Radiometric dating

From Wikipedia, the free encyclopedia

Jump to: navigation, search

Radiometric dating (often called radioactive dating) is a technique used to date materials, usually based on a comparison between the observed abundance of a naturally occurring radioactive isotope and its decay products, using known decay rates; and based on an observation of the relative quantities of the isotope and its daughter products.[1] It is the principal source of information about the absolute age of rocks and other geological features, including the age of the Earth itself, and can be used to date a wide range of natural and man-made materials. Together with stratigraphic principles, radiometric dating methods are used in geochronology to establish the geological time scale.[2] Among the best-known techniques are radiocarbon dating, potassium-argon dating and uranium-lead dating. By allowing the establishment of geological timescales, it provides a significant source of information about the ages of fossils and the deduced rates of evolutionary change. Radiometric dating is also used to date archaeological materials, including ancient artifacts.

Different methods of radiometric dating vary in the timescale over which they are accurate and the materials to which they can be applied.

Contents

[edit] Fundamentals of radiometric dating

[edit] Radioactive Decay

Example of a radioactive decay chain from lead-212 (212Pb) to lead-208 (208Pb) . Each parent nuclide spontaneously decays into a daughter nuclide (the decay product) via an α decay or a β decay. The final decay product, lead-208 (208Pb), is stable and can no longer undergo spontaneous radioactive decay.

All ordinary matter is made up of combinations of chemical elements, each with its own atomic number, indicating the number of protons in the atomic nucleus. Additionally, elements may exist in different isotopes, with each isotope of an element differing in the number of neutrons in the nucleus. A particular isotope of a particular element is called a nuclide. Some nuclides are inherently unstable. That is, at some point in time, an atom of such a nuclide will spontaneously transform into a different nuclide. This transformation may be accomplished in a number of different ways, including radioactive decay, either by emission of particles (usually electrons (beta decay), positrons or alpha particles) or by spontaneous fission, and electron capture.

While the moment in time at which a particular nucleus decays is unpredictable, a collection of atoms of a radioactive nuclide decays exponentially at a rate described by a parameter known as the half-life, usually given in units of years when discussing dating techniques. After one half-life has elapsed, one half of the atoms of the nuclide in question will have decayed into a "daughter" nuclide or decay product. In many cases, the daughter nuclide itself is radioactive, resulting in a decay chain, eventually ending with the formation of a stable (nonradioactive) daughter nuclide; each step in such a chain is characterized by a distinct half-life. In these cases, usually the half-life of interest in radiometric dating is the longest one in the chain, which is the rate-limiting factor in the ultimate transformation of the radioactive nuclide into its stable daughter. Isotopic systems that have been exploited for radiometric dating have half-lives ranging from only about 10 years (e.g., tritium) to over 100 billion years (e.g., Samarium-147).

In general, the half-life of a nuclide depends solely on its nuclear properties; it is not affected by external factors such as temperature, pressure, chemical environment, or presence of a magnetic or electric field.[3][4][5] (For some nuclides which decay by the process of electron capture, such as Beryllium-7, Strontium-85, and Zirconium-89, the decay rate may be slightly affected by local electron density, therefore these isotopes may not be as suitable for radiometric dating.) But in general, the half-life of any nuclide is essentially a constant. Therefore, in any material containing a radioactive nuclide, the proportion of the original nuclide to its decay product(s) changes in a predictable way as the original nuclide decays over time. This predictability allows the relative abundances of related nuclides to be used as a clock to measure the time from the incorporation of the original nuclide(s) into a material to the present.

[edit] Preconditions

Mass spectrometer used in radiometric dating

The basic equation of radiometric dating requires that neither the parent nuclide nor the daughter product can enter or leave the material after its formation. The possible confounding effects of contamination of parent and daughter isotopes have to be considered, as do the effects of any loss or gain of such isotopes since the sample was created. It is therefore essential to have as much information as possible about the material being dated and to check for possible signs of alteration.[6] Precision is enhanced if measurements are taken on different samples from the same rock body but at different locations. Alternatively, if several different minerals can be dated from the same sample and are assumed to be formed by the same event and were in equilibrium with the reservoir when they formed, they should form an isochron. This can eliminate the problem of contamination. In uranium-lead dating, the concordia diagram is used which also eliminates the problem of nuclide loss. Finally, correlation between different isotopic dating methods may be required to confirm the age of a sample. For example, a study of the Amitsoq gneisses from western Greenland used five different radiometric dating methods to examine twelve samples and achieved agreement to within 30 Ma on an age of 3,640 Ma.[7]

Accurate radiometric dating generally requires that the parent has a long enough half-life that it will still be present in significant amounts at the time of measurement (except as described below under "Dating with short-lived extinct radionuclides"), the half-life of the parent is accurately known, and enough of the daughter product is produced to be accurately measured and distinguished from the initial amount of the daughter present in the material. The procedures used to isolate and analyze the parent and daughter nuclides must be precise and accurate. This normally involves isotope ratio mass spectrometry.[8]

The precision of a dating method depends in part on the half-life of the radioactive isotope involved. For instance, carbon-14 has a half-life of about 6000 years. After an organism has been dead for 60,000 years, so little carbon-14 is left in it that accurate dating becomes impossible. On the other hand, the concentration of carbon-14 falls off so steeply that the age of relatively young remains can be determined precisely to within a few decades.[citation needed]

[edit] Closure temperature

If a material that selectively rejects the daughter nuclide is heated, any daughter nuclides that have been accumulated over time will be lost through diffusion, setting the isotopic "clock" to zero. The temperature at which this happens is known as the closure temperature or blocking temperature and is specific to a particular material and isotopic system. These temperatures are experimentally determined in the lab by artificially resetting sample minerals using a high-temperature furnace. As the mineral cools, the crystal structure begins to form and diffusion of isotopes is less easy. At a certain temperature, the crystal structure has formed sufficiently to prevent diffusion of isotopes. This temperature is what is known as closure temperature and represents the temperature below which the mineral is a closed system to isotopes.[9][10] Thus an igneous or metamorphic rock or melt, which is slowly cooling, does not begin to exhibit measurable radioactive decay until it cools below the closure temperature. The age that can be calculated by radiometric dating is thus the time at which the rock or mineral cooled to closure temperature.[citation needed]

[edit] The age equation

Sm/Nd isochron plotted of samples [11] from the Great Dyke, Zimbabwe. The age is calculated from the slope of the isochron (line) and the original composition from the intercept of the isochron with the y-axis.

The mathematical expression that relates radioactive decay to geologic time, is[10][12]

D = D0 + N(eλt − 1)

where

t is age of the sample,
D is number of atoms of the daughter isotope in the sample,
D0 is number of atoms of the daughter isotope in the original composition,
N is number of atoms of the parent isotope in the sample, and
λ is the decay constant of the parent isotope, equal to the inverse of the radioactive half-life of the parent isotope[13] times the natural logarithm of 2.

The above equation makes use of information on the composition of parent and daughter isotopes at the time the material being tested cooled below its closure temperature. This is well-established for most isotopic systems.[14][9] However, construction of an isochron does not require information on the original compositions, using merely the present ratios of the parent and daughter isotopes to a standard isotope. Plotting an isochron is used to solve the age equation graphically and calculate the age of the sample and the original composition.

[edit] Modern dating methods

Radiometric dating has been carried out since 1905, and in the century since then the techniques have been greatly improved and expanded.[13] Dating can now be performed on samples as small as a billionth of a gram using a mass spectrometer. The mass spectrometer was invented in the 1940s and began to be used in radiometric dating in the 1950s. The mass spectrometer operates by generating a beam of ionized atoms from the sample under test. The ions then travel through a magnetic field, which diverts them into different sampling sensors, known as "Faraday cups", depending on their mass and level of ionization. On impact in the cups, the ions set up a very weak current that can be measured to determine the rate of impacts and the relative concentrations of different atoms in the beams.

[edit] Uranium-lead dating method

A concordia diagram as used in uranium-lead dating, with data from the Pfunze Belt, Zimbabwe.[15] All the samples show loss of lead isotopes, but the intercept of the errorchron (straight line through the sample points) and the concordia (curve) shows the correct age of the rock.[9]

The uranium-lead radiometric dating scheme has been refined to the point that the error margin in dates of rocks can be as low as less than two million years in two-and-a-half billion years.[11][16] An error margin of 2–5 % has been achieved on younger Mesozoic rocks.[17]

Uranium-lead dating is often performed on the mineral zircon (ZrSiO4), though it can be used on other materials, such as baddeleyite.[18] Zircon and baddeleyite incorporate uranium atoms into their crystalline structure as substitutes for zirconium, but strongly reject lead. It has a very high closure temperature, is resistant to mechanical weathering and is very chemically inert. Zircon also forms multiple crystal layers during metamorphic events, which each may record an isotopic age of the event. In situ micro-beam analysis can be achieved via laser ICP-MS or SIMS techniques.[19]

One of its great advantages is that any sample provides two clocks, one based on uranium-235's decay to lead-207 with a half-life of about 700 million years, and one based on uranium-238's decay to lead-206 with a half-life of about 4.5 billion years, providing a built-in crosscheck that allows accurate determination of the age of the sample even if some of the lead has been lost. This can be seen in the concordia diagram, where the samples plot along an errochron (straight line) which intersects the concordia curve at the age of the sample.

[edit] Samarium-neodymium dating method

This involves the alpha-decay of 147Sm to 143Nd with a half life of 1.06 x 1011 years. Accuracy levels of less than twenty million years in two-and-a-half billion years are achievable.[20]

[edit] Potassium-argon dating method

This involves electron capture or positron decay of potassium-40 to argon-40. Potassium-40 has a half-life of 1.3 billion years, and so this method is applicable to the oldest rocks. Radioactive potassium-40 is common in micas, feldspars, and hornblendes, though the closure temperature is fairly low in these materials, about 125°C (mica) to 450°C (hornblende).

[edit] Rubidium-strontium dating method

This is based on the beta decay of rubidium-87 to strontium-87, with a half-life of 50 billion years. This scheme is used to date old igneous and metamorphic rocks, and has also been used to date lunar samples. Closure temperatures are so high that they are not a concern. Rubidium-strontium dating is not as precise as the uranium-lead method, with errors of 30 to 50 million years for a 3-billion-year-old sample.

[edit] Uranium-thorium dating method

A relatively short-range dating technique is based on the decay of uranium-238 into thorium-230, a substance with a half-life of about 80,000 years. It is accompanied by a sister process, in which uranium-235 decays into protactinium-231, which has a half-life of 34,300 years.

While uranium is water-soluble, thorium and protactinium are not, and so they are selectively precipitated into ocean-floor sediments, from which their ratios are measured. The scheme has a range of several hundred thousand years.

[edit] Radiocarbon dating method

Ale's Stones at Kåseberga, around ten kilometres south east of Ystad, were dated at 600 CE using the Carbon–14 method on organic material found at the site.[21]

Carbon-14 is a radioactive isotope of carbon, with a half-life of 5,730 years,[22][23] which is very short compared with those above. In other radiometric dating methods, the heavy parent isotopes were synthesized in the explosions of massive stars that scattered materials through the universe, to be formed into planets and other stars. The parent isotopes have been decaying since that time, and so any parent isotope with a short half-life should be extinct by now. Carbon–14 is an exception. It is continuously created through collisions of neutrons generated by cosmic rays with nitrogen in the upper atmosphere. The carbon-14 ends up as a trace component in atmospheric carbon dioxide (CO2).

An organism acquires carbon during its lifetime. Plants acquire it through photosynthesis, and animals acquire it from consumption of plants and other animals. When an organism dies, it ceases to take in new carbon-14, and the existing isotope decays with a characteristic half-life (5730 years). The proportion of carbon-14 left when the remains of the organism are examined provides an indication of the time elapsed since its death. The carbon–14 dating limit lies around 58,000 to 62,000 years.[24]

The rate of creation of carbon-14 appears to be roughly constant, as cross-checks of carbon–14 dating with other dating methods show it gives consistent results. However, local eruptions of volcanoes or other events that give off large amounts of carbon dioxide can reduce local concentrations of carbon–14 and give inaccurate dates. The releases of carbon dioxide into the biosphere as a consequence of industrialization have also depressed the proportion of carbon-14 by a few percent; conversely, the amount of carbon-14 was increased by above-ground nuclear bomb tests that were conducted into the early 1960s. Also, an increase in the solar wind or the earth's magnetic field above the current value would depress the amount of carbon-14 created in the atmosphere. These effects are corrected for by the calibration of the radiocarbon dating scale.

[edit] Fission track dating method

Apatite crystals are widely used in fission track dating.

This involves inspection of a polished slice of a material to determine the density of "track" markings left in it by the spontaneous fission of uranium-238 impurities. The uranium content of the sample has to be known, but that can be determined by placing a plastic film over the polished slice of the material, and bombarding it with slow neutrons. This causes induced fission of 235U, as opposed to the spontaneous fission of 238U. The fission tracks produced by this process are recorded in the plastic film. The uranium content of the material can then be calculated from the number of tracks and the neutron flux.

This scheme has application over a wide range of geologic dates. For dates up to a few million years micas, tektites (glass fragments from volcanic eruptions), and meteorites are best used. Older materials can be dated using zircon, apatite, titanite, epidote and garnet which have a variable amount of uranium content.[25] Because the fission tracks are healed by temperatures over about 200°C the technique has limitations as well as benefits. The technique has potential applications for detailing the thermal history of a deposit.

[edit] Chlorine-36 dating method

Large amounts of otherwise rare 36Cl were produced by irradiation of seawater during atmospheric detonations of nuclear weapons between 1952 and 1958. The residence time of 36Cl in the atmosphere is about 1 week. Thus, as an event marker of 1950s water in soil and ground water, 36Cl is also useful for dating waters less than 50 years before the present. 36Cl has seen use in other areas of the geological sciences, including dating ice and sediments.

[edit] Optically stimulated luminescence dating method

Natural sources of radiation in the environment knock loose electrons in, say, a piece of pottery, and these electrons accumulate in defects in the material's crystal lattice structure. Heating the object will release the captured electrons, producing a luminescence. When the sample is heated, at a certain temperature it will glow from the emission of electrons released from the defects, and this glow can be used to estimate the age of the sample to a threshold of approximately 15 percent of its true age. The date of a rock is reset when volcanic activity remelts it. The date of a piece of pottery is reset by the heat of the kiln. Typically temperatures greater than 400 degrees Celsius will reset the "clock". This is termed thermoluminescence.

[edit] Other methods

Other methods include:

[edit] Dating with short-lived extinct radionuclides

Absolute radiometric dating requires a measurable fraction of parent nucleus to remain in the sample rock. For rocks dating back to the beginning of the solar system this requires extremely long lived parent isotopes, and thus the measurement of the different rocks exact ages becomes in-precise. To be able to distinguish the relative ages of rocks from such old material and get a better time resolution short-lived isotopes that are no longer present in the rock can be used. [26]


At the beginning of the solar system there were several relatively shortlived radionuclides like 26Al, 60Fe, 53Mn, and 129I present within the solar nebula. These radionuclides—possibly produced by the explosion of a supernova—are extinct today but their decay products can be detected in very old material such as meteorites. Measuring the decay products of extinct radionuclides with a mass spectrometer and using isochronplots it is possible to determine relative ages between different events in the early history of the solar system. Dating methods based on extinct radionuclides can also be calibrated with the U-Pb method to give absolute ages. Thus both the approximate age and a high time resolution can be obtained. Generally a shorter half life leads to a higher time resolution at the expense of timescale.


[edit] The 129I - 129Xe chronometer

129I beta-decays to 129Xe with a half life of 17 million years. Since xenon is a volatile noble gas it can be assumed that there wasn't much of it in the rock to begin with. Since it is much rarer than iodine, it can be assumed that most of the 129Xe present in the rock is a by-product of 129I decay. By using the solar system's average xenon content as the natural abundance, the excess of 129Xe to the abundance of 129I ratio can be derived.

[edit] The 26Al - 26Mg chronometer

Another example of short-lived extinct radionuclide dating is the 26Al - 26Mg chronometer which can be used to estimate the relative ages of chondrules. 26Al decays to 26Mg with a half-life of 720 000 years. The dating is simply a question of finding the derivation from the natural abundance of 26Mg (the product of 26Al decay) in comparison with the ratio of the stable isotopes 27Al/24Mg.

The excess of 26Mg (often designated 26Mg* ) is found by comparing the 26Mg/27Mg ratio to that of other Solar System materials.[27]


The 129I - 129Xe chronometer gives an estimate of the time period for formation of primitive meteorites of about 20 million years. Since some xenon might have escaped the rocks this formation period might be even shorter.

The 26Al - 26Mg chronometer on the other hand estimates a the formation time to only a few million years (1.4 million years for Chondrule formation)[28]

[edit] See also

[edit] References

  1. ^ International Union of Pure and Applied Chemistry. "radioactive dating". Compendium of Chemical Terminology Internet edition.
  2. ^ McRae, A. 1998. Radiometric Dating and the Geological Time Scale: Circular Reasoning or Reliable Tools? The Talk:Origins Archive
  3. ^ Emery, G T (1972). "Perturbation of Nuclear Decay Rates". Annual Review of Nuclear Science 22: 165–202. doi:10.1146/annurev.ns.22.120172.001121. 
  4. ^ Shlyakhter, A. I. (1976). "Direct test of the constancy of fundamental nuclear constants". Nature 264: 340. doi:10.1038/264340a0. 
  5. ^ Johnson, B. 1993. How to Change Nuclear Decay Rates Usenet Physics FAQ
  6. ^ Stewart, K,, Turner, S, Kelley, S, Hawkesworh, C Kristein, L and Manotvani, M (1996). "3-D, 40Ar---39Ar geochronology in the Paraná continental flood basalt province". Earth and Planetary Science Letters 143: 95–109. doi:10.1016/0012-821X(96)00132-X. 
  7. ^ Dalrymple, G. B. (1991). The Age of the Earth. Stanford, California: Stanford University Press. ISBN 0-8047-1569-6. [page number needed]
  8. ^ Dickin, Alan P. (2005). Radiogenic isotope geology. Cambridge: Cambridge University Press. ISBN 0-521-53017-2. [page number needed]
  9. ^ a b c Rollinson, Hugh R. (1993). Using geochemical data: evaluation, presentation, interpretation. Harlow: Longman. ISBN 0-582-06701-4. OCLC 27937350. [page number needed]
  10. ^ a b Faure, Gunter (1998). Principles and applications of geochemistry: a comprehensive textbook for geology students (2nd ed.). Englewood Cliffs, New Jersey: Prentice Hall. ISBN 0-02-336450-5. OCLC 37783103. [page number needed]
  11. ^ a b Oberthür, T, Davis, DW, Blenkinsop, TG, Hoehndorf, A (2002). "Precise U–Pb mineral ages, Rb–Sr and Sm–Nd systematics for the Great Dyke, Zimbabwe—constraints on late Archean events in the Zimbabwe craton and Limpopo belt". Precambrian Research 113: 293–306. doi:10.1016/S0301-9268(01)00215-7. 
  12. ^ White, W. M. (2003). "Basics of Radioactive Isotope Geochemistry". Cornell University. http://www.geo.cornell.edu/geology/classes/Geo656/656notes03/656%2003Lecture04.pdf. 
  13. ^ a b "Geologic Time: Radiometric Time Scale". United States Geological Survey. June 16, 2001. http://pubs.usgs.gov/gip/geotime/radiometric.html. 
  14. ^ Stacey, J. S.; J. D. Kramers (June 1975). "Approximation of terrestrial lead isotope evolution by a two-stage model". Earth and Planetary Science Letters 26 (2): 207–221. doi:10.1016/0012-821X(75)90088-6. http://adsabs.harvard.edu/abs/1975E&PSL..26..207S. 
  15. ^ Vinyu, M. L.; R. E. Hanson, M. W. Martin, S. A. Bowring, H. A. Jelsma and P. H. G. M. Dirks (2001). "U-Pb zircon ages from a craton-margin archaean orogenic belt in northern Zimbabwe". Journal of African Earth Sciences 32: 103–114. doi:10.1016/S0899-5362(01)90021-1. 
  16. ^ Manyeruke, Tawanda D.; Thomas G. Blenkinsop, Peter Buchholz, David Love, Thomas Oberthür, Ulrich K. Vetter and Donald W. Davis (2004). "The age and petrology of the Chimbadzi Hill Intrusion, NW Zimbabwe: first evidence for early Paleoproterozoic magmatism in Zimbabwe". Journal of African Earth Sciences 40: 281–292. doi:10.1016/j.jafrearsci.2004.12.003. 
  17. ^ Li, Xian-hua; Xi-rong Liang, Min Sun, Hong Guan and J. G. Malpas (2001). "Precise 206Pb/238U age determination on zircons by laser ablation microprobe-inductively coupled plasma-mass spectrometry using continuous linear ablation". Chemical Geology 175: 209–219. doi:10.1016/S0009-2541(00)00394-6. 
  18. ^ Wingate, M.T.D. (2001). "SHRIMP baddeleyite and zircon ages for an Umkondo dolerite sill, Nyanga Mountains, Eastern Zimbabwe". South African Journal of Geology 104: 13–22. doi:10.2113/104.1.13. 
  19. ^ Ireland, Trevor (December 1999). "Isotope Geochemistry: New Tools for Isotopic Analysis". Science 286 (5448): 2289–2290. doi:10.1126/science.286.5448.2289. 
  20. ^ Mukasa, S. B.; A. H. Wilson and R. W. Carlson (December 1998). "A multielement geochronologic study of the Great Dyke, Zimbabwe: significance of the robust and reset ages". Earth and Planetary Science Letters 164 (1–2): 353–369. doi:10.1016/S0012-821X(98)00228-3. 
  21. ^ "Ales stenar". The Swedish National Heritage Board. October 11, 2006. http://www.raa.se/cms/extern/en/places_to_visit/our_historical_sites/ales_stenar.html. Retrieved on March 9, 2009. 
  22. ^ Clark, R. M. (1975). "A calibration curve for radiocarbon dates". Antiquity 49: 251–266. http://www.antiquity.ac.uk/ant/049/Ant0490251.htm. 
  23. ^ Vasiliev, S. S.; V. A. Dergachev (2002). "The ~2400-year cycle in atmospheric radiocarbon concentration: Bispectrum of 14C data over the last 8000 years". Annales Geophysicae 20: 115–120. http://www.ann-geophys.net/20/115/2002/angeo-20-115-2002.pdf. 
  24. ^ Plastino, Wolfango; Lauri Kaihola, Paolo Bartolomei and Francesco Bella (2001). "Cosmic background reduction in the radiocarbon measurement by scintillation spectrometry at the underground laboratory of Gran Sasso". Radiocarbon 43 (2A): 157–161. http://digitalcommons.library.arizona.edu/objectviewer?o=http%3A%2F%2Fradiocarbon.library.arizona.edu%2FVolume43%2FNumber2A%2Fazu_radiocarbon_v43_n2A_157_161_v.pdf. 
  25. ^ Jacobs, J.; R. J. Thomas (August 2001). "A titanite fission track profile across the southeastern Archæan Kaapvaal Craton and the Mesoproterozoic Natal Metamorphic Province, South Africa: evidence for differential cryptic Meso- to Neoproterozoic tectonism". Journal of African Earth Sciences 33 (2): 323–333. doi:10.1016/S0899-5362(01)80066-X. 
  26. ^ Imke de Pater and Jack J. Lissauer: Planetary Sciences, page 321. Cambridge Unversity Press, 2001. ISBN 0 521 48219 4
  27. ^ Alexander N. Krot(2002)Dating the Earliest Solids in our Solar System, Hawai'i Institute of Geophysics and Planetology http://www.psrd.hawaii.edu/Sept02/isotopicAges.html.
  28. ^ Imke de Pater and Jack J. Lissauer: Planetary Sciences, page 322. Cambridge Unversity Press, 2001. ISBN 0 521 48219 4
Personal tools