Utility

From Wikipedia, the free encyclopedia

For other uses, see Utility (disambiguation).

In economics, utility is a measure of the relative satisfaction from, or desirability of, consumption of various goods and services. Given this measure, one may speak meaningfully of increasing or decreasing utility, and thereby explain economic behavior in terms of attempts to increase one's utility. For illustrative purposes, changes in utility are sometimes expressed in units called utils.

The doctrine of utilitarianism saw the maximization of utility as a moral criterion for the organization of society. According to utilitarians, such as Jeremy Bentham (1748-1832) and John Stuart Mill (1806-1876), society should aim to maximize the total utility of individuals, aiming for "the greatest happiness for the greatest number". Another theory forwarded by John Rawls (1921-2002) would have society maximize the utility of the individual receiving the minimum amount of utility.

In neoclassical economics, rationality is precisely defined in terms of imputed utility-maximizing behavior under economic constraints. As a hypothetical behavioral measure, utility does not require attribution of mental states suggested by "happiness", "satisfaction", etc.

Utility can be applied by economists in such constructs as the indifference curve, which plots the combination of commodities that an individual or a society would accept to maintain a given level of satisfaction. Individual utility and social utility can be construed as the dependent variable of a utility function (such as an indifference curve map) and a social welfare function respectively. When coupled with production or commodity constraints, these functions can represent Pareto efficiency, such as illustrated by Edgeworth boxes in contract curves. Such efficiency is a central concept of welfare economics.

[edit] Cardinal and ordinal utility

Economists distinguish between cardinal utility and ordinal utility. When cardinal utility is used, the magnitude of utility differences is treated as an ethically or behaviorally significant quantity. On the other hand, ordinal utility captures only ranking and not strength of preferences. An important example of a cardinal utility is the probability of achieving some target.

Utility functions of both sorts assign real numbers (utils) to members of a choice set. For example, suppose a cup of orange juice has utility of 120 utils, a cup of tea has a utility of 80 utils, and a cup of water has a utility of 40 utils. When speaking of cardinal utility, it could be concluded that the cup of orange juice is better than the cup of tea by exactly the same amount by which the cup of tea is better than the cup of water. One is not entitled to conclude, however, that the cup of tea is two thirds as good as the cup of juice, because this conclusion would depend not only on magnitudes of utility differences, but also on the "zero" of utility.

It is tempting when dealing with cardinal utility to aggregate utilities across persons. The argument against this is that interpersonal comparisons of utility are suspect because there is no good way to interpret how different people value consumption bundles.

When ordinal utilities are used, differences in utils are treated as ethically or behaviorally meaningless: the utility values assigned encode a full behavioral ordering between members of a choice set, but nothing about strength of preferences. In the above example, it would only be possible to say that juice is preferred to tea to water, but no more.

Neoclassical economics has largely retreated from using cardinal utility functions as the basic objects of economic analysis, in favor of considering agent preferences over choice sets. As will be seen in subsequent sections, however, preference relations can often be rationalized as utility functions satisfying a variety of useful properties.

Ordinal utility functions are equivalent up to monotone transformations, while cardinal utilities are equivalent up to positive linear transformations.

[edit] Utility functions

While preferences are the conventional foundation of microeconomics, it is often convenient to represent preferences with a utility function and reason indirectly about preferences with utility functions. Let X be the consumption set, the set of all mutually-exclusive packages the consumer could conceivably consume (such as an indifference curve map without the indifference curves). The consumer's utility function $u : X \rightarrow \textbf R$ ranks each package in the consumption set. If u(x) ≥ u(y), then the consumer strictly prefers x to y or is indifferent between them.

For example, suppose a consumer's consumption set is X = {nothing, 1 apple, 1 orange, 1 apple and 1 orange, 2 apples, 2 oranges}, and its utility function is u(nothing) = 0, u (1 apple) = 1, u (1 orange) = 2, u (1 apple and 1 orange) = 4, u (2 apples) = 2 and u (2 oranges) = 3. Then this consumer prefers 1 orange to 1 apple, but prefers one of each to 2 oranges.

In microeconomic models, there are usually a finite set of L commodities, and a consumer may consume an arbitrary amount of each commodity. This gives a consumption set of $\textbf R^L_+$ , and each package $x \in \textbf R^L_+$ is a vector containing the amounts of each commodity. In the previous example, we might say there are two commodities: apples and oranges. If we say apples is the first commodity, and oranges the second, then the consumption set X = $\textbf R^2_+$ and u (0, 0) = 0, u (1, 0) = 1, u (0, 1) = 2, u (1, 1) = 4, u (2, 0) = 2, u (0, 2) = 3 as before. Note that for u to be a utility function on X, it must be defined for every package in X.

A utility function $u : X \rightarrow \textbf{R}$ rationalizes a preference relation $\preceq$ on X if for every $x, y \in X$ , $u(x)\leq u(y)$ if and only if $x\preceq y$ . If u rationalizes $\preceq$ , then this implies $\preceq$ is complete and transitive, and hence rational.

In order to simplify calculations, various assumptions have been made of utility functions.

CES (constant elasticity of substitution, or isoelastic) utility
Exponential utility
Quasilinear utility
Homothetic utility

Most utility functions used in modeling or theory are well-behaved. They usually exhibit monotonicity, convexity, and global non-satiation. There are some important exceptions, however.

Lexicographic preferences cannot even be represented by a utility function.^[1]^{[citation needed]}

[edit] Expected utility

Main article: Expected utility hypothesis

The expected utility theory deals with the analysis of choices among risky projects with (possibly multidimensional) outcomes.

The expected utility model was first proposed by Nicholas Bernoulli in 1713 and solved by Daniel Bernoulli in 1738 as the St. Petersburg paradox. Bernoulli argued that the paradox could be resolved if decisionmakers displayed risk aversion and argued for a logarithmic cardinal utility function.

The first important use of the expected utility theory was that of John von Neumann and Oskar Morgenstern who used the assumption of expected utility maximization in their formulation of game theory.

[edit] Additive von Neumann-Morgenstern Utility

In older definitions of utility, it makes sense to rank utilities, but not to add them together. A person can say that a new shirt is preferable to a baloney sandwich, but not that it is twenty times preferable to the sandwich.

The reason is that the utility of twenty sandwiches is not twenty times the utility of one sandwich, by the law of diminishing returns. So it is hard to compare the utility of the shirt with 'twenty times the utility of the sandwich'. But Von Neumann and Morgenstern suggested an unambiguous way of making a comparison like this.

Their method of comparison involves considering probabilities. If a person can choose between various randomized events (lotteries), then it is possible to additively compare the shirt and the sandwich. It is possible to compare a sandwich with probability 1, to a shirt with probability p or nothing with probability 1-p. By adjusting p, the point at which the sandwich becomes preferable defines the ratio of the utilities of the two options.

A notation for a lottery is as follows: if options A and B have probability p and 1-p in the lottery, write it as a linear combination:

$L = p A + (1-p) B \,$

More generally, for a lottery with many possible options:

$L = \sum p_i A_i \,$ .

By making some reasonable assumptions about the way choices behave, von Neumann and Morgenstern showed that if an agent can choose between the lotteries, then this agent has a utility function which can be added and multiplied by real numbers, which means the utility of an arbitrary lottery can be calculated as a linear combination of the utility of its parts.

This is called the expected utility theorem. The required assumptions are four axioms about the properties of the agent's preference relation over 'simple lotteries', which are lotteries with just two options. Writing $B\preceq A$ to mean 'A is preferred to B', the axioms are:

completeness: For any two simple lotteries $\,L\,$ and $\,M\,$ , either $L\preceq M$ , $\,L=M\,$ , or $M\preceq L$ .
transitivity: if $L\preceq M$ and $M\preceq N$ , then $L\preceq N$ .
convexity/continuity (Archimedean property): If $L \preceq M\preceq N$ , then there is a $\,p\,$ between 0 and 1 such that the lottery $\,pL + (1-p)N\,$ is equally preferable to $\,M\,$ .
independence: if $\,L=M\,$ , then $\,pL+(1-p)N = pM+(1-p)N\,$ .

In more formal language: A von Neumann-Morgenstern utility function is a function from choices to the real numbers:

$u : X \rightarrow \textbf{R}$

which assigns a real number to every outcome in a way that captures the agent's preferences over both simple and compound lotteries. The agent will prefer a lottery $L 2$ to a lottery $L 1$ if and only if the expected utility of $L 2$ is greater than the expected utility of $L 1$ :

$L_1\preceq L_2 \; \mathrm{iff} \; u(L_1)\leq u(L_2).$

Repeating in category language: $u$ is a morphism between the category of preferences with uncertainty and the category of reals as an additive group.

Of all the axioms, independence is the most often discarded. A variety of generalized expected utility theories have arisen, most of which drop or relax the independence axiom.

CES (constant elasticity of substitution, or isoelastic) utility is one with constant relative risk aversion
Exponential utility exhibits constant absolute risk aversion

[edit] Utility of money

One of the most common uses of a utility function, especially in economics, is the utility of money. The utility function for money is a nonlinear function that is bounded and asymmetric about the origin. These properties can be derived from reasonable assumptions that are generally accepted by economists and decision theorists, especially proponents of rational choice theory. The utility function is concave in the positive region, reflecting the phenomenon of diminishing marginal utility. The boundedness reflects the fact that beyond a certain point money ceases being useful at all, as the size of any economy at any point in time is itself bounded. The asymmetry about the origin reflects the fact that gaining and losing money can have radically different implications both for individuals and businesses. The nonlinearity of the utility function for money has profound implications in decision making processes: in situations where outcomes of choices influence utility through gains or losses of money, which are the norm in most business settings, the optimal choice for a given decision depends on the possible outcomes of all other decisions in the same time-period. ^[2]

[edit] Discussion and criticism

Different value systems have different perspectives on the use of utility in making moral judgments. For example, Marxists, Kantians, and certain libertarians (such as Nozick) all believe utility to be irrelevant as a moral standard or at least not as important as other factors such as natural rights, law, conscience and/or religious doctrine. It is debatable whether any of these can be adequately represented in a system that uses a utility model.

Another criticism come from the assertion that neither cardinal nor ordinary utility are empirically observable in the real world. In case of cardinal utility it is impossible to measure the level of satisfaction "quantitatively" when someone consume/purchase an apple. In case of ordinal utility, it is impossible to determine what choice were made when someone purchase an orange. Any act would involve preference over infinite possibility of set choices such as (apple, orange juice, other vegetable, vitamin C tablets, exercise, not purchasing, etc). [1][2][3]

Environmental economists (such as Herman Daly) suggest that the concept of "disutility" is central to the theoretical framework, proposing that beyond a certain level of aggregate utility, the disutility (due to aspects such as rising pollution, traffic and other causes of dis-satisfaction) surpasses the level of utility. Therefore, maximising utility should take environmental aspects into consideration, for too much of consumer satisfaction brings several negative factors along.

[edit] See also

The Utilitarianism series,
part of the Politics series

Utilitarian Thinkers

Forms

Predecessors

Key concepts

Problems

See Also

Portal:Politics

[edit] References and additional reading

^ Jonathan E. Ingersoll, Jr. Theory of Financial Decision Making. Rowman and Littlefield, 1987. p. 21
^ J.O. Berger, Statistical Decision Theory and Bayesian Analysis. Springer-Verlag 2nd ed. (1985) ch. 2. (ISBN 3540960988)

Neumann, John von and Morgenstern, Oskar Theory of Games and Economic Behavior. Princeton, NJ. Princeton University Press. 1944 sec.ed. 1947
Nash Jr., John F. The Bargaining Problem. Econometrica 18:155 1950
Anand, Paul. Foundations of Rational Choice Under Risk Oxford, Oxford University Press. 1993 reprinted 1995, 2002
Kreps, David M. Notes on the Theory of Choice. Boulder, CO. Westview Press. 1988
Fishburn, Peter C. Utility Theory for Decision Making. Huntington, NY. Robert E. Krieger Publishing Co. 1970. ISBN 978-0471260608
Plous, S. The Psychology of Judgement and Decision Making New York: McGraw-Hill, 1993
Virine, L. and Trumper M., Project Decisions: The Art and Science. Management Concepts. Vienna, VA, 2007. ISBN 978-1567262179

[edit] External links

[0] Jonathan E. Ingersoll, Jr. Theory of Financial Decision Making. Rowman and Littlefield, 1987. p. 21

[1] J.O. Berger, Statistical Decision Theory and Bayesian Analysis. Springer-Verlag 2nd ed. (1985) ch. 2. (ISBN 3540960988)

[1]

[2]

Utility

From Wikipedia, the free encyclopedia

Contents

[edit] Cardinal and ordinal utility

[edit] Utility functions

[edit] Expected utility

[edit] Additive von Neumann-Morgenstern Utility

[edit] Utility of money

[edit] Discussion and criticism

[edit] See also

[edit] References and additional reading

[edit] External links

Views

Personal tools

Navigation

Search

Interaction

Toolbox

Languages