analysis business cs definition defintion dev development engineering gathering info management mps problem-solving process progettazione project project-management project_management projectmanagement requirements requisiti rup software testing types 323

My tags:

From Wikipedia, the free encyclopedia

This article may require cleanup to meet Wikipedia's quality standards. Please improve this article if you can. (October 2007)

In engineering, a requirement is a singular documented need of what a particular product or service should be or do. It is most commonly used in a formal sense in systems engineering or software engineering. It is a statement that identifies a necessary attribute, capability, characteristic, or quality of a system in order for it to have value and utility to a user.^[1]

In the classical engineering approach, sets of requirements are used as inputs into the design stages of product development. Requirements show what elements and functions are necessary for the particular project.

The requirements development phase may have been preceded by a feasibility study, or a conceptual analysis phase of the project. The requirements phase may be broken down into requirements elicitation (gathering the requirements from stakeholders), analysis (checking for consistency and completeness), specification (documenting the requirements) and verification (making sure the specified requirements are correct)^[2].

Contents 1 Product versus process requirements 2 Requirements in systems and software engineering 3 Some factors in developing requirements 3.1 Classification 3.2 Good requirements 3.2.1 Verification 3.2.2 Requirements analysis or Requirements engineering 3.3 Documenting requirements 3.4 Changes in requirements 4 Disputes regarding the necessity of rigour in software requirements 5 See also 6 References 7 External links

[edit] Product versus process requirements

Projects are subject to three sorts of requirements. Business Requirements describe in business terms what must be delivered or accomplished to provide value. Product Requirements describe the system or product which is one of several possible ways to accomplish the business requirements. Process Requirements describe the processes the developing organization must follow and the constraints that they must obey.

The Product and Process requirements are closely linked. Process requirements are often imposed as a way of achieving some higher-level Product requirement. For example, a maximum development cost requirement (a Process requirement) may be imposed to help achieve a maximum sales price requirement (a Product requirement); a requirement for the product to be maintainable (a Product requirement) often is traced to by requirements to follow particular development styles (e.g., object-oriented programming), style-guides, or a review/inspection process (Process requirements).

[edit] Requirements in systems and software engineering

In systems engineering, a requirement can be a description of what a system must do, referred to as a Functional Requirement. This type of requirement specifies something that the delivered system must be able to do. Another type of requirement specifies something about the system itself, and how well it performs its functions. Such requirements are often called Non-functional requirements, or 'performance requirements' or 'quality of service requirements.' Examples of such requirements include usability, availability, reliability, supportability, testability, maintainability, and (if defined in a way that's verifiably measurable and unambiguous) ease-of-use.

A collection of requirements define the characteristics or features of the desired system. A 'good' list of requirements generally avoids saying how the system should implement the requirements, leaving such decisions to the system designer. Describing how the system should be implemented may be known as implementation bias or "solution engineering". However, implementation constraints (aka solution requirements) on the solution may be validly expressed by the future owner, for example for communality reasons with other owned products.

In software engineering, the same meaning of requirements apply, except that the focus of interest is the software itself.

[edit] Some factors in developing requirements

[edit] Classification

Requirements are typically placed into these categories:

• Functional requirements describe the functions that the system is to execute; for example, formatting some text or modulating a signal. They are sometimes known as capabilities.
• Non-functional requirements are the ones that act to constrain the solution. Nonfunctional requirements are sometimes known as constraints or quality requirements.

Non-functional requirements can be further classified according to whether they are performance requirements, maintainability requirements, safety requirements, reliability requirements, or one of many other types of requirements.

In software engineering this categorization is useful because only functional requirements can be directly implemented in software. The non-functional requirements are controlled by other aspects of the system. For example, in a computer system reliability is related to hardware failure rates, performance controlled by CPU and memory. Non-functional requirements can in some cases be decomposed into functional requirements for software. For example, a system level non-functional safety requirement can be decomposed into one or more functional requirements. See FURPS. In addition, a non-functional requirement may be converted into a process requirement when the requirement is not easily measurable. For example, a system level maintainability requirement may be decomposed into restrictions on software constructs or limits on lines or code.

[edit] Good requirements

The characteristics of good requirements are variously stated by different writers, with each writer generally emphasizing the characteristics most appropriate to their general discussion or the specific technology domain being addressed. However, the following characteristics are generally acknowledged^[3][4][5][6].

Characteristic	Explanation
Cohesive	The requirement addresses one and only one thing.
Complete	The requirement is fully stated in one place with no missing information.
Consistent	The requirement does not contradict any other requirement and is fully consistent with all authoritative external documentation.
Correct	The requirement meets all or part of a business need as authoritatively stated by stakeholders.
Current	The requirement has not been made obsolete by the passage of time.
Externally Observable	The requirement specifies a characteristic of the product that is externally observable or experienced by the user. "Requirements" that specify internal architecture, design, implementation, or testing decisions are properly constraints, and should be clearly articulated in the Constraints section of the Requirements document.
Feasible	The requirement can be implemented within the constraints of the project.
Unambiguous	The requirement is concisely stated without recourse to technical jargon, acronyms (unless defined elsewhere in the Requirements document), or other esoteric verbiage. It expresses objective facts, not subjective opinions. It is subject to one and only one interpretation. Vague subjects, adjectives, prepositions, verbs and subjective phrases are avoided. Negative statements and compound statements are prohibited.
Mandatory	The requirement represents a stakeholder-defined characteristic the absence of which will result in a deficiency that cannot be ameliorated.
Verifiable	The implementation of the requirement can be determined through one of four possible methods: inspection, analysis, demonstration, or test.

[edit] Verification

All requirements should be verifiable. The most common method is by test. If this is not the case, another verification method should be used instead (e.g. analysis, demonstration or inspection or review of design).

Certain requirements, by their very structure, are not verifiable. These include requirements that say the system shall never or always exhibit a particular property. Proper testing of these requirements would require an infinite testing cycle. Such requirements must be rewritten to be verifiable. As stated above all requirements must be verifiable.

Non-functional requirements, which are unverifiable at the software level, must still be kept as a documentation of customer intent; however they may traced to process requirements that are determined to be a practical way of meeting them. For example, a non-functional requirement to be free from backdoors may be satisfied by replacing it with a process requirement to use pair programming. Other non-functional requirements will trace to other system components and be verified at that level. For example system reliability is often verified by analysis at the system level. Avionics software with its complicated safety requirements must follow the DO-178B development process.

Verifiability is necessary for a requirement but there are other important issues. A requirement can be verifiable yet incorrect; and assessing verifiability alone will not detect incorrect requirements. Moreover, verification is totally irrelevant with regard to a requirement which has been overlooked. Mere analysis, inspection, or review alone will find some of these issues but generally is far weaker than usually is realized.

[edit] Requirements analysis or Requirements engineering

Requirements are prone to issues of ambiguity, incompleteness, and inconsistency. Techniques such as rigorous inspection have been shown to help deal with these issues. Ambiguities, incompleteness, and inconsistencies that can be resolved in the requirements phase typically cost orders of magnitude less to correct than when these same issues are found in later stages of product development. Requirements analysis strives to address these issues.

There is an engineering trade off to consider between requirements which are too vague, and those which are so detailed that they

1. take a long time to produce
2. limit the implementation options available
3. are costly to produce

[edit] Documenting requirements

Requirements are usually written as a means for communication between the different stakeholders. This means that the requirements should be easy to understand both for normal users and for developers. One common way to document a requirement is stating what the system shall do. Example: "The contractor shall deliver the product no later than xyz date." Other ways include use cases and user stories.

[edit] Changes in requirements

Requirements generally change with time. Once defined and approved, requirements should fall under change control. For many projects, requirements are altered before the system is complete. This is partly due to the complexity of computer software and the fact that users don't know what they want before they see it. This characteristic of requirements has led to requirements management studies and practices.

[edit] Disputes regarding the necessity of rigour in software requirements

Some modern software engineering methodologies like extreme programming question the need for rigorously describing software requirements, which they consider a moving target. Instead, they describe requirements informally using user stories (short summaries fitting on an index card explaining one aspect of what the system should do), and compose a series of acceptance test cases for this user story.

[edit] See also

• FURPS - acronym of key requirement categories
• Requirements analysis
• Requirements management
• Requirements Traceability
• Use case

[edit] References

[edit] External links

Look up requirement in Wiktionary, the free dictionary.

• Discovering System Requirements
• The International Institute for Business Analysis and The IIBA's Business Analysis Body of Knowledge