in large commercial engines (CAT, Cummins, Detroit Diesel, Volvo). With recent advancements, the pump pressure has been raised to 2,050 bar (30127 psi), allowing injection parameters similar to common rail systems.^[18]

[edit] Common rail direct injection

In common rail systems, the separate pulsing high pressure fuel line to each cylinder injector is also eliminated. Instead, a high-pressure pump pressurises fuel at up to 2,000 bar (200 MPa, 30000 psi),^[19] in a "common rail". The common rail is a tube that supplies each computer-controlled injector containing a precision-machined nozzle and a plunger driven by a solenoid or piezoelectric actuator.

[edit] Types

[edit] Early

Rudolf Diesel intended his engine to replace the steam engine as the primary power source for industry. As such, diesel engines in the late 19th and early 20th centuries used the same basic layout and form as industrial steam engines, with long-bore cylinders, external valve gear, cross-head bearings and an open crankshaft connected to a large flywheel. Smaller engines would be built with vertical cylinders, while most medium- and large-sized industrial engines were built with horizontal cylinders, just as steam engines had been. Engines could be built with more than one cylinder in both cases. The largest early diesels resembled the triple-expansion reciprocating engine steam engine, being tens of feet high with vertical cylinders arranged in-line. These early engines ran at very slow speeds—partly due to the limitations of their air-blast injector equipment and partly so they would be compatible with the majority of industrial equipment designed for steam engines; maximum speeds of between 100 and 300 rpm were common. Engines were usually started by allowing compressed air into the cylinders to turn the engine, although smaller engines could be started by hand.^[20]

In the early decades of the 20th century, when large diesel engines were first being used, the engines took a form similar to the compound steam engines common at the time, with the piston being connected to the connecting rod via a crosshead bearing. Following steam engine practice some manufactures made double-acting two-stroke and four-stroke diesel engines to increase power output, with combustion taking place on both sides of the piston, with two sets of valve gear and fuel injection. While it produced large amounts of power and was very efficient, the double-acting diesel engine's main problem was producing a good seal where the piston rod passed through the bottom of the lower combustion chamber to the crosshead bearing, and no more were built. By the 1930s turbochargers were fitted to some engines. Crosshead bearings are still used to reduce the wear on the cylinders in large long-stroke main marine engines.

[edit] Modern

As with gasoline engines, there are two classes of diesel engines in current use: two-stroke and four-stroke. The four-stroke type is the "classic" version, tracing its lineage back to Rudolf Diesel's prototype. It is also the most commonly used form, being the preferred power source for many motor vehicles, especially buses and trucks. Much larger engines, such as used for railroad locomotion and marine propulsion, are often two-stroke units, offering a more favorable power-to-weight ratio, as well as better fuel economy. The most powerful engines in the world are two-stroke diesels of mammoth proportions.^[21]

Two-stroke diesel operation is similar to that of gasoline counterparts, except that fuel is not mixed with air prior to induction, and the crankcase does not take an active role in the cycle. The traditional two-stroke design relies upon a mechanically driven positive displacement blower to charge the cylinders with air prior to compression and ignition. The charging process also assists in expelling (scavenging) combustion gases remaining from the previous power stroke. The archetype of the modern form of the two stroke Diesel is the Detroit Diesel engine, in which the blower pressurizes a chamber in the engine block that is often referred to as the "air box". The (much larger) Electromotive prime mover utilized in EMD Diesel-electric locomotives is built to the same principle.

In a two-stroke diesel engine, as the cylinder's piston approaches the bottom dead center exhaust ports or valves are opened relieving most of the excess pressure after which a passage between the air box and the cylinder is opened, permitting air flow into the cylinder.^[22][23][24] The air flow blows the remaining combustion gasses from the cylinder—this is the scavenging process. As the piston passes through bottom center and starts upward, the passage is closed and compression commences, culminating in fuel injection and ignition. Refer to two-stroke Diesel engines for more detailed coverage of aspiration types and supercharging of two-stroke engine.

Normally, the number of cylinders are used in multiples of two, although any number of cylinders can be used as long as the load on the crankshaft is counterbalanced to prevent excessive vibration. The inline-six cylinder design is the most prolific in light to medium-duty engines, though small V8 and larger inline-four displacement engines are also common. Small-capacity engines (generally considered to be those below five litres in capacity) are generally four or six cylinder types, with the four cylinder being the most common type found in automotive uses. Five cylinder diesel engines have also been produced, being a compromise between the smooth running of the six cylinder and the space-efficient dimensions of the four cylinder. Diesel engines for smaller plant machinery, boats, tractors, generators and pumps may be four, three or two cylinder types, with the single cylinder diesel engine remaining for light stationary work. Direct reversible two stroke marine diesels need at least three cylinders for reliable restarting forwards and reverse. Four cycle engines need at least six cylinders, repeated power strokes at 120 degrees.

The desire to improve the diesel engine's power-to-weight ratio produced several novel cylinder arrangements to extract more power from a given capacity. The Napier Deltic engine, with three cylinders arranged in a triangular formation, each containing two opposed-action pistons, the whole engine having three crankshafts, is one of the better known. The Commer van company of the United Kingdom used a similar design for road vehicles, designed by Tillings-Stevens, member of the Rootes Group, the TS3. The Commer TS3 engine had 3 horizontal in-line cylinders, each with two opposed action pistons that worked through rocker arms, to connecting rods and had one crankshaft. While both these designs succeeded in producing greater power for a given capacity, they were complex and expensive to produce and operate, and when turbocharger technology improved in the 1960s, this was found to be a much more reliable and simple way of extracting more power.

[edit] Gas generator

As a footnote, prior to 1950, Sulzer started experimenting with two-stroke engines with boost pressures as high as 6 atmospheres, in which all of the output power was taken from an exhaust gas turbine. The two-stroke pistons directly drove air compressor pistons to make a positive displacement gas generator. Opposed pistons were connected by linkages instead of crankshafts. Several of these units could be connected together to provide power gas to one large output turbine. The overall thermal efficiency was roughly twice that of a simple gas turbine ^[25]. This system was derived from Raúl Pateras Pescara's work on free-piston engines in the 1930s.

[edit] Advantages and disadvantages versus spark-ignition engines

[edit] Power and fuel economy

The MAN S80ME-C7 low speed diesel engines use 155 gram fuel per kWh for an overall energy conversion efficiency of 54.4%, which is the highest conversion of fuel into power by any internal or external combustion engine.^[9] Diesel engines are more efficient than gasoline (petrol) engines of the same power, resulting in lower fuel consumption. A common margin is 40% more miles per gallon for an efficient turbodiesel. For example, the current model Škoda Octavia, using Volkswagen Group engines, has a combined Euro rating of 6.2 L/100 km (38 miles per US gallon) for the 102 bhp (76 kW) petrol engine and 4.4 L/100 km (54 mpg) for the 105 bhp (78 kW) diesel engine. However, such a comparison doesn't take into account that diesel fuel is denser and contains about 15% more energy by volume. Although the calorific value of the fuel is slightly lower at 45.3 MJ/kg (megajoules per kilogram) than gasoline at 45.8 MJ/kg, liquid diesel fuel is significantly denser than liquid gasoline. This is important because volume of fuel, in addition to mass, is an important consideration in mobile applications. No vehicle has an unlimited volume available for fuel storage.

Adjusting the numbers to account for the energy density of diesel fuel, the overall energy efficiency is still about 20% greater for the diesel version.

While higher compression ratio is helpful in raising efficiency, diesel engines are much more efficient than gasoline (petrol) engines when at low power and at engine idle. Unlike the petrol engine, diesels lack a butterfly valve (throttle) in the inlet system, which closes at idle. This creates parasitic loss and destruction of availability on the incoming air, reducing the efficiency of petrol/gasoline engines at idle. In many applications, such as marine, agriculture, and railways, diesels are left idling unattended for many hours or sometimes days. These advantages are especially attractive in locomotives (see dieselisation).

Weight can be an issue, since diesel engines are typically heavier than gasoline engines of similar power output. This is essentially because the diesel must operate at lower engine speeds.^[26] Diesel fuel is injected just before the power stroke. As a result of this, the fuel cannot burn completely until it has encountered the right amount of oxygen. This results in incomplete combustion with too much fuel, poor design or failing injectors resulting in black exhaust. In the gasoline engine, air and fuel are mixed for the entire compression stroke, ensuring complete mixing even at higher engine speeds.

Diesel engines usually have longer stroke lengths to achieve the necessary compression ratios. As a result piston and connecting rods are heavier and more force must be transmitted through the connecting rods and crankshaft to change the momentum of the piston. This is another reason that a diesel engine must be stronger for the same power output.

Yet it is this same build quality that has allowed some enthusiasts to acquire significant power increases with turbocharged engines through fairly simple and inexpensive modifications. A gasoline engine of similar size cannot put out a comparable power increase without extensive alterations because the stock components would not be able to withstand the higher stresses placed upon them. Since a diesel engine is already built to withstand higher levels of stress, it makes an ideal candidate for performance tuning with little expense. However, it should be said that any modification that raises the amount of fuel and air put through a diesel engine will increase its operating temperature which will reduce its life and increase service requirements. These are issues with newer, lighter, high performance diesel engines which are not "overbuilt" to the degree of older engines and are being pushed to provide greater power in smaller engines. The addition of a turbocharger or supercharger to the engine greatly assists in increasing fuel economy and power output, mitigating the fuel-air intake speed limit mentioned above for a given engine displacement. Boost pressures can be higher on diesels than gasoline engines, due to the latter's susceptibility to knock, and the higher compression ratio allows a diesel engine to be more efficient than a comparable spark ignition engine. Because the burned gases are expanded further in a diesel engine cylinder, the exhaust gas is cooler, meaning turbochargers require less cooling, and can be more reliable, than on spark-ignition engines.

With a diesel, boost pressure is essentially unlimited. It is literally possible to run as much boost as the engine will physically stand before breaking apart. Consequently, engine designers have come to realize that diesels are capable of substantially more power and torque than any comparably sized gasoline engine.^[27]

The increased fuel economy of the diesel engine over the gasoline engine means that the diesel produces less carbon dioxide (CO₂) per unit distance. Recently, advances in production and changes in the political climate have increased the availability and awareness of biodiesel, an alternative to petroleum-derived diesel fuel with a much lower net-sum emission of CO₂, due to the absorption of CO₂ by plants used to produce the fuel. Although concerns are now being raised as to the negative effect this is having on the world food supply, as the growing of crops specifically for biofuels takes up land that could be used for food crops and uses water that could be used by both humans and animals. The use of waste vegetable oil, sawmill waste from managed forests in Finland funded by Nokia venture capital, and the development of the production of vegetable oil from algae, demonstrate great promise in providing feed stocks for sustainable biodiesel, that are not in competition with food production.

Diesel engines have lower power output than equivalent size petrol engine because its speed is limited by the time required for combustion.^[28] A combination of improved mechanical technology (such as multi-stage injectors which fire a short "pilot charges" of fuel into the cylinder to warm the combustion chamber before delivering the main fuel charge), higher injection pressures that have improved the atomisation of fuel into smaller droplets, and electronic control (which can adjust the timing and length of the injection process to optimise it for all speeds and temperatures), have mostly mitigated these problems in the latest generation of common-rail designs, while greatly improving engine efficiency. Poor power and narrow torque bands have been addressed by the use of superchargers, turbochargers, (especially variable geometry turbochargers), intercoolers, and a large efficiency increase from about 35% for IDI to 45% for the latest engines in the last 15 years.

Even though diesel engines have a theoretical fuel efficiency of 75%, in practice it is less. Engines in large diesel trucks, buses, and newer diesel cars can achieve peak efficiencies around 45%,^[29] and could reach 55% efficiency in the near future.^[30] However, average efficiency over a driving cycle is lower than peak efficiency. For example, it might be 37% for an engine with a peak efficiency of 44%. ^[31]

[edit] Emissions

Diesel engines produce very little carbon monoxide as they burn the fuel in excess air even at full load, at which point the quantity of fuel injected per cycle is still about 50% lean of stoichiometric. However, they can produce black soot (or more specifically diesel particulate matter) from their exhaust, which consists of unburned carbon compounds. This is caused by local low temperatures where the fuel is not fully atomized. These local low temperatures occur at the cylinder walls and at the outside of large droplets of fuel. At these areas where it is relatively cold, the mixture is rich (contrary to the overall mixture which is lean). The rich mixture has less air to burn and some of the fuel turns into a carbon deposit. Modern car engines use a diesel particulate filter (DPF) to capture carbon particles and then intermittently burn them using extra fuel injected into the engine.

The full load limit of a diesel engine in normal service is defined by the "black smoke limit". Beyond which point the fuel cannot be completely combusted, as the "black smoke limit" is still considerably lean of stoichiometric. It is possible to obtain more power by exceeding it, but the resultant inefficient combustion means that the extra power comes at the price of reduced combustion efficiency, high fuel consumption and dense clouds of smoke. This is only done in specialized applications (such as tractor pulling competitions) where these disadvantages are of little concern.

Likewise, when starting from cold, the engine's combustion efficiency is reduced because the cold engine block draws heat out of the cylinder in the compression stroke. The result is that fuel is not combusted fully, resulting in blue/white smoke and lower power outputs until the engine has warmed through. This is especially the case with indirect injection engines, which are less thermally efficient. With electronic injection, the timing and length of the injection sequence can be altered to compensate for this. Older engines with mechanical injection can have mechanical and hydraulic governor control to alter the timing, and multi-phase electrically controlled glow plugs, that stay on for a period after start-up to ensure clean combustion—the plugs are automatically switched to a lower power to prevent them burning out.

Particles of the size normally called PM10 (particles of 10 micrometres or smaller) have been implicated in health problems, especially in cities. Some modern diesel engines feature diesel particulate filters, which catch the black soot and when saturated are automatically regenerated by burning the particles. Other problems associated with the exhaust gases (nitrogen oxides, sulfur oxides) can be mitigated with further investment and equipment; some diesel cars now have catalytic converters in the exhaust.

All diesel engine exhaust emissions can be significantly reduced by the use of biodiesel fuel. Oxides of nitrogen do increase from a vehicle using biodiesel, but they too can be reduced to levels below that of fossil fuel diesel, by changing fuel injection timing.

[edit] Power and torque

For commercial uses requiring towing, load carrying and other tractive tasks, diesel engines tend to have better torque characteristics. Diesel engines tend to have their torque peak quite low in their speed range (usually between 1600–2000 rpm for a small-capacity unit, lower for a larger engine used in a truck). This provides smoother control over heavy loads when starting from rest, and, crucially, allows the diesel engine to be given higher loads at low speeds than a gasoline engine, making them much more economical for these applications. This characteristic is not so desirable in private cars, so most modern diesels used in such vehicles use electronic control, variable geometry turbochargers and shorter piston strokes to achieve a wider spread of torque over the engine's speed range, typically peaking at around 2500–3000 rpm.

[edit] Noise

The characteristic noise of a diesel engine is a contributor to low consumer acceptance of diesel engines for passenger cars. This noise is variably called diesel clatter, diesel nailing, or diesel knock.^[32] Diesel clatter is caused largely by the diesel combustion process, the sudden ignition of the diesel fuel when injected into the combustion chamber causes a pressure wave. Engine designers can reduce diesel clatter through: indirect injection; pilot or pre-injection; injection timing; injection rate; compression ratio; turbo boost; and exhaust gas recirculation (EGR).^[33] Common rail diesel injection systems permit multiple pre-injections as an aid to noise reduction. Diesel fuels with a higher cetane rating modify the combustion process and reduce diesel clatter.^[32] CN (Cetane number) can be raised by distilling higher quality crude oil, or by using a cetane improving additive. Some oil companies market high cetane or premium diesel. Biodiesel has a higher cetane number than petrodiesel, typically 55CN for 100% biodiesel.^{[citation needed]}

A combination of improved mechanical technology such as multi-stage injectors which fire a short "pilot charges" of fuel into the cylinder to initiate combustion before delivering the main fuel charge, higher injection pressures that have improved the atomisation of fuel into smaller droplets, and electronic control (which can adjust the timing and length of the injection process to optimise it for all speeds and temperatures), have mostly mitigated these problems in the latest generation of common-rail designs, while improving engine efficiency.

[edit] Reliability

The lack of an electrical ignition system greatly improves the reliability. The high durability of a diesel engine is also due to its overbuilt nature (see above) as well as the diesel's combustion cycle, which creates less-violent changes in pressure when compared to a spark-ignition engine, a benefit that is magnified by the lower rotating speeds in diesels. Diesel fuel is a better lubricant than gasoline so is less harmful to the oil film on piston rings and cylinder bores; it is routine for diesel engines to cover 250,000 miles (400,000 km) or more without a rebuild.

Due to the greater compression force required and the increased weight of the stronger components, starting a diesel engine is harder. More torque is required to push the engine through compression.

Either an electrical starter or an air start system is used to start the engine turning. On large engines, pre-lubrication and slow turning of an engine, as well as heating, are required to minimize the amount of engine damage during initial start-up and running. Some smaller military diesels can be started with an explosive cartridge, called a Coffman starter, which provides the extra power required to get the machine turning. In the past, Caterpillar and John Deere used a small gasoline pony motor in their tractors to start the primary diesel motor. The pony motor heated the diesel to aid in ignition and utilized a small clutch and transmission to actually spin up the diesel engine. Even more unusual was an International Harvester design in which the diesel motor had its own carburetor and ignition system, and started on gasoline. Once warmed up, the operator moved two levers to switch the motor to diesel operation, and work could begin. These engines had very complex cylinder heads, with their own gasoline combustion chambers, and in general were vulnerable to expensive damage if special care was not taken (especially in letting the engine cool before turning it off).

As mentioned above, diesel engines tend to have more torque at lower engine speeds than gasoline engines. However, diesel engines tend to have a narrower power band than gasoline engines. Naturally-aspirated diesels tend to lack power and torque at the top of their speed range. This narrow band is a reason why a vehicle such as a truck may have a gearbox with as many as 18 or more gears, to allow the engine's power to be used effectively at all speeds. Turbochargers tend to improve power at high engine speeds; superchargers improve power at lower speeds; and variable geometry turbochargers improve the engine's performance equally by flattening the torque curve.

[edit] Quality and variety of fuels

Petrol/gasoline engines are limited in the variety and quality of the fuels they can burn. Older petrol engines fitted with a carburetor required a volatile fuel that would vaporize easily to create the necessary fuel/air mix for combustion. Because both air and fuel are admitted to the cylinder, if the compression ratio of the engine is too high or the fuel too volatile (with too low an octane rating), the fuel will ignite under compression, as in a diesel engine, before the piston reaches the top of its stroke. This pre-ignition causes a power loss and over time major damage to the piston and cylinder. The need for a fuel that is volatile enough to vaporize but not too volatile (to avoid pre-ignition) means that petrol engines will only run on a narrow range of fuels. There has been some success at dual-fuel engines that use gasoline/ethanol, gasoline/propane, and gasoline/methane.

In diesel engines, a mechanical injector system vaporizes the fuel into a pre-combustion chamber (as opposed to a Venturi jet in a carburetor, or a Fuel injector in a fuel injection system vaporizing fuel into the intake manifold or intake runners as in a petrol engine). This forced vaporisation means that less-volatile fuels can be used. More crucially, because only air is inducted into the cylinder in a diesel engine, the compression ratio can be much higher as there is no risk of pre-ignition provided the injection process is accurately timed. This means that cylinder temperatures are much higher in a diesel engine than a petrol engine, allowing less-combustible fuels to be used.

Diesel fuel is a form of light fuel oil, very similar to kerosene, but diesel engines, especially older or simple designs that lack precision electronic injection systems, can run on a wide variety of other fuels. Some of the most common alternatives are Jet A-1 or vegetable oil from a very wide variety of plants. Some engines can be run on vegetable oil without modification, and most others require fairly basic alterations. Biodiesel is a pure diesel-like fuel refined from vegetable oil and can be used in nearly all diesel engines. The only limits on the fuels used in diesel engines are the ability of the fuel to flow along the fuel lines and the ability of the fuel to lubricate the injector pump and injectors adequately. In general terms, inline mechanical injector pumps tolerate poor-quality or bio-fuels better than distributor-type pumps. Also, indirect injection engines generally run more satisfactorily on bio-fuels than direct injection engines. This is partly because an indirect injection engine has a much greater 'swirl' effect, improving vaporisation and combustion of fuel, and also because (in the case of vegetable oil-type fuels) lipid depositions can condense on the cylinder walls of a direct-injection engine if combustion temperatures are too low (such as starting the engine from cold).

At the request of the French Government the Otto company demonstrated a diesel engine at the 1900 Exposition Universelle (World's Fair) which used peanut oil (see biodiesel). The French government were at the time exploring the possibility of using peanut oil as a locally produced fuel in their African colonies. Diesel himself later tested extensively the use of plant oils in his engine and began to actively promote the use of these fuels.

Most large marine diesels (often called cathedral engines due to their size) run on heavy fuel oil (sometimes called "bunker oil"), which is a thick, viscous and almost un-flammable fuel which is very safe to store and cheap to buy in bulk as it is a waste product from the petroleum refining industry. The fuel must be heated to thin it out (often by the exhaust header) and is often passed through multiple injection stages to vaporize it.

[edit] Fuel and fluid characteristics

Diesel engines can operate on a variety of different fuels, depending on configuration, though the eponymous diesel fuel derived from crude oil is most common. The engines can work with the full spectrum of crude oil distillates, from natural gas, alcohols, gasoline, wood gas to the fuel oils from diesel oil to residual fuels.^[34]

The type of fuel used is a combination of service requirements, and fuel costs. Good-quality diesel fuel can be synthesised from vegetable oil and alcohol. Diesel fuel can be made from coal or other carbon base using the Fischer-Tropsch process. Biodiesel is growing in popularity since it can frequently be used in unmodified engines, though production remains limited. Recently, Biodiesel from coconut, which can produce a very promising coco methyl esther (CME), has characteristics which enhance lubricity and combustion giving a regular diesel engine without any modification more power, less particulate matter or black smoke, and smoother engine performance. The Philippines pioneers in the research on Coconut based CME with the help of German and American scientists. Petroleum-derived diesel is often called petrodiesel if there is need to distinguish the source of the fuel.

Pure plant oils are increasingly being used as a fuel for cars, trucks and remote combined heat and power generation especially in Germany where hundreds of decentralised small- and medium-sized oil presses cold press oilseed, mainly rapeseed, for fuel. There is a Deutsches Institut für Normung fuel standard for rapeseed oil fuel.

Residual fuels are the "dregs" of the distillation process and are a thicker, heavier oil, or oil with higher viscosity, which are so thick that they are not readily pumpable unless heated. Residual fuel oils are cheaper than clean, refined diesel oil, although they are dirtier. Their main considerations are for use in ships and very large generation sets, due to the cost of the large volume of fuel consumed, frequently amounting to many tonnes per hour. The poorly refined biofuels straight vegetable oil (SVO) and waste vegetable oil (WVO) can fall into this category, but can be viable fuels on non common rail or TDI PD diesels with the simple conversion of fuel heating to 80 to 100 degrees Celsius to reduce viscosity, and adequate filtration to OEM standards. Engines using these heavy oils have to start and shut down on standard diesel fuel ,as these fuels will not flow through fuel lines at low temperatures. Moving beyond that, use of low-grade fuels can lead to serious maintenance problems because of their high sulfur content. Most diesel engines that power ships like supertankers are built so that the engine can safely use low-grade fuels due to their separate cylinder and crankcase lubrication.

Normal diesel fuel is more difficult to ignite and slower in developing fire than gasoline because of its higher flash point, but once burning, a diesel fire can be fierce.

[edit] Safety

The diesel engine is a very safe type of engine. Diesel engines are equipped with a mechanical or electronic governor to control minimum and maximum rpm^[8], which makes Diesel engine runaway unlikely. The fuel is barely flammable so fire risk is low.

[edit] Yachts

In yachts diesels are used because petrol engines generate combustible vapors, which can accumulate in the bottom of the vessel, sometimes causing explosions. Therefore ventilation systems on petrol powered vessels are required.^[35]

[edit] Military vehicle safety

The US Army and NATO use only diesel fuel engines and turbines because of fire hazard. Diesel does not explode in a manner such as gasoline does, it just slowly burns. US Army gasoline-engined tanks during World War II were nicknamed Ronsonlighters, because it only took a single spark to ignite 50 or more gallons of highly volatile gasoline.

[edit] Diesel applications

Use of the diesel engine is highly dependent on local conditions and the specific application. Applications which require the diesel's reliability and high torque output (such as tractors, trucks, heavy equipment, most buses etc.) are found practically worldwide (obviously these applications also benefit from the diesel's improved fuel economy). Local conditions such as fuel prices play a big part in the acceptance of the diesel engine—for example, in Europe most tractors were diesel-powered by the end of the 1950s, whilst in the U.S. diesel did not dominate the market until the 1970s. Similarly, around 40% of all the cars sold in Europe (where fuel prices are high) are diesel-powered, and are promoted as the low CO₂ emission option.

Besides their use in merchant ships and boats, there is also a naval advantage in the relative safety of diesel fuel, additional to improved range over a gasoline engine. The German "pocket battleships" were the largest diesel warships, but the German torpedo-boats known as E-boats (Schnellboot) of the Second World War were also diesel craft. Conventional submarines have used them since before the First World War. American World War II diesel-electric submarines operated on two-stroke cycle as opposed to the four-stroke cycle that other navies used.

Mercedes-Benz, cooperating with Robert Bosch GmbH, has had a successful run of diesel-powered passenger cars since 1936, sold in many parts of the World, with other manufacturers joining in the 1970s and 1980s. Other car manufacturers followed, Borgward in 1952, Fiat in 1953 and Peugeot in 1958.

In the United States, diesel is not as popular in passenger cars as in Europe. Such cars have been traditionally perceived as heavier, noisier, having performance characteristics which make them slower to accelerate, sootier, smellier, and of being more expensive than equivalent gasoline vehicles. From the late seventies to the mid-eighties, General Motors' Oldsmobile, Cadillac, and Chevrolet divisions produced a low-powered and unreliable V8 diesel engine which generally serves as the prime example for this reputation. Dodge with its ever-famous Cummins inline-six diesels optioned in pickup trucks (since about the late 1980s) really revitalized the appeal for diesel power in light vehicles among American consumers, but a superior and widely-accepted American regular-production diesel passenger car never materialized. Ford Motor Company tried diesel engines in some passenger cars in the 1980s, but to not much avail. In addition, before the introduction of 15 parts per million ultra-low sulfur diesel, which started at 15 October 2006 in the U.S. (1 June 2006 in Canada), diesel fuel used in North America still had higher sulfur content than the fuel used in Europe, effectively limiting diesel use to industrial vehicles, which had further contributed to the negative image. Ultra-low sulfur diesel is not mandatory until 2010 in the US. This image does not reflect recent designs, especially where the very high low-rev torque of modern diesels is concerned—which have characteristics similar to the big V8 gasoline engines popular in the US. Light and heavy trucks, in the U.S., have been diesel-optioned for years. After the introduction of ultra-low sulfur diesel, Mercedes-Benz has marketed passenger vehicles under the BlueTec banner. In addition, other manufacturers such as Ford, General Motors, Honda, Subaru, Audi, Volkswagen, BMW, and Nissan plan to sell Diesel vehicles in the US in 2008-2010, designed to meet the tougher emissions requirements in 2010. Recently, in early 2008, Honda has stated that they plan to offer their 50 state compliant 2.2 liter i-DTEC diesel engine in the new 2009 Acura TSX for the US market.

In Canada, Smart Fortwo was first introduced in 2004 with a diesel engine, up until 2008.^[36]

In Japan, newly registered Diesel vehicles were less than 1% in 2005.^[37] Honda and Mercedes-Benz have made plans to offer Diesel vehicles in the future, with Mercedes-Benz having already started selling the Mercedes-Benz E320 CDI in autumn 2006.

European governments tend to favor diesel engines in taxation policy because of diesel's superior fuel efficiency.

In Europe, where tax rates in many countries make diesel fuel much cheaper than gasoline, diesel vehicles are very popular (over half the new cars sold are powered by diesel engines) and newer designs have significantly narrowed differences between petrol and diesel vehicles in the areas mentioned. Often, among comparably designated models, the turbodiesels outperform their naturally aspirated petrol-powered sister cars. One anecdote tells of Formula One driver Jenson Button, who was arrested while driving a diesel-powered BMW 330cd Coupé at 230 km/h (about 140 mph) in France, where he was too young to have a gasoline-engined car hired to him. Button dryly observed in subsequent interviews that he had actually done BMW a public relations service, as nobody had believed a diesel road car could be driven that fast. Yet, BMW had already won the 24 Hours Nürburgring overall in 1998 with a 3-series diesel. The BMW diesel lab in Steyr, Austria is led by Ferenc Anisits and develops innovative diesel engines.

Mercedes-Benz(eMB), offering diesel-powered passenger cars since 1936, has put the emphasis on high performance diesel cars in its newer ranges, as does Volkswagen with its brands. Citroën sells more cars with diesel engines than gasoline engines, as the French brands (also Peugeot) pioneered smoke-less HDI designs with filters. Even the Italian marque Alfa Romeo, known for design and successful history in racing, focuses on diesels that are also raced.

A few civilian motorcycles have been built using adapted stationary diesel engines, but the weight and cost disadvantages generally outweigh the efficiency gains in this application. NATO though, has a single vehicle fuel policy and because of its fuel efficiency and safety advantages on the battlefield, NATO has selected diesel as that fuel. NATO and the United States Marine Corps have been developing a diesel military motorcycle based on a Kawasaki off road motorcycle, with a purpose designed naturally aspirated direct injection diesel at Cranfield University in England, to be produced in the USA, because motorcycles are the last remaining petrol/gasoline powered vehicle in their inventory.

[edit] Engine speeds

Within the diesel engine industry, engines are often categorized by their rotational speeds into three unofficial groups:

High speed engines, medium speed engines and slow speed engines

High and medium speed engines are predominantly four stroke engines. Medium speed engines are physically larger than high speed engines and can burn lower grade (slower burning) fuel than high speed engines. Slow speed engines are predominantly large two stroke crosshead engines, hence very different from high and medium speed engines. Due to the lower rotational speed of slow and medium speed engines, there is more time for combustion during the power stroke of the cycle, and these engine are capable of utilising lower fuel grades (slower burning) fuels than high speed engines.

[edit] High-speed engines

High-speed (approximately 1000 rpm and greater) engines are used to power trucks (lorries), buses, tractors, cars, yachts, compressors, pumps and small electrical generators. As of 2008^[update] most high-speed engines have indirect injection, although many modern engines, particularly in on-highway applicatons, have common rail direct injection, which is not as reliable as mechanical injection, but is cleaner burning.

[edit] Medium-speed engines

Medium speed engines are used in large electrical generators, ship propulsion and mechanical drive applications such as large compressors or pumps.

Engines used in electrical generators run at approximately 300 to 1000 rpm and are optimized to run at a set synchronous speed depending on the generation frequency (50 or 60 Hertz) and provide a rapid response to load changes. Typical synchronous speeds for modern medium speed engines are 500/514 RPM (50/60 Hz), 600 RPM (both 50 and 60 Hz), 720/750 rpm, and 900/1000 rpm.

As of 2009^[update] the largest medium speed engines in current production have outputs up to approximately 20,000 kW (26,800 bhp). and are supplied by companies like MAN B&W, Wartsila,^[38] and Rolls-Royce (acquired Ulstein Bergen Diesel in 1999). Medium speed engines produced are four-stroke machines and two-stroke units.

Typical cylinder bore size for medium speed engines ranges from 20 cm to 50 cm, and engine configurations typically are offered ranging from in-line 4 cylinder units to Vee 20 cylinder units.

Most larger medium speed engines are started with compressed air direct on pistons, using an air distributor, as opposed to a pneumatic starting motor acting on the flywheel, which tends to be used for smaller engines. There is no definitive engine size cut-off point for this.

Medium speed diesel engines operate on either diesel fuel or heavy fuel oil by direct injection in the same manner noted below for low speed engines.

It should also be noted that most major manufacturers of medium speed engines make natural gas fueled versions of their diesel cycle engines, which in fact operate on the Otto cycle, and require spark ignition, typically provided with a spark plug.^[34]

There are also dual (diesel/natural gas/coal gas) fuel versions of medium and low speed diesel engines using a lean fuel air mixture and a small injection of diesel fuel (so called "pilot fuel") for ignition. In case of a gas supply failure or maximum power demand these engines will instantly switch back to full diesel fuel operation . ^{[34] [39] [40]}

[edit] Low-speed engines

Also known as "slow-speed" or traditionally "oil engines", the largest diesel engines are primarily used to power ships, although there are a few land-based power generation units as well. These extremely large two-stroke engines have power outputs up to approximately 85 MW, operate in the range from approximately 60 to 200 rpm and are up to 15.25m (50ft) tall, and can weigh over 2000 tons. They typically use direct injection running on cheap low-grade "heavy fuel", also known as "Bunker C" fuel, which requires heating in the ship for tanking and before injection due to the fuel's high viscosity. The heat for fuel heating is often provided by waste heat recovery boilers located in the exhaust ducting of the engine, which produce the steam required for fuel heating. Provided the heavy fuel system is kept warm and circulating, engines can be started and stopped on heavy fuel.

Large and medium marine engines are started with compressed air directly applied to the pistons. Air is applied to cylinders to start the engine forwards or backwards because they are normally directly connected to the propeller without clutch or gearbox, and to provide reverse propulsion the engine must be run backwards. At least three cylinders are required with two stroke engines and at least six cylinders with four stroke engines to provide torque every 120 degrees.

Companies such as MAN B&W Diesel, (formerly Burmeister & Wain) and Wärtsilä (which acquired Sulzer Diesel) design such large low speed engines. They are unusually narrow and tall due to the addition of a crosshead bearing. Today (2007), the 14 cylinder Wärtsilä-Sulzer 14RTFLEX96-C turbocharged two-stroke diesel engine built by Wärtsilä licensee Doosan in Korea is the most powerful diesel engine put into service, with a cylinder bore of 960 mm (37.8 in) delivering 84.42 MW (114,800 bhp). It was put into service in September 2006, aboard the world's largest container ship Emma Maersk which belongs to the A.P. Moller-Maersk Group. Typical bore size for low speed engines ranges from approximately 35 to 98 cm (14 to 39 in). As of 2008^[update], all produced low speed engines with crosshead bearings are in-line configurations; no Vee versions have been produced.

[edit] Supercharging and turbocharging

Most diesels are now turbocharged and some are both turbo charged and supercharged. Because diesels do not have fuel in the cylinder before combustion is initiated, more than one bar of air can be loaded in the cylinder without preignition. A turbocharged engine can produce significantly more power than a naturally aspirated engine of the same configuration, as having more air in the cylinders allows more fuel to be burned and thus more power to be produced. A supercharger is powered mechanically by the engine's crankshaft, while a turbocharger is powered by the engine exhaust, not requiring any mechanical power, hence turbocharging does not adversely affect the fuel economy. A two-stroke engine does not have an exhaust and intake stroke . These are performed when the piston is at the bottom of the cylinder . Therefore large two-stroke engines have a piston pump , or electrical driven turbo at startup. Smaller two stroke engines (example Detroit 71 series) are fitted with turbochargers and a mechanically driven supercharger (i.e. a Roots blower). Because turbocharged or supercharged engines produce more power for a given engine size as compared to naturally aspirated engines, attention must be paid to the mechanical design of components, lubrication, and cooling to handle the power.

[edit] Other applications

• Aircraft diesel engine
• Motorcycles

[edit] Current and future developments

As of 2008^[update], many common rail and unit injection systems already employ new injectors using stacked piezoelectric wafers in lieu of a solenoid, giving finer control of the injection event.^[41]

Variable geometry turbochargers have flexible vanes, which move and let more air into the engine depending on load. This technology increases both performance and fuel economy. Boost lag is reduced as turbo impeller inertia is compensated for.^[42]

Accelerometer pilot control (APC) uses an accelerometer to provide feedback on the engine's level of noise and vibration and thus instruct the ECU to inject the minimum amount of fuel that will produce quiet combustion and still provide the required power (especially while idling).^[43]

The next generation of common rail diesels is expected to use variable injection geometry, which allows the amount of fuel injected to be varied over a wider range, and variable valve timing similar to that on gasoline engines. Particularly in the United States, coming tougher emissions regulations present a considerable challenge to diesel engine manufacturers. Ford's HyTrans Project has developed a system which starts the ignition in 400 ms, saving a significant amount of fuel on city routes, and there are other methods to achieve even more efficient combustion, such as homogeneous charge compression ignition, being studied.^[44][45]

[edit] Maintenance hazards

Fuel injection introduces potential hazards in engine maintenance due to the high fuel pressures used. Residual pressure can remain in the fuel lines long after an injection-equipped engine has been shut down. This residual pressure must be relieved, and if it is done so by external bleed-off, the fuel must be safely contained. If a high-pressure diesel fuel injector is removed from its seat and operated in open air, there is a risk to the operator of injury by hypodermic jet-injection, even with only 100 psi pressure. ^[46]. The first known such injury occurred in 1937 during a diesel engine maintenance operation^[47].

[edit] See also

• Diesel car history

• Diesel cycle
• Forced induction
• Indirect injection
• Direct injection
• Turbocharger
• Dieselisation
• Diesel generator
• Hot bulb engine
• Gasoline direct injection
• Glow plug (model engine)
• Carbureted compression ignition model engines
• Elsbett—An improved multi-fuel diesel engine design
• Hybrid power source
• Junkers Jumo 205—The more successful of the first series of production diesel aircraft engines.
• Napier Deltic—a high-speed, lightweight diesel engine used in fast naval craft and some railway locomotives.
• Petrol engine, gasoline
• Reciprocating engine
• Six stroke engine—40% improved efficiency over 4 stroke by using wasted heat to generate steam.
• SVO—Straight Vegetable Oil—alternative fuel for diesel engines.
• Wärtsilä-Sulzer RTA96-C—world's most powerful, most efficient and largest diesel engine.
• WVO—Waste Vegetable Oil—filtered, alternative fuel for diesel engines.
• History of the internal combustion engine
• Hesselman engine

Wikimedia Commons has media related to: Rudolf Diesel

v • d • e Heat engines Stroke cycles One-stroke cycle · Two-stroke cycle · Four-stroke cycle · Six-stroke cycle Engine types Gas turbine · Piston · Jet · Rocket engine · Steam engine · Stirling engine · Tschudi · Split-single · Steam turbine · Rotary · Wankel · Free-piston · Britalus · Coomber · Swing-piston · Orbital · Quasiturbine Valves Cylinder head porting · Corliss · D slide · Manifold · Multi · Piston · Poppet · Sleeve Piston layouts Single cylinder · Straight · Opposed · Flat · V · W · H · Deltic · Radial · Rotary · Stelzer · Controlled Combustion · Bourke · Split cycle Motion mechanisms Cam · Connecting rod · Coomber rotary · Crank · Crank substitute · Crankshaft · Linkages (Evans · Peaucellier-Lipkin · Sector straight-line · Watt) · Scotch Yoke · Rhombic drive · Double acting/differential cylinder Thermodynamic cycle

[edit] References

[edit] Patents

• US Patent 845140 Combustion Engine, dated February 26 1907.
• US Patent 502837 Engine operated by the explosion of mixtures of gas or hydrocarbon vapor and air, dated August 8 1893.
• US Patent 439702 Petroleum Engine or Motor, dated November 4 1890.

[edit] External links

Wikimedia Commons has media related to: Diesel engines

• U.S. Patent 608,845 
• HowStuffWorks Article
• Marine Engine Digest
• Diesel Efficiency Article—Comparison of fuel efficiency between diesel and gas variants of same cars
• Pictures of an extremely large container ship engine
• Diesel Engine Fundamentals
• Opel 1.7 CDTI - romanian article (Romanian)
• NATEF Certified Diesel Mechanic Schools by State
• FactsAboutSCR.com, Selective Catalytic Reduction diesel emissions technology