Cogeneration

From Wikipedia, the free encyclopedia

Cogeneration (also combined heat and power, CHP) is the use of a heat engine or a power station to simultaneously generate both electricity and useful heat.

Conventional power plants emit the heat created as a by-product of electricity generation into the environment through cooling towers, flue gas, or by other means. CHP or a bottoming cycle captures the by-product heat for domestic or industrial heating purposes, either very close to the plant, or—especially in Scandinavia and eastern Europe—as hot water for district heating with temperatures ranging from approximately 80 to 130 °C. This is also called decentralized energy.^[1]

In the United States, Con Edison distributes 30 billion pounds of 350 °F/180 °C steam each year through its seven cogeneration plants to 100,000 buildings in Manhattan—the biggest steam district in the world. The peak delivery is 10 million pounds per hour (corresponding to approx. 2.5 GW)^[2][3] This steam distribution system is the reason for the steaming manholes often seen in "gritty" New York based movies.

By-product heat at moderate temperatures (212-356°F/100-180°C) can also be used in absorption chillers for cooling. A plant producing electricity, heat and cold is sometimes called trigeneration or more generally: polygeneration plant.

Cogeneration is a thermodynamically efficient use of fuel. In separate production of electricity some energy must be rejected as waste heat, but in cogeneration this thermal energy is put to good use.

[edit] Overview

Masnedø CHP power station in Denmark. This station burns straw as fuel. The adjacent greenhouses are heated by district heating from the plant.

Thermal power plants (including those that use fissile elements or burn coal, petroleum, or natural gas), and heat engines in general, do not convert all of their thermal energy into electricity. In most heat engines, a bit more than half is lost as excess heat (see: Second law of thermodynamics and Carnot's theorem). By capturing the excess heat, CHP uses heat that would be wasted in a conventional power plant, potentially reaching an efficiency of up to 89%, compared with 55%^[4] for the best conventional plants. This means that less fuel needs to be consumed to produce the same amount of useful energy.

Some tri-cycle plants have utilized a combined cycle in which several thermodynamic cycles produced electricity, and then a heating system was used as a condenser of the power plant's bottoming cycle. For example, the RU-25 MHD generator in Moscow heated a boiler for a conventional steam powerplant, whose condensate was then used for space heat. A more modern system might use a gas turbine powered by natural gas, whose exhaust powers a steam plant, whose condensate provides heat. Tri-cycle plants can have thermal efficiencies above 80%.

An exact match between the heat and electricity needs rarely exists. A CHP plant can either meet the need for heat (heat driven operation) or be run as a power plant with some use of its waste heat.

CHP is most efficient when the heat can be used on site or very close to it. Overall efficiency is reduced when the heat must be transported over longer distances. This requires heavily insulated pipes, which are expensive and inefficient; whereas electricity can be transmitted along a comparatively simple wire, and over much longer distances for the same energy loss.

A car engine becomes a CHP plant in winter, when the reject heat is useful for warming the interior of the vehicle. This example illustrates the point that deployment of CHP depends on heat uses in the vicinity of the heat engine.

Cogeneration plants are commonly found in district heating systems of big towns, hospitals, prisons, oil refineries, paper mills, wastewater treatment plants, thermal enhanced oil recovery wells and industrial plants with large heating needs.

Thermally enhanced oil recovery (TEOR) plants often produce a substantial amount of excess electricity. After generating electricity, these plants pump leftover steam into heavy oil wells so that the oil will flow more easily, increasing production. TEOR cogeneration plants in Kern County, California produce so much electricity that it cannot all be used locally and is transmitted to Los Angeles^{[citation needed]}.

CHP is one of the most cost efficient methods of reducing carbon emissions of heating in cold climates.^[5]

[edit] Types of plants

Topping cycle plants primarily produce electricity from a steam turbine. The exhausted steam is then condensed, and the low temperature heat released from this condensation is utilized for e.g. district heating.

Bottoming cycle plants produce high temperature heat for industrial processes, then a waste heat recovery boiler feeds an electrical plant. Bottoming cycle plants are only used when the industrial process requires very high temperatures, such as furnaces for glass and metal manufacturing, so they are less common.

Large cogeneration systems provide heating water and power for an industrial site or an entire town. Common CHP plant types are:

• Gas turbine CHP plants using the waste heat in the flue gas of gas turbines
• Gas engine CHP plants (in the US "gaseous fuelled") use a reciprocating gas engine which is generally more competitive than a gas turbine up to about 5 MW. Typical large example see ^[6]
• Combined cycle power plants adapted for CHP
• Steam turbine CHP plants that use the heating system as the steam condenser for the steam turbine.
• Molten-carbonate fuel cells have a hot exhaust, very suitable for heating.

Smaller cogeneration units may use a reciprocating engine or Stirling engine. The heat is removed from the exhaust and the radiator. These systems are popular in small sizes because small gas and diesel engines are less expensive than small gas- or oil-fired steam-electric plants.

Some cogeneration plants are fired by biomass ^[7], or industrial and municipal waste (see incineration).

[edit] MicroCHP

"Micro cogeneration" is a so called distributed energy resource (DER). The installation is usually less than 5 kWe in a house or small business[3]. Instead of burning fuel to merely heat space or water, some of the energy is converted to electricity in addition to heat. This electricity can be used within the home or business or, if permitted by the grid management, sold back into the electric power grid. This from of micro-generation is one of the most cost effective means of reducing carbon.^[8]

[edit] MiniCHP

"Mini cogeneration" is a so called distributed energy resource (DER). the installation is usually more than 5 kWe and less than 500 kWe in a building or medium sized business.

Current (2007) Micro- andMiniCHP installations use five different technologies: microturbines, internal combustion engines, stirling engines, closed cycle steam engines and fuel cells. One author indicates that microchp based on Stirling engines is the most cost effective of the so called microgeneration technologies in abating carbon emissions. ^[9]

[edit] History

[edit] Cogeneration in Europe

Europe has actively incorporated cogeneration into its energy policy. In September 2008 at a hearing of the European Parliament’s Urban Lodgment Intergroup, Energy Commissioner Andris Piebalgs is quoted as saying, “security of supply really starts with energy efficiency.” ^[10] Energy efficiency and cogeneration are recognized in the opening paragraphs of the European Union’s Cogeneration Directive 2004/08/EC. This directive intends to support cogeneration and establish a method for calculating cogeneration abilities per country. The development of cogeneration has been very uneven over the years and has been dominated throughout the last decades by national circumstances.

As a whole, the European Union currently generates 11% of its electricity using cogeneration, saving Europe an estimated 35Mtoe per annum a day.^[11] However, there is large difference between Member States with variations of the energy savings between 2% and 60%. Europe has the three countries with the world’s most intensive cogeneration economies: Denmark, the Netherlands and Finland.^[12]

Other European countries are also making great efforts to increase their efficiency. Germany reported that at present, over 50% of the country’s total electricity demand could be provided through cogeneration. So far Germany has set the target to double its electricity cogeneration from 12.5% of the country’s electricity to 25% of the country’s electricity by 2020 and has passed supporting legislation accordingly in “Federal Ministry of Economics and Technology, (BMWi), Germany, August 2007. The UK is also actively supporting combined heat and power. In light of UK’s goal to achieve a 60% reduction in carbon dioxide emissions by 2050, the government has set the target to source at least 15% of its government electricity use from CHP by 2010. ^[13] Other UK measures to encourage CHP growth are financial incentives, grant support, a greater regulatory framework, and government leadership and partnership.

According to the IEA 2008 modeling of cogeneration expansion for the G8 countries, expansion of cogeneration in France, Germany, Italy and the UK alone would effectively double the existing primary fuel savings by 2030. This would increase Europe’s savings from today’s155.69 Twh to 465 Twh in 2030. It would also result in a 16% to 29% increase in each country’s total cogenerated electricity by 2030.

Governments are being assisted in their CHP endeavors by organizations like COGEN Europe who serve as an information hub for the most recent updates within Europe’s energy policy. COGEN is Europe’s umbrella organization representing the interests of the cogeneration industry, users of the technology and promoting its benefits in the EU and the wider Europe. The association is backed by the key players in the industry including gas and electricity companies, ESCOs, equipment suppliers, consultancies, national promotion organisations, financial and other service companies.

[edit] Cogeneration in the United States

Perhaps the first modern use of energy recycling was done by Thomas Edison. His 1882 Pearl Street Station, the world’s first commercial power plant, was a combined heat and power plant, producing both electricity and thermal energy while using waste heat to warm neighboring buildings.^[14] Recycling allowed Edison’s plant to achieve approximately 50 percent efficiency.

By the early 1900s, regulations emerged to promote rural electrification through the construction of centralized plants managed by regional utilities. These regulations not only promoted electrification throughout the countryside, but they also discouraged decentralized power generation, such as cogeneration. They even went so far as to make it illegal for non-utilities to sell power.^[15]

By 1978, Congress recognized that efficiency at central power plants had stagnated and sought to encourage improved efficiency with the Public Utility Regulatory Policies Act (PURPA), which encouraged utilities to buy power from other energy producers.

[edit] Percentage of US energy produced by cogeneration

Cogeneration plants proliferated, soon producing about 8 percent of all energy in the U.S.^[16] However, the bill left implementation and enforcement up to individual states, resulting in little or nothing being done in many parts of the country.

In 2008 Tom Casten, chairman of the company Recycled Energy Development, said that "We think we could make about 19 to 20 percent of U.S. electricity with heat that is currently thrown away by industry."^[17]

Outside the U.S., energy recycling is more common. Denmark is probably the most active energy recycler, obtaining about 55% of its energy from cogeneration and waste heat recovery. Other large countries, including Germany, Russia, and India, also obtain a much higher share of their energy from decentralized sources.^[16][17]

[edit] See also

Energy portal

• Biogas Powerplant
• Decentralized energy (more general term that encompasses CHP)
• Distributed Generation (more general term that encompasses CHP)
• Geothermal power in Iceland
• New York City steam system
• Proposed oil phase-out in Sweden
• Trigeneration (using waste heat for cooling during the summer)
• District heating
• Organic Rankine Cycle

[edit] References

[edit] External links

• Information and Publications about Cogeneration on reegle
• Energy Policy Act of 2005 - sec. 1817 "Study of Cogeneration"
• CHP in the United States:
  • Southeast CHP Application Center.
• CHP in Finland:
  • High cogeneration performance by innovative steam turbine for biomass-fired CHP plant in Iisalmi, Finland.
• CHP in Belgium :
  • Experimental study and modeling of a low temperature Rankine Cycle for small scale cogeneration
• CHP in the UK :
  • CHP at DEFRA. UK Department for Environment, Food and Rural Affairs.
  • CHP Focus - DECC's free resource for helping to develop combined heat and power
  • BBC News: Power from the people
  • M.I.T. algae reactor
• Associations:
  • U.S. Combined Heat and Power Association
  • COGEN Europe The European Association for the Promotion of Cogeneration
  • The World Alliance for Decentralized Energy