Van de Graaff generator

From Wikipedia, the free encyclopedia

Jump to: navigation, search
Van de Graaff generator

Van de Graaff generator.
Uses Accelerating electrons to sterilize food and process materials, accelerating protons for nuclear physics experiments, driving X-Ray tubes, etc.
Inventor Robert J. Van de Graaff
Related items Van de Graaff, linear particle accelerator

A Van de Graaff generator is an electrostatic machine which uses a moving belt to accumulate very high electrostatically stable voltages on a hollow metal globe. The potential differences achieved in modern Van de Graaff generators can reach 5 megavolts. The Van de Graaff generator can be thought of as a constant-current source connected in parallel with a capacitor and a very large electrical resistance.

Contents

[edit] Description

Schematic view of a classical Van de Graaff generator.
1) hollow metal sphere
2) upper electrode
3) upper roller (metal)
4) side of the belt with positive charges
5) opposite side of the belt with negative charges
6) lower roller (for example in acrylic glass)
7) lower electrode (ground)
8) spherical device with negative charges, used to discharge the main sphere
9) spark produced by the difference of potentials

A simple Van de Graaff generator consists of a belt of silk, or a similar flexible dielectric material, running over two pulleys, one of which is surrounded by a hollow metal sphere.[1] Two electrodes, (2) and (7), in the form of comb-shaped rows of sharp metal points, are positioned respectively near to the bottom of the pulley and inside the sphere. (2) is connected to the sphere, and a high DC potential (with respect to earth) is applied to (7); a positive potential in this example.

As the belt is pulled away from the upper roller, it pulls away some of the roller's electrons, leaving the roller with a positive charge, and the belt with a negative charge. This then causes electrons to concentrate at the tips of the lower brush (7), the longer the belt is turning, the higher the concentration of the electrons is. In the end this will cause the air around (7) to ionize, the electrons will then jump through the now conductive air towards the positively charged roller. But instead of hitting the roller, they meet the belt and are carried up to (2), the electrons are then pushed away from the negatively charged belt towards (2), (NOTE: the top roller must be made of an insulating material for this to work) where they are then led to the dome. As the belt continues to move, a constant charging current travels via the belt, and the sphere continues to accumulate negative charge until the rate that charge is being lost (through leakage and corona discharges) equals the charging current. The larger the sphere and the farther it is from ground, the higher will be its final potential.

The other method for building Van de Graaff generators is to use the triboelectric effect. The strong e-field from the rollers then induces a corona discharge at the tip of the pointed electrodes. The electrodes then "spray" a charge onto the belt which is opposite in polarity to the charge on the rollers. The remaining operation is otherwise the same as the voltage-injecting version above. This type of generator is easier to build for science fair or homemade projects, since it doesn't require a potentially dangerous high voltage source. The trade-off is that it cannot build up as high a voltage as the other type, and operation may become difficult under humid conditions (which can severely reduce triboelectric effects).

Since a Van de Graaff generator can supply the same small current at almost any level of electrical potential, it is an example of a nearly ideal current source. The maximum achievable potential is approximately equal to the sphere's radius multiplied by the e-field where corona discharges begin to form within the surrounding gas. For example, a polished spherical electrode 30 cm in diameter immersed in air at STP (which has a breakdown voltage of about 30 kV/cm) could be expected to develop a maximum voltage of about 450 kV.

[edit] History

A Van de Graaff generator integrated with a particle accelerator. The generator produces the high fields (in the megavolt range) that accelerate the particles.

The fundamental idea for the friction machine as high-voltage supply, using electrostatic influence to charge rotating disk or belt can be traced back to the 17th century or even before (cf. Friction machines History)

The Van de Graaff generator was developed, starting in 1929, by physicist Robert J. Van de Graaff at Princeton University. The first model was demonstrated in October 1929.[2] The first machine used a silk ribbon bought at a five and dime store as the charge transport belt. In 1931 a version able to produce 1,000,000 volts was described in a patent disclosure. This version had two 60 cm diameter charge accumulation spheres mounted on Pyrex glass columns 180 cm high; the apparatus cost only $90.[3]

Van de Graaff applied for a patent in December 1931, which was assigned to MIT in exchange for a share of net income. The patent was later granted.

In 1933 Van de Graaff built a 40-foot (12 m) model at MIT's Round Hill facility, the use of which was donated by Colonel Green.

A more recent development is the tandem Van de Graaff accelerator, containing one or more Van de Graaff generators, in which negatively charged ions are accelerated through one potential difference before being stripped of two or more electrons, inside a high voltage terminal, and accelerated again.

One of Van de Graaff's accelerators used two charged domes of sufficient size that each of the domes had laboratories inside - one to provide the source of the accelerated beam, and the other to analyze the actual experiment. The power for the equipment inside the domes came from generators that ran off the belt, and several sessions came to a rather spectacular end when a pigeon would try to fly between the two domes - causing them to discharge (The accelerator was set up in an airplane hangar).

By the 1970s, up to 14 million volts could be achieved at the terminal of a tandem that used a tank of high pressure sulfur hexafluoride (SF6) gas to prevent sparking by trapping electrons. This allowed the generation of heavy ion beams of several tens of megaelectronvolts, sufficient to study light ion direct nuclear reactions. The highest potential sustained by a Van de Graaff accelerator is 25.5 MV, achieved by the tandem at the Holifield Radioactive Ion Beam Facility at Oak Ridge National Laboratory.

A further development is the pelletron, where the rubber or fabric belt is replaced by a chain of short conductive rods connected by insulating links, and the air-ionizing electrodes are replaced by a grounded roller and inductive charging electrode. The chain can be operated at much higher velocity than a belt, and both the voltage and currents attainable are much higher than with a conventional Van de Graaff generator.

The Nuclear Structure Facility, or NSF [4] at Daresbury Laboratory, was proposed in the 1970s, commissioned in 1981 and opened for experiments in 1983. It consisted of a tandem Van de Graaff operating routinely at 20 MV, housed in a distinctive building 70 metres high. During its lifetime it accelerated 80 different ion beams for experimental use, ranging from protons to uranium. A particular feature was the ability to accelerate rare isotopic and radioactive beams. Perhaps the most important discovery made on the NSF was that of super-deformed nuclei. These nuclei, when formed from the fusion of lighter elements, rotate very rapidly. The pattern of gamma-rays emitted as they slow down provided detailed information about the inner structure of the nucleus. Following financial cutbacks, the NSF closed in 1993.

[edit] Van de Graaff generators on display

One of the largest Van de Graaff generators in the world, built by Dr. Van de Graaff himself, is now on permanent display at Boston's Museum of Science. With two conjoined 4.5 met (15 foot) aluminum spheres standing on columns many feet tall, this generator can often reach 2 million(2,000,000) volts. Shows using the Van de Graaff generator and several Tesla coils are conducted several times each day.

[edit] Comparison with other high voltage generators

Other classical electrostatic machines like a triplex Wimshurst Machine or a Bonetti machine[1] can easily produce more current, but the less insulated structures result in smaller voltages.

[edit] Patents

[edit] References

  1. ^ Zavisa, John M.. "How Van de Graaff Generators Work". HowStuffWorks. http://science.howstuffworks.com/vdg.htm. Retrieved on 2007-12-28. 
  2. ^ Van de Graaff biography
  3. ^ Article "Van de Graaff's Generator", in "Electrical Engineering Handbook", Richard C. Dorf (ed)., CRC Press, Boca Raton, Florida USA, 1993 ISBN 0-8493-0185-8
  4. ^ J S Lilley 1982 Phys. Scr. 25 435-442 doi:10.1088/0031-8949/25/3/001)

[edit] See also

[edit] External links

Personal tools