Water pollution

From Wikipedia, the free encyclopedia

Jump to: navigation, search
Raw sewage and industrial waste flows into the U.S. from Mexico as the New River passes from Mexicali, Baja California to Calexico, California.

Water pollution is the contamination of water bodies such as lakes, rivers, oceans, and groundwater caused by human activities, which can be harmful to organisms and plants that live in these water bodies.

Contents

[edit] Introduction

Water pollution is a major problem in the global context. It has been suggested that it is the leading worldwide cause of deaths and diseases,[1][2] and that it accounts for the deaths of more than 14,000 people daily.[2] In addition to the acute problems of water pollution in developing countries, industrialized countries continue to struggle with pollution problems as well. In the most recent national report on water quality in the United States, 45 percent of assessed stream miles, 47 percent of assessed lake acres, and 32 percent of assessed bay and estuarine square miles were classified as polluted.[3]

Water is typically referred to as polluted when it is impaired by anthropogenic contaminants and either does not support a human use, like serving as drinking water, and/or undergoes a marked shift in its ability to support its constituent biotic communities, such as fish. Natural phenomena such as volcanoes, algae blooms, storms, and earthquakes also cause major changes in water quality and the ecological status of water. Water pollution has many causes and characteristics.

[edit] Water pollution categories

Surface water and groundwater have often been studied and managed as separate resources, although they are interrelated.[4] Sources of surface water pollution are generally grouped into two categories based on their origin.

[edit] Point source pollution

Point source pollution refers to contaminants that enter a waterway through a discrete conveyance, such as a pipe or ditch. Examples of sources in this category include discharges from a sewage treatment plant, a factory, or a city storm drain. The U.S. Clean Water Act (CWA) defines point source for regulatory enforcement purposes.[5]

[edit] Non-point source pollution

Non-point source (NPS) pollution refers to diffuse contamination that does not originate from a single discrete source. NPS pollution is often a cumulative effect of small amounts of contaminants gathered from a large area. Nutrient runoff in stormwater from "sheet flow" over an agricultural field or a forest are sometimes cited as examples of NPS pollution.

Contaminated stormwater washed off of parking lots, roads and highways, called urban runoff, is sometimes included under the category of NPS pollution. However, this runoff is typically channeled into storm drain systems and discharged through pipes to local surface waters, and is a point source. The CWA definition of point source was amended in 1987 to include municipal storm sewer systems, as well as industrial stormwater, such as from construction sites.[6]

[edit] Groundwater pollution

Interactions between groundwater and surface water are complex. Consequently, groundwater pollution, sometimes referred to as groundwater contamination, is not as easily classified as surface water pollution.[4] By its very nature, groundwater aquifers are susceptible to contamination from sources that may not directly affect surface water bodies, and the distinction of point vs. nonpoint source may be irrelevant. A spill of a chemical contaminant on soil, located away from a surface water body, may not necessarily create point source or non-point source pollution, but nonetheless may contaminate the aquifer below. Analysis of groundwater contamination may focus on soil characteristics and hydrology, as well as the nature of the contaminant itself.

[edit] Causes of water pollution

The specific contaminants leading to pollution in water include a wide spectrum of chemicals, pathogens, and physical or sensory changes such as elevated temperature and discoloration. While many of the chemicals and substances that are regulated may be naturally occurring (calcium, sodium, iron, manganese, etc.) the concentration is often the key in determining what is a natural component of water, and what is a contaminant.

Oxygen-depleting substances may be natural materials, such as plant matter (e.g. leaves and grass) as well as man-made chemicals. Other natural and anthropogenic substances may cause turbidity (cloudiness) which blocks light and disrupts plant growth, and clogs the gills of some fish species.[7]

Many of the chemical substances are toxic. Pathogens can produce waterborne diseases in either human or animal hosts. Alteration of water's physical chemistry include acidity (change in pH), electrical conductivity, temperature, and eutrophication. Eutrophication is the fertilization of surface water by nutrients that were previously scarce.

[edit] Pathogens

A manhole cover blown off by a sanitary sewer overflow.

Coliform bacteria are a commonly-used bacterial indicator of water pollution, although not an actual cause of disease. Other microorganisms sometimes found in surface waters which have caused human health problems include:

High levels of pathogens may result from inadequately treated sewage discharges.[10] This can be caused by a sewage plant designed with less than secondary treatment (more typical in less-developed countries). In developed countries, older cities with aging infrastructure may have leaky sewage collection systems (pipes, pumps, valves), which can cause sanitary sewer overflows. Some cities also have combined sewers, which may discharge untreated sewage during rain storms.[11]

Pathogen discharges may also be caused by poorly-managed livestock operations.

[edit] Chemical and other contaminants

Muddy river polluted by sediment. Photo courtesy of United States Geological Survey.

Contaminants may include organic and inorganic substances.

Organic water pollutants include:

Inorganic water pollutants include:

Macroscopic pollution--large visible items polluting the water--may be termed "floatables" in an urban stormwater context, or marine debris when found on the open seas, and can include such items as:

  • Trash (e.g. paper, plastic, or food waste) discarded by people on the ground, and that are washed by rainfall into storm drains and eventually discharged into surface waters
  • Nurdles, small ubiquitous waterborne plastic pellets
  • Shipwrecks, large derelict ships
Potrero Generating Station discharges heated water into San Francisco Bay.[14]

[edit] Thermal pollution

Thermal pollution is the rise or fall in the temperature of a natural body of water caused by human influence. A common cause of thermal pollution is the use of water as a coolant by power plants and industrial manufacturers. Elevated water temperatures decreases oxygen levels (which can kill fish) and affects ecosystem composition, such as invasion by new thermophilic species. Urban runoff may also elevate temperature in surface waters.

Thermal pollution can also be caused by the release of very cold water from the base of reservoirs into warmer rivers.

[edit] Transport and chemical reactions of water pollutants

Most water pollutants are eventually carried by rivers into the oceans. In some areas of the world the influence can be traced hundred miles from the mouth by studies using hydrology transport models. Advanced computer models such as SWMM or the DSSAM Model have been used in many locations worldwide to examine the fate of pollutants in aquatic systems. Indicator filter feeding species such as copepods have also been used to study pollutant fates in the New York Bight, for example. The highest toxin loads are not directly at the mouth of the Hudson River, but 100 kilometers south, since several days are required for incorporation into planktonic tissue. The Hudson discharge flows south along the coast due to coriolis force. Further south then are areas of oxygen depletion, caused by chemicals using up oxygen and by algae blooms, caused by excess nutrients from algal cell death and decomposition. Fish and shellfish kills have been reported, because toxins climb the food chain after small fish consume copepods, then large fish eat smaller fish, etc. Each successive step up the food chain causes a stepwise concentration of pollutants such as heavy metals (e.g. mercury) and persistent organic pollutants such as DDT. This is known as biomagnification, which is occasionally used interchangeably with bioaccumulation.

Large gyres (vortexes) in the oceans trap floating plastic debris. The North Pacific Gyre for example has collected the so-called "Great Pacific Garbage Patch" that is now estimated at 100 times the size of Texas. Many of these long-lasting pieces wind up in the stomachs of marine birds and animals. This results in obstruction of digestive pathways which leads to reduced appetite or even starvation.

Many chemicals undergo reactive decay or chemically change especially over long periods of time in groundwater reservoirs. A noteworthy class of such chemicals is the chlorinated hydrocarbons such as trichloroethylene (used in industrial metal degreasing and electronics manufacturing) and tetrachloroethylene used in the dry cleaning industry (note latest advances in liquid carbon dioxide in dry cleaning that avoids all use of chemicals). Both of these chemicals, which are carcinogens themselves, undergo partial decomposition reactions, leading to new hazardous chemicals (including dichloroethylene and vinyl chloride).

Groundwater pollution is much more difficult to abate than surface pollution because groundwater can move great distances through unseen aquifers. Non-porous aquifers such as clays partially purify water of bacteria by simple filtration (adsorption and absorption), dilution, and, in some cases, chemical reactions and biological activity: however, in some cases, the pollutants merely transform to soil contaminants. Groundwater that moves through cracks and caverns is not filtered and can be transported as easily as surface water. In fact, this can be aggravated by the human tendency to use natural sinkholes as dumps in areas of Karst topography.

There are a variety of secondary effects stemming not from the original pollutant, but a derivative condition. An example is silt-bearing surface runoff, which can inhibit the penetration of sunlight through the water column, hampering photosynthesis in aquatic plants.

[edit] Measurement of water pollution

Environmental Scientists preparing water autosamplers.

Water pollution may be analyzed through several broad categories of methods: physical, chemical and biological. Most methods involve collection of samples, followed by specialized analytical tests. Some methods may be conducted in situ, without sampling, such as temperature. Government agencies and research organizations have published standardized, validated analytical test methods to facilitate the comparability of results from disparate testing events.[15]

[edit] Sampling

Sampling of water for physical or chemical testing can be done by several methods, depending on the accuracy needed and the characteristics of the contaminant. Many contamination events are sharply restricted in time, most commonly in association with rain events. For this reason "grab" samples are often inadequate for fully quantifying contaminant levels. Scientists gathering this type of data often employ auto-sampler devices that pump increments of water at either time or discharge intervals.

Sampling for biological testing involves collection of plants and/or animals from the surface water body. Depending on the type of assessment, the organisms may be identified for biosurveys (population counts) and returned to the water body, or they may be dissected for bioassays to determine toxicity.

[edit] Physical testing

Common physical tests of water include temperature, solids concentration and turbidity.

[edit] Chemical testing

Water samples may be examined using the principles of analytical chemistry. Many published test methods are available for both organic and inorganic compounds. Frequently-used methods include pH, biochemical oxygen demand (BOD), chemical oxygen demand (COD), nutrients (nitrate and phosphorus compounds), metals (including copper, zinc, cadmium, lead and mercury), oil and grease, total petroleum hydrocarbons (TPH), and pesticides.

[edit] Biological testing

Biological testing involves the use of plant, animal, and/or microbial indicators to monitor the health of an aquatic ecosystem.

[edit] Control of water pollution

[edit] Domestic sewage

In urban areas, domestic sewage is typically treated by centralized sewage treatment plants. In the U.S., most of these plants are operated by local government agencies. Municipal treatment plants are designed to control conventional pollutants: BOD and suspended solids. Well-designed and operated systems (i.e., secondary treatment or better) can remove 90 percent or more of these pollutants. Some plants have additional sub-systems to treat nutrients and pathogens. Most municipal plants are not designed to treat toxic pollutants found in industrial wastewater.[16]

Cities with sanitary sewer overflows or combined sewer overflows employ one or more engineering approaches to reduce discharges of untreated sewage, including:

  • utilizing a green infrastructure approach to improve stormwater management capacity throughout the system[17]
  • repair and replacement of leaking and malfunctioning equipment[11]
  • increasing overall hydraulic capacity of the sewage collection system (often a very expensive option).

A household or business not served by a municipal treatment plant may have an individual septic tank, which treats the wastewater on site and discharges into the soil. Alternatively, domestic wastewater may be sent to a nearby privately-owned treatment system (e.g. in a rural community).

[edit] Industrial wastewater

Dissolved air flotation system for treating industrial wastewater.

Some industrial facilities generate ordinary domestic sewage that can be treated by municipal facilities. Industries that generate wastewater with high concentrations of conventional pollutants (e.g. oil and grease), toxic pollutants (e.g. heavy metals, volatile organic compounds) or other nonconventional pollutants such as ammonia, need specialized treatment systems. Some of these facilities can install a pre-treatment system to remove the toxic components, and then send the partially-treated wastewater to the municipal system. Industries generating large volumes of wastewater typically operate their own complete on-site treatment systems.

Some industries have been successful at redesigning their manufacturing processes to reduce or eliminate pollutants, through a process called pollution prevention.

Heated water generated by power plants or manufacturing plants may be controlled with:

[edit] Agricultural wastewater

Riparian buffer lining a creek in Iowa

Nonpoint source controls
Sediment (loose soil) washed off fields is the largest source of agricultural pollution in the United States.[7] Farmers may utilize erosion controls to reduce runoff flows and retain soil on their fields. Common techniques include contour plowing, crop mulching, crop rotation, planting perennial crops and installing riparian buffers.[18] [19]:pp. 4-95–4-96

Nutrients (nitrogen and phosphorus) are typically applied to farmland as commercial fertilizer; animal manure; or spraying of municipal or industrial wastewater (effluent) or sludge. Nutrients may also enter runoff from crop residues, irrigation water, wildlife, and atmospheric deposition.[19]:p. 2-9 Farmers can develop and implement nutrient management plans to reduce excess application of nutrients.[18] [19]:pp. 4-37–4-38

To minimize pesticide impacts, farmers may use Integrated Pest Management (IPM) techniques (which can include biological pest control) to maintain control over pests, reduce reliance on chemical pesticides, and protect water quality.[20]

Confined Animal Feeding Operation in the United States

Point source wastewater treatment
Farms with large livestock and poultry operations, such as factory farms, are called concentrated animal feeding operations or confined animal feeding operations in the U.S. and are being subject to increasing government regulation.[21][22] Animal slurries are usually treated by containment in lagoons before disposal by spray or trickle application to grassland. Constructed wetlands are sometimes used to facilitate treatment of animal wastes, as are anaerobic lagoons. Some animal slurries are treated by mixing with straw and composted at high temperature to produce a bacteriologically sterile and friable manure for soil improvement.

[edit] Construction site stormwater

Silt fence installed on a construction site.

Sediment from construction sites is managed by installation of:

Discharge of toxic chemicals such as motor fuels and concrete washout is prevented by use of:

  • spill prevention and control plans, and
  • specially-designed containers (e.g. for concrete washout) and structures such as overflow controls and diversion berms.[24]

[edit] Urban runoff (stormwater)

Retention basin for controlling urban runoff

Effective control of urban runoff involves reducing the velocity and flow of stormwater, as well as reducing pollutant discharges. Local governments use a variety of stormwater management techniques to reduce the effects of urban runoff. These techniques, called best management practices (BMPs) in the U.S., may focus on water quantity control, while others focus on improving water quality, and some perform both functions.[25]

Pollution prevention practices include low impact development techniques, installation of green roofs and improved chemical handling (e.g. management of motor fuels & oil, fertilizers and pesticides).[26] Runoff mitigation systems include infiltration basins, bioretention systems, constructed wetlands, retention basins and similar devices.[27] [28]

Thermal pollution from runoff can be controlled by stormwater management facilities that absorb the runoff or direct it into groundwater, such as bioretention systems and infiltration basins. Retention basins tend to be less effective at reducing temperature, as the water may be heated by the sun before being discharged to a receiving stream.[25]:p. 5-58

[edit] Regulatory framework

In developed countries, the primary focus of legislation and efforts to curb water pollution for the past several decades was first aimed at point sources. As many point sources have been effectively regulated--principally factories and sewage treatment plants--greater attention has been placed on controlling municipal and industrial stormwater discharges, and NPS contributions.[29]

[edit] United Kingdom

In the UK there are common law rights (civil rights) to protect the passage of water across land unfettered in either quality of quantity. Criminal laws dating back to the 16th century exercised some control over water pollution but it was not until the Rivers (Prevention of pollution) Acts 1951 - 1961 were enacted that any systematic control over water pollution was established. These laws were strengthened and extended in the Control of Pollution Act 1984 which has since been updated and modified by a series of further acts. It is a criminal offence to either pollute a lake, river, groundwater or the sea or to discharge any liquid into such water bodies without proper authority. In England and Wales such permission can only be issued by the Environment Agency and in Scotland by SEPA.

[edit] United States

In the USA, concern over water pollution resulted in the enactment of state anti-pollution laws in the latter half of the 19th century, and federal legislation enacted in 1899. The Refuse Act of the federal Rivers and Harbors Act of 1899 prohibits the disposal of any refuse matter from into either the nation's navigable rivers, lakes, streams, and other navigable bodies of water, or any tributary to such waters, unless one has first obtained a permit. The Water Pollution Control Act, passed in 1948, gave authority to the Surgeon General to reduce water pollution. However, this law did not lead to major reductions in pollution.

Growing public awareness and concern for controlling water pollution led Congress to carry out a major re-write of water pollution law in 1972. The Federal Water Pollution Control Act Amendments of 1972, commonly known as the Clean Water Act (CWA), established the basic mechanisms for controlling point source pollution.[30] The law mandated the United States Environmental Protection Agency (EPA) to publish and enforce wastewater standards for industry and municipal sewage treatment plants. The Act also continued requirements that EPA and states issue water quality standards for surface water bodies. Congress included authorization in the Act for major public financing to build municipal sewage treatment plants. The 1972 CWA, however, did not require similar regulatory standards for non-point sources.

In 1987, Congress expanded the coverage of the CWA with enactment of the Water Quality Act.[31] These amendments defined both municipal and industrial stormwater discharges as point sources and required these facilities to obtain discharge permits. The 1987 law also re-organized the public financing of municipal treatment projects and created a non-point source demonstration grant program. Further amplification of the CWA included the enactment of the Great Lakes Legacy Act of 2002.[32]

[edit] See also

[edit] References

  1. ^ Pink, Daniel H. (April 19, 2006). "Investing in Tomorrow's Liquid Gold". Yahoo. http://finance.yahoo.com/columnist/article/trenddesk/3748. 
  2. ^ a b West, Larry (March 26, 2006). "World Water Day: A Billion People Worldwide Lack Safe Drinking Water". About. http://environment.about.com/od/environmentalevents/a/waterdayqa.htm. 
  3. ^ United States Environmental Protection Agency (EPA). Washington, DC. "The National Water Quality Inventory: Report to Congress for the 2002 Reporting Cycle – A Profile." October 2007. Fact Sheet No. EPA 841-F-07-003.
  4. ^ a b United States Geological Survey (USGS). Denver, CO. "Ground Water and Surface Water: A Single Resource." USGS Circular 1139. 1998.
  5. ^ Clean Water Act, section 502(14), 33 U.S.C. § 1362 (14).
  6. ^ CWA section 402(p), 33 U.S.C. § 1342(p)
  7. ^ a b U.S. EPA. "Protecting Water Quality from Agricultural Runoff." Fact Sheet No. EPA-841-F-05-001. March 2005.
  8. ^ USGS. Reston, VA. "A Primer on Water Quality." FS-027-01. March 2001.
  9. ^ Schueler, Thomas R. "Microbes and Urban Watersheds: Concentrations, Sources, & Pathways." Reprinted in The Practice of Watershed Protection. 2000. Center for Watershed Protection. Ellicott City, MD.
  10. ^ U.S. EPA. “Illness Related to Sewage in Water.” Accessed 2009-02-20.
  11. ^ a b U.S. EPA. "Report to Congress: Impacts and Control of CSOs and SSOs." August 2004. Document No. EPA-833-R-04-001.
  12. ^ a b c G. Allen Burton, Jr., Robert Pitt (2001). Stormwater Effects Handbook: A Toolbox for Watershed Managers, Scientists, and Engineers. New York: CRC/Lewis Publishers. ISBN 0-87371-924-7. http://unix.eng.ua.edu/~rpitt/Publications/BooksandReports/Stormwater%20Effects%20Handbook%20by%20%20Burton%20and%20Pitt%20book/MainEDFS_Book.html.  Chapter 2.
  13. ^ Schueler, Thomas R. "Cars Are Leading Source of Metal Loads in California." Reprinted in The Practice of Watershed Protection. 2000. Center for Watershed Protection. Ellicott City, MD.
  14. ^ Selna, Robert (2009). "Power plant has no plans to stop killing fish." San Francisco Chronicle, January 2, 2009.
  15. ^ For example, see Clescerl, Leonore S.(Editor), Greenberg, Arnold E.(Editor), Eaton, Andrew D. (Editor). Standard Methods for the Examination of Water and Wastewater (20th ed.) American Public Health Association, Washington, DC. ISBN 0-87553-235-7. This publication is also available on CD-ROM and online by subscription.
  16. ^ U.S. EPA (2004)."Primer for Municipal Wastewater Treatment Systems." Document No. EPA 832-R-04-001.
  17. ^ U.S. EPA. "Green Infrastructure Case Studies: Philadelphia." December 9, 2008.
  18. ^ a b U.S. Natural Resources Conservation Service (NRCS). Washington, DC. "National Conservation Practice Standards." National Handbook of Conservation Practices. Accessed 2009-03-28.
  19. ^ a b c EPA. "National Management Measures to Control Nonpoint Source Pollution from Agriculture." July 2003. Document No. EPA-841-B-03-004.
  20. ^ EPA. "Integrated Pest Management Principles." March 13, 2008.
  21. ^ EPA. "Animal Feeding Operations." December 15, 2008.
  22. ^ Iowa Department of Natural Resources. Des Moines, IA. "Animal Feeding Operations in Iowa." Accessed 2009-03-05.
  23. ^ Tennessee Department of Environment and Conservation. Nashville, TN."Tennessee Erosion and Sediment Control Handbook." 2002.
  24. ^ U.S. EPA (2006). "Construction Site Stormwater Runoff Control." National Menu of Stormwater Best Management Practices.
  25. ^ a b U.S. EPA (1999)."Preliminary Data Summary of Urban Storm Water Best Management Practices." Chapter 5. Document No. EPA-821-R-99-012.
  26. ^ EPA. "Fact Sheet: Low Impact Development and Other Green Design Strategies." October 9, 2008.
  27. ^ California Stormwater Quality Association. Menlo Park, CA. "Stormwater Best Management Practice (BMP) Handbooks." 2003.
  28. ^ New Jersey Department of Environmental Protection. Trenton, NJ. "New Jersey Stormwater Best Management Practices Manual." April 2004.
  29. ^ Copeland, Claudia. "Stormwater Permits: Status of EPA's Regulatory Program." United States Congressional Research Service, Washington, DC. 1998. CRS Report No. 97-290 ENR.
  30. ^ Pub.L. 92-500, October 18, 1972. 33 U.S.C. § 1251 et seq.
  31. ^ Pub.L. 100-4, February 4, 1987.
  32. ^ Pub.L. 107-303, November 27, 2002

[edit] External links

Overview Information

Analytical Tools and Other Specialized Resources


Personal tools