List of ISO standards

From Wikipedia, the free encyclopedia

Jump to: navigation, search

This is a list of ISO standards that are discussed in Wikipedia articles. For a list of all the more than 16,000 ISO standards (as of 2007), see the ISO Catalogue.

About 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely/publicly available.[1]

Contents

[edit] ISO 1–ISO 999

  • ISO 1 Standard reference temperature for geometrical product specification and verification
  • ISO 2 Textiles -- Designation of the direction of twist in yarns and related products
  • ISO 3 Preferred numbers
  • ISO 4 Rules for the abbreviation of title words and titles of publications
  • ISO 7 Pipe threads where pressure-tight joints are made on the threads
  • ISO 9 Information and documentation — Transliteration of Cyrillic characters into Roman characters — Slavic and non-Slavic languages
  • ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch)
  • ISO 31 Quantities and units
  • ISO 65 Certification bodies operating a product certification system
  • ISO 68-1 Basic profile of metric screw threads
  • ISO 128 Technical drawings -- General principles of presentation
  • ISO 216 paper sizes, e.g. the A4 paper size
  • ISO 226 Phon based on Fletcher-Munson curves
  • ISO 228-1: Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation.
  • ISO 233:1984 Transliteration of Arabic characters into Roman characters
    • ISO 233-2:1993 Transliteration of Arabic characters into Roman characters — Part 2: Arabic language — Simplified transliteration
  • ISO 259:1984 Documentation — Transliteration of Hebrew characters into Roman characters
    • ISO 259-2:1994 Transliteration of Hebrew characters into Roman characters — Part 2: Simplified transliteration
  • ISO 262 Selected metric-screw-thread sizes for screws, bolts, and nuts
  • ISO 500 Agricultural tractors — Rear-mounted power take-off
  • ISO 639 Codes for the representation of names of languages
    • ISO 639-1 Codes for the representation of names of languages — Part 1: Alpha-2 code
    • ISO 639-2 Codes for the representation of names of languages — Part 2: Alpha-3 code
    • ISO 639-3 Codes for the representation of names of languages — Part 3: Alpha-3 code for comprehensive coverage of languages
    • ISO 639-5
  • ISO/IEC 646 internationalized 7 bit ASCII variants
  • ISO 657 Hot-rolled steel sections
  • ISO 668 Specification for Shipping Containers
  • ISO 690 bibliographic references
  • ISO 732 Photography — 120-size and 220-size films — Dimensions
  • ISO 764 Horology -- Magnetic resistant watches
  • ISO 838 Standard for punching filing holes into paper
  • ISO 843:1997 Conversion of Greek characters into Roman characters
  • ISO 999 Guidelines for the content, organization, and presentation of indexes

[edit] ISO 1000–ISO 9999

  • ISO 1000 SI units and recommendations for the use of their multiples and of certain other units
  • ISO 1004 Magnetic ink character recognition
  • ISO 1007 135 film format
  • ISO/IEC 1539 Fortran programming language
  • ISO 1629 Establishes a system of terms and nomenclature for polymers
  • ISO 1745 Information processing – Basic mode control procedures for data communication systems
  • ISO/IEC 2022 Information technology: Character code structure and extension techniques
  • ISO 2108 International standard book numbering (ISBN)
  • ISO 2145 Numbering of divisions and subdivisions in written documents
  • ISO 2171 Cereals and milled cereal products — Determination of total ash
  • ISO 2281 Water-resistant watches
  • ISO 2533 Standard Atmosphere
  • ISO 2709 Format for information exchange (e.g. MARC)
  • ISO 3029 126 film format
  • ISO 3082 Iron ores — Sampling and sample preparation procedures
  • ISO 3103 Method of brewing tea for the purpose of sensory tests
  • ISO 3166 codes for countries and subdivisions
  • ISO 3297 International standard serial number (ISSN)
  • ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners.
  • ISO 3536 Road vehicles -- Safety glazing materials -- Vocabulary
  • ISO 3537 Road vehicles -- Safety glazing materials -- Mechanical tests
  • ISO 3538 Road vehicles -- Safety glazing materials -- Method for the determination of solar transmittance
  • ISO 3601 Fluid power systems -- O-rings
    • ISO 3601-1 Inside diameters, cross-sections, tolerances and size identification code (Recently updated)
    • ISO 3601-2 Housing dimensions for general applications (Recently updated)
    • ISO 3601-4 Anti-extrusion rings (back-up rings) (Recently updated)
  • ISO 3602 Romanization of Japanese
  • ISO 3632 Quality of Saffron
  • ISO 3635:1981 Size designation of clothes — Definitions and body measurement procedure
  • ISO 3864 Safety labels
  • ISO 3901 International Standard Recording Code (ISRC)
  • ISO 3977 Design and procurement standards for gas turbine system applications
  • ISO 4157 Subdivision of construction works
    • ISO 4157-1: buildings and part of buildings
    • ISO 4157-2: room numbers
    • ISO 4157-3: room identifiers
  • ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines -- Cement mortar lining
  • ISO 4217 Currency codes
  • ISO 4628 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance
    • ISO 4628-1 : General introduction and designation system
    • ISO 4628-3 : Assessment of degree of rusting
  • ISO/IEC 4873:1991 8-bit code for information interchange
  • ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
    • ISO 5167-1 Part 1: General principles and requirements
    • ISO 5167-2 Part 2: Orifice plates
    • ISO 5167-3 Part 3: Nozzles and Venturi nozzles
    • ISO 5167-4 Part 4: Venturi tubes
  • ISO 5218 Representation of human sexes
  • ISO 5455 Technical drawings: scales
  • ISO 5775 Bicycle tyres and rims
  • ISO 5800 Photographic Film speed
  • ISO 5964 Guidelines for the Establishment and Development of Multilingual Thesauri
  • ISO 5971:1981 Size designation of clothes — Pantyhose
  • ISO 6166 structure of an International Securities Identifying Number (ISIN)
  • ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
    • ISO 6194-5 Identification of visual imperfections
  • ISO 6344 Coated abrasives — Grain size analysis
    • ISO 6344-1 Part 1: Grain size distribution test
    • ISO 6344-2 Part 2: Determination of grain size distribution of macrogrits P12 to P220
    • ISO 6344-3 Part 3: Determination of grain size distribution of microgrits P240 to P2500
  • ISO 6429 Information technology: Control functions for coded character sets
  • ISO 6438 Documentation — African coded character set for bibliographic information interchange
  • ISO 6594 Cast iron drainage pipes and fittings -- Spigot series
  • ISO 6709 Standard representation of latitude, longitude and altitude for geographic point locations
  • ISO 6946 Building components and building elements — Thermal resistance and thermal transmittance — Calculation method
  • ISO 7001 Public Information Symbols
  • ISO 7002 Agricultural food products — Layout for a standard method of sampling from a lot
  • ISO 7098 Romanization of Chinese
  • ISO 7372 Trade data interchange
  • ISO/IEC 7501-1:1997 Identification cards — Machine readable travel documents (Part 1: Machine readable passport; Part 2: Machine readable visa; Part 3: Machine readable official travel documents)
  • ISO 7736 Car radio installation space
  • ISO/IEC 7810 Identification cards — Physical characteristics
  • ISO/IEC 7811 Identification cards — Recording technique
  • ISO/IEC 7812 Identification cards -- Identification of issuers
  • ISO/IEC 7813 Information technology -- Identification cards -- Financial transaction cards
  • ISO/IEC 7816 Identification cards -- Integrated circuit cards
  • ISO/IEC 7942 Graphical Kernel System
  • ISO 8090 Cycles — Terminology
  • ISO 8180 Ductile iron pipelines — Polyethylene sleeving for site application
  • ISO 8373 Manipulating Industrial Robots — Vocabulary
  • ISO 8402 Quality Management and Quality Assurance - Vocabulary
  • ISO 8501-1 Preparation of steel substrates before application of paints and related products
  • ISO 8555 Environmental management systems.
  • ISO 8559:1989 Garment construction and anthropometric surveys — Body dimensions
  • ISO 8583 Financial transaction card originated messages — Interchange message specifications
    • ISO 8583-1 Part 1: Messages, data elements and code values
    • ISO 8583-2 Part 2: Application and registration procedures for Institution Identification Codes (IIC)
    • ISO 8583-3 Part 3: Maintenance procedures for messages, data elements and code values
  • ISO 8601 Date and time representation
  • ISO/IEC 8613 Open Document Architecture
  • ISO/IEC 8632 Computer Graphics Metafile
  • ISO 8651 Graphical Kernel System language bindings
  • ISO/IEC 8652: Information technology — Programming languages — Ada
  • ISO 8805 Graphical Kernel System for Three Dimensions and the C language bindings are ISO 8806.
  • ISO 8806-4 Graphical Kernel System for Three Dimensions, C language bindings
  • ISO 8807: Language Of Temporal Ordering Specification (LOTOS)
  • ISO/IEC 8824 Abstract Syntax Notation One (ASN.1)
  • ISO/IEC 8825 ASN.1 Encoding Rules
  • ISO 8859 8-bit coded character sets
  • ISO 8879 Standard Generalized Markup Language (SGML)
  • ISO 9000 Quality management system in production environments
  • ISO 9001 Quality management
  • ISO 9069 SGML support facilities — SGML Document Interchange Format (SDIF)
  • ISO/IEC 9075 SQL
  • ISO 9126 Software quality model
  • ISO 9141 Network interconnection of computers in a vehicle
    • ISO 9141-2 OBD-II standard, aka 9141 CARB standard
  • ISO 9241 Ergonomic requirements for office work with visual display terminals
  • ISO 9362 Bank Identifier Code or BIC system
  • ISO 9407 Shoe sizes
  • ISO/IEC 9541 Information technology — Font information interchange
    • ISO/IEC 9541-1:1991 Information technology — Font information interchange — Part 1: Architecture
    • ISO/IEC 9541-2:1991 Information technology — Font information interchange — Part 2: Interchange Format
    • ISO/IEC 9541-3:1994 Information technology — Font information interchange — Part 3: Glyph shape representation
  • ISO 9564 Banking — Personal Identification Number (PIN) management and security (in ATM and POS systems)
  • ISO/IEC 9579 Remote database access for SQL
  • ISO 9592, ISO 9593 PHIGS (Programmer's Hierarchical Interactive Graphics System)
  • ISO 9660 CD-ROM file system
  • ISO/IEC 9796 Information technology — Security techniques — Digital signature schemes giving message recovery
  • ISO/IEC 9797 Information technology — Security techniques — Message Authentication Codes (MACs)
  • ISO/IEC 9798 Information technology — Security techniques — Entity authentication
  • ISO 9869 Thermal insulation — Building elements — In-situ measurements of thermal resistance and thermal transmittance
  • ISO 9899 C programming language
  • ISO/IEC 9945 Portable Operating System Interface (POSIX)
  • ISO 9984 Conversion of Georgian characters into Roman characters
  • ISO 9985 Conversion of Armenian characters into Roman characters
  • ISO 9992:1999 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
  • ISO 9999 Technical aids for persons with disabilities. Classification and terminology

[edit] ISO 10000–ISO 19999

  • ISO 10006 Quality management — Guidelines to quality in project management
  • ISO 10007 Quality management — Guidelines for configuration management
  • ISO 10012 Measurement management systems — Requirements for measurement processes and measuring equipment
  • ISO/IEC 10021 Message Oriented Text Interchange Systems (MOTIS)
  • ISO/IEC 10026 Open Systems Interconnection
  • ISO 10077 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance
  • ISO/IEC 10089 Information technology; 130 mm rewritable optical disk cartridge for information interchange — 650 MB per cartridge
  • ISO 10160 Interlibrary Loan Application Service Definition — defines terminology used in interlibrary loan
  • ISO 10161 Interlibrary Loan Application Protocol
  • ISO/IEC 10179:1996 Document Style Semantics and Specification Language (DSSSL)
  • ISO 10202:1991 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
  • ISO 10206 Extended Pascal (programming language)
  • ISO 10211 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
  • ISO 10279 BASIC programming language
  • ISO 10303 Industrial automation systems and integration — Product data representation and exchange. Known as STEP, STandard for the Exchange of Product data
  • ISO 10383 Securities and related financial instruments — Codes for exchanges and market identification (MIC)
  • ISO 10487 Connections for passenger car stereos
  • ISO 10628 Flow diagrams for process plants
  • ISO 10646 Universal Character Set (equivalent to Unicode's character set)
  • ISO 10664 Hexalobular internal driving feature for bolts and screws — Torx screw head
  • ISO 10957 Information and documentation — International Standard Music Number (ISMN)
  • ISO 10962 Securities and related financial instruments — Classification of Financial Instruments (CFI code)
  • ISO 10993 Biological Evaluation of medical devices
    • ISO 10993-1:2008 Evaluation and testing within a risk management system
    • ISO 10993-2: Animal welfare requirements.
    • ISO 10993-3: tests for genotoxicity, carcinogenicity and reproductive toxicity.
    • ISO 10993-4: Selection of tests for interactions with blood.
    • ISO 10993-5: Test for in vitro cytotoxicity
    • ISO 10993-6:2007 Tests for local effects after implantation.
    • ISO 10993-7:2008 Ethylene oxide sterilization residuals
    • ISO 10993-8:
    • ISO 10993-9:2007 Framework for identification and quantification of potential degradation products.
    • ISO 10993-10: Tests for irritation and sensitisation
    • ISO 10993-11: Tests for irritation systemic toxicity
    • ISO 10993-12:2007 Sample preparation and reference materials.
    • ISO 10993-13: Identification and Quantification of degradation products from polymeric medical devices.
    • ISO 10993-14: Identification and Quantification of degradation products from ceramics.
    • ISO 10993-15: Identification and quantification of degradation products from un-coated or coated metals and alloys.
    • ISO 10993-16: Toxicokinetic study design for degradation products and leachables.
    • ISO 10993-17: Methods for the establishment of allowable limits for leachable substances using health - based risk assessment.
    • ISO 10993-18: Chemical characterisation of materials.
    • ISO 10993-19: Physico-chemical, morphological and topographical characterization of materials
    • ISO 10993-20:2006 Principles and methods for immunotoxicology testing of medical devices
  • ISO 11064 Ergonomic Design of Control Centres
    • ISO 11062-1:2000 Part 1: Principles for the design of control centres
    • ISO 11062-2:2000 Part 2: Principles for the arrangement of control suites
    • ISO 11062-3:1999 Part 3: Control room layout ISO 11064-3:1999/Cor 1:2002
    • ISO 11062-3:2004 Part 4: Layout and dimensions of workstations
    • ISO 11062-3:2005 Part 6: Environmental requirements for control centres
  • ISO/IEC 11172 MPEG-1
  • ISO 11170:2003 Hydraulic fluid power — Filter elements — Sequence of tests for verifying performance characteristics
  • ISO/IEC 11179 Information Technology — Metadata Registries (MDR)
    • ISO/IEC 11179-1:2004 Part 1: Framework
    • ISO/IEC 11179-2:2005 Part 2: Classification
    • ISO/IEC 11179-3:2003 Part 3: Registry metamodel and basic attributes
    • ISO/IEC 11179-4:2004 Part 4: Formulation of data definitions
    • ISO/IEC 11179-5:2005 Part 5: Naming and identification principles
    • ISO/IEC 11179-6:2005 Part 6: Registration
  • ISO 11180 Postal addressing
  • ISO/IEC 11404:1996 Language-independent datatypes (See also General purpose datatypes)
  • ISO 11446:2004 Connectors for the electrical connection of towing and towed vehicles -- 13-pole connectors for vehicles with 12 V nominal supply voltage
  • ISO 11469:2000 Plastics -- Generic identification and marking of plastics products
  • ISO 11521 Replaced by ISO 15022
  • ISO/IEC 11578:1996 Information technology — Open Systems Interconnection — Remote procedure call (RPC)
  • ISO 11783 aka. IsoBus — J1939-based communication protocol for the agriculture industry.
  • ISO/IEC 11801 Information technology — Generic cabling for customer premises
  • ISO 11898 Road vehicles — Controller area network (CAN)
  • ISO 12006 Building construction. Organization of information about construction works.
  • ISO 13239 High-level data link control (HDLC) procedures
  • ISO/IEC 13249 SQL multimedia and application packages
  • ISO/IEC 13250 Topic map
  • ISO 13346 Volume and file structure of write-once and rewritable media, which UDF is based on.
  • ISO 13370 Thermal performance of buildings — Heat transfer via the ground — Calculation methods
  • ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
    • ISO 13406-1:1999 Part 1: Introduction
    • ISO 13406-2:1002 Part 2: Ergonomic requirements for flat panel displays
  • ISO 13407:1999 Human-centred design processes for interactive systems
  • ISO 13450 110 film format
  • ISO 13485:2003 Medical Devices - Quality management systems - Requirements for regulatory purposes.
  • ISO 13490 Information technology: Volume and file structure of read-only and write-once compact disk media for information interchange
  • ISO 13567/1 to 3 Technical product documentation; Organization and naming of layers for Computer-aided design (CAD)
  • ISO/IEC 13568:2002 Information Technology — Z Formal Specification Notation — Syntax, Type System and Semantics
  • ISO 13616 Bank Account Numbers (IBAN)
  • ISO 13849-1 Safety of machinery, Safety related parts of control systems, General principles for design
  • ISO/IEC 13818 MPEG-2
  • ISO 13837 Road vehicles -- Safety glazing materials -- Method for the determination of solar transmittance
  • ISO 14000 Environmental Management Standards in production environments
  • ISO 14001 Environmental Management
  • ISO 14064 Greenhouse Gases
  • ISO 14230 Road vehicles — Diagnostic systems — Keyword Protocol 2000
    • ISO 14230-1 Physical layer
    • ISO 14230-2 Data link layer
    • ISO 14230-3 Application layer
    • ISO 14230-4 Requirements for emission-related systems
  • ISO/IEC 14443 Identification cards — Contactless integrated circuit(s) cards — Proximity cards
  • ISO/IEC 14496 MPEG-4
  • ISO 14644 Standards Cleanrooms and associated controlled environments
  • ISO 14651 Information technology: International string ordering and comparison
  • ISO 14698 Standards
    • ISO-14698-1 Bio-contamination Control — General Principles
    • ISO-14698-2 Evaluation & Interpretation of Bio-contamination Data
  • ISO 14750 Information technology — Open Distributed Processing — Interface Definition Language
  • ISO/IEC 14755 Input methods to enter unicode characters from ISO/IEC 10646
  • ISO 14855-1:2005 Aerobic Biodegradation under controlled composting conditions
  • ISO 14855-2:2007 Aerobic Biodegradation under controlled composting conditions with gravimetric measurement of carbon dioxid
  • ISO/IEC 14882 Programming Languages — C++
  • ISO 14915 Software ergonomics for multimedia user interfaces
    • ISO 14915-1:2002 Part 1: Design principles and framework
    • ISO 14915-2:2003 Part 2: Multimedia navigation and control
    • ISO 14915-3:2002 Part 3: Media selection and combination
  • ISO 14971:2007 Medical Devices — Application Of Risk Management To Medical Devices
  • ISO/IEC 14977 Extended Backus-Naur Form (EBNF)
  • ISO 15000 Electronic business eXtensible Markup Language ebXML
    • ISO 15000-1:2004 Part 1: Collaboration-protocol profile and agreement specification (ebCPP)
    • ISO 15000-2:2004 Part 2: Message service specification (ebMS)
    • ISO 15000-3:2004 Part 3: Registry information model specification (ebRIM)
    • ISO 15000-4:2004 Part 4: Registry services specification (ebRS)
    • ISO 15000-5:2005 Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)
  • ISO 15022 Securities: Scheme for messages(Data Field Dictionary)
  • ISO 15082 Road vehicles -- Tests for rigid plastic safety glazing materials
  • ISO 15099 Thermal performance of windows, doors and shading devices — Detailed calculations
  • ISO 15112 Natural gas -- Energy determination
  • ISO 15189 Medical laboratories — Particular requirements for quality and competence
  • ISO 15288 Systems engineering — System life cycle processes
  • ISO 15289 Systems and software engineering — Content of systems and software life cycle process information products (Documentation)
  • ISO/IEC 15291: Information technology — Programming languages — Ada Semantic Interface Specification (ASIS)
  • ISO 15403 Natural gas -- Natural gas for use as a compressed fuel for vehicles
    • ISO 15403-1 Designation of the quality
  • ISO/IEC 15408 Common Criteria — Evaluation Criteria for Information Technology Security
  • ISO/IEC 15434 2D Data Matrix barcode
  • ISO/IEC 15444 JPEG 2000
  • ISO/IEC 15445:2000 ISO HTML, a subset of Hypertext Markup Language (HTML) 4
  • ISO/IEC 15504 Framework for the assessment of software processes, also known as SPICE (Software Process Improvement and Capability Determination).
  • ISO 15614-13:2002 Specification and qualification of welding procedures for metallic materials-Welding procedure test
  • ISO 15686 Service life planning for constructive works in 10 parts
  • ISO 15693 Transponders
  • ISO 15706 International Standard Audiovisual Number
  • ISO 15707 International Standard Musical Work Code
  • ISO 15836 The Dublin Core metadata element set
  • ISO 15897 Standard for the registration of new POSIX locales and POSIX charmaps
  • ISO 15924 Codes for the representation of names of scripts
  • ISO 15930 Portable Document Format (PDF)
  • ISO/IEC 15948:2003 Portable Network Graphics (PNG)
  • ISO 15970 Natural gas -- Measurement of properties -- Volumetric properties: density, pressure, temperature and compression factor
  • ISO 15971 Natural gas. Measurement of properties. Calorific value and Wobbe index
  • ISO/IEC 16500 Generic Digital Audio-Visual Systems DAVIC
  • ISO 16071:2003 Ergonomics of human-system interaction, Guidance on accessibility for human-computer interfaces
  • ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
  • ISO 16232 Road vehicles -- Cleanliness of components of fluid circuits
    • ISO 16232-8 Particle nature determination by microscopic analysis
    • ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
    • ISO 16232-10 Expression of results
  • ISO/IEC 16262 ECMAScript
  • ISO 16549 Textiles -- Unevenness of textile strands -- Capacitance method
  • ISO 16750 Road vehicles — Environmental conditions and testing for electrical and electronics equipment.
  • ISO/TS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
  • ISO 16982:2002 Ergonomics of human-system interaction, Usability methods supporting human-centred design
  • ISO/IEC 17024:2003 specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel
  • ISO/IEC 17025:2005 General requirements for competence of test and calibration laboratories
  • ISO 17202 Textiles -- Determination of twist in single spun yarns -- Untwist/retwist method
  • ISO 17776 : Petroleum industries
  • ISO/IEC 17799 Information technology: Code of practice for information security management
  • ISO/IEC 17894 Ships and marine technology — Computer applications — General principles for development and use of PES in marine applications
  • ISO 18000-7 Wireless standard for active RFID (Radio Frequency Identification)
  • ISO/IEC 18004: QR Code Standardization
  • ISO/IEC 18009: Information technology — Programming languages — Ada: Conformity assessment of a language processor (ACATS)
  • ISO/IEC 18023:2006(E) Information technology - SEDRIS -
  • ISO/IEC 18024-4:2006(E) Information technology - SEDRIS language bindings - Part 4: C
  • ISO/IEC 18025:2005(E) Information technology - Environmental Data Coding Specification (EDCS)
  • ISO/IEC 18026:2006(E) Information technology - Spatial Reference Model (SRM)
  • ISO/IEC 18033 Information technology — Security techniques — Encryption algorithms
    • Part 1: General
    • Part 2: Asymmetric ciphers
    • Part 3: Block ciphers
    • Part 4: Stream ciphers
  • ISO/IEC 18041-4:2005(E) Information technology - EDCS language bindings - Part 4: C
  • ISO/IEC 18042-4:2006(E) Information technology - Spatial Reference Model (SRM) language bindings - Part 4: C
  • ISO 18152:2003 Ergonomics of human-system interaction, Specification for the process assessment of human-system issues
  • ISO 18185: Wireless standard for electronic seals using active RFID (Radio Frequency Identification)
  • ISO 18245 standard concerning the assignment of Merchant Category Codes (MCC) in retail financial services
  • ISO 18529:2000 Ergonomics of human-system interaction, Human-centred lifecycle process descriptions (available in English only)
  • ISO 18629 standardized Process Specification Language (PSL).
  • ISO 19005 PDF
  • ISO 19011 standard providing guidelines for quality and environmental management systems auditing
  • ISO 19092-1 Financial Services — Security — Part 1: Security framework
  • ISO 19092-2 Financial Services — Security — Part 2: Message syntax and cryptographic requirements
  • ISO 19101 Geographic Information: Reference model
  • ISO 19105 Geographic Information: Conformance and testing
  • ISO 19107 Geographic Information: Spatial schema
  • ISO 19108 Geographic Information: Temporal schema
  • ISO 19109 Geographic Information: Rules for Application Schema
  • ISO 19110 Geographic Information: Feature cataloguing methodology
  • ISO 19111 Geographic Information: Spatial referencing by coordinates
  • ISO 19111 Geographic Information: Spatial referencing by identifier
  • ISO 19113 Geographic Information: Quality principles
  • ISO 19114 Geographic Information: Quality evaluation procedures
  • ISO 19115 Geographic Information: Metadata
  • ISO 19123 Geographic Information: Coverage schema
  • ISO 19128 Geographic Information: Web Map Service
  • ISO 19131 Geographic Information: Data product specification
  • ISO 19136 Geographic Information: Geography Markup Language
  • ISO/IEC 19501 Unified Modeling Language (UML)
  • ISO/IEC 19502 Meta-Object Facility (MOF)
  • ISO/IEC 19503 XML Metadata Interchange (XMI)
  • ISO/IEC 19757 Document Schema Definition Languages (DSDL)
  • ISO/IEC 19770 Information technology — Software asset management
  • ISO/IEC 19790 Security requirements for cryptographic modules (see also FIPS 140)
  • ISO/IEC 19794 Information technology - Biometric data interchange formats

[edit] ISO 20000–ISO 29999

  • ISO/IEC 20000:2005 IT Service Management System (based on BS15000)
  • ISO 20022 Financial Services — universal financial industry message scheme
  • ISO/IEC TR 20943 Information technology — Procedures for achieving metadata registry content consistency
    • ISO/IEC TR 20943-1:2003 Part 1: Data elements
    • ISO/IEC TR 20943-3:2004 Part 3: Value domains
  • ISO 22000 Food safety management systems — Requirements for any organization in the food chain
  • ISO/TS 22003 Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems
  • ISO 22241 : Diesel engines -- NOx reduction agent AUS 32
    • ISO 22241-1 : Quality requirements
    • ISO 22241-2 : Test methods
    • ISO 22241-3 : Handling, transportation and storing
  • ISO/IEC TR 22250 Regular Language description for XML — (RELAX)
    • ISO/IEC TR 22250-1:2002 RELAX Core
  • ISO/PAS 22399:2007 Social security - Guideline for incident preparedness and operational continuity management
  • ISO 22716:2007: Cosmetics.
  • ISO/IEC 23270:2003 C# Programming Language
  • ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1 (in publication as of 2005-12)
    • ISO/IEC 23360-1 — Part 1: Generic specification
    • ISO/IEC 23360-2 — Part 2: Specification for IA32 architecture
    • ISO/IEC 23360-3 — Part 3: Specification for IA64 architecture
    • ISO/IEC 23360-4 — Part 4: Specification for AMD64 architecture
    • ISO/IEC 23360-5 — Part 5: Specification for PPC32 architecture
    • ISO/IEC 23360-6 — Part 6: Specification for PPC64 architecture
    • ISO/IEC 23360-7 — Part 7: Specification for S390 architecture
    • ISO/IEC 23360-8 — Part 8: Specification for S390X architecture
  • ISO 23733 Textiles -- Chenille yarns -- Test method for the determination of linear density
  • ISO 23950 Library standard ANSI/NISO Z39.50 — Protocol for searching and retrieving information, usually from bibliographic records
  • ISO/IEC 24727 Identification Cards — Integrated Circuit Card Programming Interfaces
    • ISO/IEC 24727-1 — Part 1: Architecture
    • ISO/IEC 24727-2 — Part 2: Generic card interface
    • ISO/IEC 24727-3 — Part 3: Application interface
    • ISO/IEC 24727-4 — Part 4: API Administration
    • ISO/IEC CD 24727-5 — Part 5: Testing
    • ISO/IEC FCD 24727-6 — Part 6: Registration authority procedures for the authentication protocols for interoperability
  • ISO/IEC 24744:2007 Software Engineering — Metamodel for Development Methodologies
  • ISO/IEC 24762:2008 Information technology — Security techniques — Guidelines for information

and communications technology disaster recovery services

  • ISO/IEC DIS 25961 Recommended Practice for Architectural Description of Software-Intensive Systems. See IEEE 1471
  • ISO26000 Guideline about Social Responsibility also called ISO SR
  • ISO/IEC 26300 OpenDocument Format (.odf)
  • ISO/IEC 27000 Information Security Management System Family of Standards
    • ISO/IEC 27001 Information technology — Security techniques — Information security management systems — Requirements
    • ISO/IEC 27002 Information technology - Security techniques - Code of practice for information security management
  • ISO/IEC 29119 Software Testing [2]
    • ISO/IEC 29119-1 — Part 1: Concepts & Vocabulary
    • ISO/IEC 29119-2 — Part 2: Test Process
    • ISO/IEC 29119-3 — Part 3: Test Documentation
    • ISO/IEC 29119-4 — Part 4: Test Techniques
  • ISO/IEC 29300 OpenDocument
  • ISO/IEC 29500 Office Open XML

[edit] ISO 30000–ISO 39999

[edit] ISO 80000

[edit] See also

[edit] References

  1. ^ Freely Available Standards
  2. ^ ISO 29119 Software Testing standard

[edit] External links

Retrieved from "http://en.wikipedia.org/wiki/List_of_ISO_standards"
Personal tools