Accelerated Graphics Port

From Wikipedia, the free encyclopedia

Jump to: navigation, search
AGP
Accelerated Graphics Port Image:AGPLogo.svg

An AGP slot (having maroon color) and two PCI slots
Year created: 1997
Created by: Intel
Superseded by: PCI Express (2004)

Width in bits: 32
Number of devices: 1 device/slot
Capacity up to 2133 MB/s
Style: Parallel
Hotplugging? no
External? no

The Accelerated Graphics Port (also called Advanced Graphics Port, often shortened to AGP) is a high-speed point-to-point channel for attaching a graphics card to a computer's motherboard, primarily to assist in the acceleration of 3D computer graphics. Since 2004, AGP is being progressively phased out in favor of PCI Express. However, as of mid 2008 new AGP cards and motherboards are still available for purchase, though OEM driver support is minimal. [1]

Contents

[edit] Advantages over PCI

As computers became increasingly graphically oriented, successive generations of graphics adapters began to push the limits of PCI, a bus with shared bandwidth. This led to the development of AGP, a "bus" dedicated to graphics adapters.

For the needs of modern graphics adapters, AGP is superior to PCI because it provides a dedicated pathway between the slot and the processor rather than sharing the PCI bus, allowing for faster communication. AGP also uses sideband addressing, meaning that the address and data buses are separated so the entire packet does not need to be read to get addressing information. This is done by adding eight extra 8-bit buses which allow the graphics controller to issue new AGP requests and commands at the same time with other AGP data flowing via the main 32 address/data (AD) lines. This results in improved overall AGP data throughput.

In addition, to load a texture, a PCI graphics card must copy it from the system's RAM into the card's framebuffer, whereas an AGP card is capable of reading textures directly from system RAM using the Graphics Address Remapping Table (GART). GART reapportions main memory as needed for texture storage, allowing the graphics card to access them directly.[2] The maximum amount of system memory available to AGP is defined as the AGP aperture.

The two main reasons graphics cards with the PCI interface are still produced are that, first, they can be used in nearly any PC; because while some motherboards with built-in graphics adapters lack an AGP slot, few, if any, modern desktop PCs lack PCI slots. Secondly, a user with an appropriate operating system can use several PCI graphics cards (or several PCI graphics cards in combination with one AGP card) simultaneously — to give many different video outputs (for the use of many screens). This is almost impossible with AGP 1.0 and AGP 2.0 cards, because they do not support more than one AGP Master (video card) per AGP Target (chipset interface). AGP 3.0 does support more than one AGP Master per AGP Target, but nonetheless few PC motherboards are equipped with more than one AGP slot. Some server-class computers support having multiple AGP slots in a single system: the HP AlphaServer GS1280 has up to 64 AGP slots[3], the AlphaServer ES80 up to 4 AGP slots, and the AlphaServer ES47 up to 2 AGP slots.

[edit] History

The AGP slot first appeared on x86 compatible system boards based on Socket 7 Pentium and Slot 1 Pentium II processors. Intel introduced AGP support with the i440LX Slot 1 chipset in mid-October 1997 and a flood of products followed from all the major system board vendors.[4]

The first Socket 7 chipsets to support AGP were the VIA Apollo VP3, SiS 5591/5592, and the ALI Aladdin V. Intel never released an AGP-equipped Socket 7 chipset. FIC demonstrated the first Socket 7 AGP system board in November 1997 as the FIC PA-2012 based on the VIA Apollo VP3 chipset, followed very quickly by the EPoX P55-VP3 also based on the VIA VP3 chipset which was first to market.[5]

Early video chipsets featuring AGP support included the Rendition Vérité V2200, 3dfx Voodoo Banshee, Nvidia RIVA 128, 3Dlabs PERMEDIA 2, Intel i740, ATI Rage series, Matrox Millennium II, and S3 ViRGE GX/2. Some early AGP boards used graphics processors built around PCI and were simply bridged to AGP. This resulted in the cards benefiting little from the new bus, with the only improvement used being the 66 MHz bus clock, with its resulting doubled bandwidth over PCI, and bus exclusivity. Examples of such cards were the Voodoo Banshee, Vérité V2200, Millennium II, and S3 ViRGE GX/2. Intel's i740 was explicitly designed to exploit the new AGP feature set. In fact it was designed to texture only from AGP memory, making PCI versions of the board difficult to implement (local board RAM had to emulate AGP memory.)

Microsoft first introduced AGP support into Windows 95 OEM Service Release 2 (OSR2 version 1111 or 950B) via the USB SUPPLEMENT to OSR2 patch.[6] After applying the patch the Windows 95 system became Windows 95 version 4.00.950 B. The first Windows NT-based operating system to receive AGP support was Windows NT 4.0 with service pack 3, introduced in 1997. Linux support for AGP enhanced fast data transfers was first added in 1999 with the implementation of the AGPgart kernel module.

[edit] Versions of AGP

Intel released the first version of AGP, titled “AGP specification 1.0,” in 1997.[7] It included both the 1x and 2x speeds.[4] Specification 2.0 documented AGP 4X and 3.0 documented 8X.[8][9] Available versions include:

AGP 1x
A 32-bit channel operating at 66 MHz resulting in a maximum data rate of 266 megabytes per second (MB/s), doubled from the 133 MB/s transfer rate of PCI bus 33 MHz / 32-bit; 3.3 V signaling.
AGP 2x
A 32-bit channel operating at 66 MHz double pumped to an effective 133 MHz resulting in a maximum data rate of 533 MB/s; signaling voltages the same as AGP 1x;
AGP 4x
A 32-bit channel operating at 66 MHz quad pumped to an effective 266 MHz resulting in a maximum data rate of 1066 MB/s (1 GB/s); 1.5 V signaling;
AGP 8x
A 32-bit channel operating at 66 MHz, strobing eight times per clock, delivering an effective 533 MHz resulting in a maximum data rate of 2133 MB/s (2 GB/s); 0.8 V signaling.

There are various physical interfaces (i.e. shape of slots), as explained in the Compatibility section below.

AGP version 3.5 is only publicly mentioned by Microsoft under Universal Accelerated Graphics Port (UAGP), which specifies mandatory supports of extra registers once marked optional under AGP 3.0. Upgraded registers include PCISTS, CAPPTR, NCAPID, AGPSTAT, AGPCMD, NISTAT, NICMD. New required registers include APBASELO, APBASEHI, AGPCTRL, APSIZE, NEPG, GARTLO, GARTHI.

[edit] Variations

A number of non-standard variations of the AGP interface have been produced by manufacturers.

64-bit AGP
A 64-bit channel. Used in high-end professional graphic cards. It was once proposed as an optional standard for AGP 3.0 in draft documents, but was dropped in the final version of the standard.
Ultra-AGP, Ultra-AGPII
It is an internal AGP interface standard used by SiS for the north bridge controllers with integrated graphics. The original version supports same bandwidth as AGP 8x, while Ultra-AGPII has maximum 3.2GB/s bandwidth.
AGP Pro
This was a rarely-used slot for cards that required more electrical power. It is a longer slot with additional pins for that purpose. AGP Pro cards were usually workstation-class cards used to accelerate professional computer-aided design applications employed in the fields of architecture, machining, engineering, simulations, and similar fields.

[edit] PCI-based AGP ports

AGP Express
Not a true AGP interface, but rather a way to allow an AGP card to be connected over the legacy PCI bus on a PCI Express motherboard. It is a technology found on ECS motherboards, and is used as a selling point for AGP card owners who want a new motherboard but do not want to be forced to buy a PCIe graphics card as well (most new motherboards do not provide AGP slots, only PCIe slots). An "AGP Express" slot is basically a PCI slot (with the electrical power of two) in the AGP form factor. While it offers backward compatibility with AGP cards, its disadvantages include incomplete support (some AGP cards do not work with AGP Express) and reduced performance - the card is forced to use the shared PCI bus at its lower bandwidth, rather than having exclusive use of the faster AGP.
AGI
The ASRock Graphics Interface (AGI) is a proprietary variant of the Accelerated Graphics Port (AGP) standard. Its purpose is to provide AGP-support for those of Asrock's motherboards that use chipsets lacking native AGP-support. However, it's not fully compatible and several videocard chipsets are known to not be supported.
AGX
The EpoX Advanced Graphics eXtended (AGX) is also a proprietary variant of the Accelerated Graphics Port (AGP) standard. It shares the same problems with the AGI port explained above. User manuals even recommend not using AGP 8X ATI cards with AGX slots.
XGP
The Biostar Xtreme Graphics Port is also a variant of the Accelerated Graphics Port (AGP) standard. It is similar to the two standards above, in that it supports AGP cards with chipsets that do not support AGP. Also like the above, it has support issues with many AGP cards.

[edit] PCIe based AGP ports

AGR
The Advanced Graphics Riser is a variation of the AGP port used in some PCIe motherboards made by MSI to offer a limited backwards compatibility with AGP. It is, effectively, a modified PCIe slot allowing for performance comparable to an AGP 4x/8x slot [10], but with limited support of AGP cards. The manufacturer has published a non-exhaustive compatibility list of cards and chipsets that do work with the modified slot.

[edit] Compatibility

Compatibility, AGP Keys on card (top), on slot (bottom)

AGP cards are backward and forward compatible within limits. 1.5 V-only keyed cards will not go into 3.3 V slots and vice versa, though "Universal" slots exist which accept either type of card. AGP Pro cards will not fit into standard slots, but standard AGP cards will work in a Pro slot. Some cards, like Nvidia's GeForce 6 series or ATI's Radeon X800 series, only have keys for 1.5 V to prevent them from being installed in older mainboards without 1.5 V support. Some of the last modern cards with 3.3 V support were the Nvidia GeForce FX series and the ATI Radeon 9500/9700/9800(R350) (but not 9600/9800(R360)).

It is important to check voltage compatibility as some cards incorrectly have dual notches and some motherboards incorrectly have fully open slots. Furthermore, some poorly designed older 3.3 V cards incorrectly have the 1.5 V key. Inserting a card into a slot that does not support the correct signaling voltage may cause damage.

There are some proprietary exceptions to this rule. For example, Apple Power Macintosh computers with the Apple Display Connector (ADC) have an extra connector which delivers power to the attached display. Additionally, moving cards between computers of various CPU architectures may not work due to firmware issues.

[edit] Use today

As of 2009, few new motherboards feature AGP slots. No new motherboard chipsets are equipped with AGP support, but motherboards continue to be produced with older chipsets that have AGP support. PCI Express allows for higher data transfer rates, has more robust full-duplex support, and also supports other devices.

All new graphics processors are designed for PCI-Express. To create AGP graphics cards, those chips require an additional PCIe to AGP bridge chip to convert PCIe signals to and from AGP signals. This incurs additional board costs due to the need for the additional bridge chip and for a separate AGP-designed circuit board.

Various manufacturers of graphics cards continue to produce AGP cards for the shrinking AGP user-base. The first bridged cards were the GeForce 6600 and ATI Radeon X800 XL boards, released during 2004-5.[11][12] As of early 2009, AGP cards from Nvidia have a ceiling of the GeForce 7 series (despite the existence of a PCI version of a GeForce 8400[13] card, no manufacturer has made a comparable one for AGP systems). AMD's only official DirectX 10-capable AGP cards are from ATI's Radeon HD 2400 and 2600 budget and mid-range lines.

As of 2009, several manufacturers released AGP cards based on the mid-range Radeon HD3650 and the mid-high end HD3850.

In March 2009, PowerColor released two midrange AGP cards based on the latest technology - the HD4650 and HD4670.

[edit] See also

[edit] References

  1. ^ AGP almost at the end, Softpedia
  2. ^ What is AGP?, SysOpt, September 19, 2003.
  3. ^ HP AlphaServer GS1280 system Data sheet
  4. ^ a b Intel 440LX AGPset, Intel, accessed October 18, 2007.
  5. ^ Lal Shimpi, Anand. Chipset Guide (Socket 7), Anandtech, August 1, 1997.
  6. ^ Which version of Windows 95 supports AGP?, ComputerHope, accessed October 18, 2007.
  7. ^ Accelerated Graphics Port Interface Specification Rev. 1.0, Intel, accessed October 18, 2007.
  8. ^ AGP 4X: Faster Data Transfer & Better-Quality Images, Smart Computing, January 2000.
  9. ^ AGP 3.0 Specification, Intel, accessed October 18, 2007.
  10. ^ MSI K8N Neo3-F Motherboard Review - What's an AGR video slot?
  11. ^ Gasior, Geoff. Nvidia's GeForce 6600 GT AGP graphics card: Bridging backwards, Tech Report, November 16, 2004.
  12. ^ Gasior, Geoff. ATI's new AGP Radeons: A bridge is born, Tech Report, May 20, 2005.
  13. ^ BFG GeForce 8400 GS PCI Card, BFG Website. [1], Accessed on Feb. 24, 2009.

This article was originally based on material from the Free On-line Dictionary of Computing, which is licensed under the GFDL.

[edit] External links

Personal tools