Frequency

From Wikipedia, the free encyclopedia

Jump to: navigation, search
For other uses, see Frequency (disambiguation).
Sinusoidal waves of various frequencies; the bottom waves have higher frequencies than those above. The horizontal axis represents time.

Frequency is the number of occurrences of a repeating event per unit time. It is also referred to as temporal frequency. The period is the duration of one cycle in a repeating event, so the period is the reciprocal of the frequency.

Contents

[edit] Definitions and units

For cyclical processes, such as rotation, oscillations, or waves, frequency is defined as a number of cycles, or periods, per unit time. In physics and engineering disciplines, such as optics, acoustics, and radio, frequency is usually denoted by a Latin letter f or by a Greek letter ν (nu).

In SI units, the unit of frequency is hertz (Hz), named after the German physicist Heinrich Hertz. For example, 1 Hz means that an event repeats once per second, 2 Hz is twice per second, and so on. This unit was originally called a cycle per second (cps), which is still sometimes used. Heart rate and musical tempo are measured in beats per minute (BPM). Frequency of rotation is often expressed as a number of revolutions per minute (rpm). BPM and rpm values must be divided by 60 to obtain the corresponding value in Hz: thus, 60 BPM translates into 1 Hz.

The period is usually denoted as T, and is the reciprocal of the frequency f:

T = \frac{1}{f}.

The SI (as well as English) unit for period is the second (s).

[edit] Measurement

[edit] By timing

To calculate the frequency of an event, the number of occurrences of the event within a fixed time interval are counted, and then divided by the length of the time interval.

In experimental work (for example, calculating the frequency of an oscillating pendulum) it is generally more accurate to measure the time taken for a fixed number of occurrences, rather than the number of occurrences within a fixed time. The latter method introduces — if N is the number of counted occurrences — a random error between zero and one count, so on average half a count, causing a biased underestimation of f by ½ f / (N + ½)[citation needed] in its expected value. In the first method, which does not suffer this particular error, frequency is still calculated by dividing the number of occurrences by the time interval; however it is the number of occurrences that is fixed, not the time interval.

[edit] By stroboscope effect, or frequency beats

In case when the frequency is so high that counting is difficult or impossible with the available means, another method is used, based on a source (such as a laser, a tuning fork, or a waveform generator) of a known reference frequency f0, that must be tunable or very close to the measured frequency f. Both the observed frequency and the reference frequency are simultaneously produced, and frequency beats are observed at a much lower frequency Δf, which can be measured by counting. This is sometimes referred to as a stroboscope effect. The unknown frequency is then found from f=f_0\pm \Delta f.

[edit] Frequency of waves

Frequency has an inverse relationship to the concept of wavelength, simply, frequency is inversely proportional to wavelength λ (lambda). The frequency f is equal to the phase speed v of the wave divided by the wavelength λ of the wave:

f = \frac{v}{\lambda}.

In the special case of electromagnetic waves moving through a vacuum, then v = c , where c is the speed of light in a vacuum, and this expression becomes:

f = \frac{c}{\lambda}.

When waves from a monochromatic source travel from one medium to another, their frequency remains exactly the same — only their wavelength and speed change.

[edit] Examples

[edit] Physics of light

Radiant energy is energy which is propagated in the form of electromagnetic waves. Most people think of natural sunlight or electrical light, when considering this form of energy. The type of light which we perceive through our optical sensors (eyes) is classified as white light, and is composed of a range of colors (red, orange, yellow, green, blue, indigo, violet) over a range of wavelengths, or frequencies.

Visible (white) light is only a small fraction of the entire spectrum of electromagnetic radiation. At the short end of that wavelength scale is ultraviolet (UV) light from the sun, which cannot be seen. At the longer end of that spectrum is infrared (IR) light, which is used for night vision and other heat-seeking devices. At even shorter wavelengths than UV are X-rays and Gamma-rays. At longer wavelengths than IR are microwaves (radar), and radio / television waves.

Complete spectrum of electromagnetic radiation with the visible portion highlighted

Electromagnetic radiation is classified according to the frequency (or wavelength) of the light wave. This includes (in order of increasing frequency): radio waves, microwaves, terahertz radiation, infrared (IR) radiation, visible light, ultraviolet (UV) radiation, X-rays and gamma rays. Of these, radio waves have the longest wavelengths and Gamma rays have the shortest. A small window of frequencies, called visible spectrum or light, is sensed by the eye of various organisms, with variations of the limits of this narrow spectrum.

[edit] Physics of sound

Sound is vibration transmitted through a solid, liquid, or gas; particularly, sound means those vibrations composed of frequencies capable of being detected by ears. For humans, hearing is limited to frequencies between about 20 Hz and 20,000 Hz (20 kHz), with the upper limit generally decreasing with age. Other species have a different range of hearing. For example, dogs can perceive vibrations higher than 20 kHz. As a signal perceived by one of the major senses, sound is used by many species for detecting danger, navigation, predation, and communication.

The mechanical vibrations that can be interpreted as sound are able to travel through all forms of matter: gases, liquids, solids, and plasmas. The matter that supports the sound is called the medium. Sound cannot travel through vacuum.

[edit] Longitudinal and transverse waves

Sinusoidal waves of various frequencies; the bottom waves have higher frequencies than those above. The horizontal axis represents time.

Sound is transmitted through gases, plasma, and liquids as longitudinal waves, also called compression waves. Through solids, however, it can be transmitted as both longitudinal and transverse waves. Longitudinal sound waves are waves of alternating pressure deviations from the equilibrium pressure, causing local regions of compression and rarefaction, while transverse waves in solids, are waves of alternating shear stress.

Matter in the medium is periodically displaced by a sound wave, and thus oscillates. The energy carried by the sound wave converts back and forth between the potential energy of the extra compression (in case of longitudinal waves) or lateral displacement strain (in case of transverse waves) of the matter and the kinetic energy of the oscillations of the medium.

[edit] Sound wave properties

Sound waves are characterized by the generic properties of waves, which are frequency, wavelength, period, amplitude, intensity, speed, and direction (sometimes speed and direction are combined as a velocity vector, or wavelength and direction are combined as a wave vector).

Transverse waves, also known as shear waves, have an additional property of polarization.

Sound characteristics can depend on the type of sound waves (longitudinal versus transverse) as well as on the physical properties of the transmission medium.

Whenever the pitch of the soundwave is affected by some kind of change, the distance between the sound wave maxima also changes, resulting in a change of frequency. When the loudness of a soundwave changes, so does the amount of compression in airwave that is travelling through it, which in turn can be defined as amplitude.

In music and acoustics, the frequency of the standard pitch A above middle C on a piano is usually defined as 440 Hz, that is, 440 cycles per second (Media-440Hz.ogg Listen (help·info)) and known as concert pitch, to which an orchestra tunes.

[edit] Other examples

In Europe, Africa, Australia, Southern South America, most of Asia, and Russia, the frequency of the alternating current in household electrical outlets is 50 Hz (close to the tone G), whereas in North America and Northern South America, the frequency of the alternating current is 60 Hz (between the tones B♭ and B — that is, a minor third above the European frequency). The frequency of the 'hum' in an audio recording can show where the recording was made — in countries utilizing the European, or the American grid frequency.

[edit] Period versus frequency

As a matter of convenience, longer and slower waves, such as ocean surface waves, tend to be described by wave period rather than frequency. Short and fast waves, like audio and radio, are usually described by their frequency instead of period. These commonly used conversions are listed below:

Frequency 1 mHz (10-3) 1 Hz (100) 1 kHz (103) 1 MHz (106) 1 GHz (109) 1 THz (1012)
Period (time) 1 ks (103) 1 s (100) 1 ms (10-3) 1 µs (10-6) 1 ns (10-9) 1 ps (10-12)

[edit] Other types of frequency

  • Angular frequency ω is defined as the rate of change in the orientation angle (during rotation), or in the phase of a sinusoidal waveform (e.g. in oscillations and waves):
\omega=2\pi f\,.
Angular frequency is measured in radians per second (rad/s).
  • Spatial frequency is analogous to temporal frequency, but the time axis is replaced by one or more spatial displacement axes.
  • Wavenumber is the spatial analogue of angular frequency. In case of more than one spacial dimension, wavenumber is a vector quantity.

[edit] See also

Electronics portal

[edit] References

  • Giancoli, D.C. (1988), Physics for Scientists and Engineers (2nd ed.), Prentice Hall, ISBN 013669201X 

[edit] External links

Look up frequency, often in Wiktionary, the free dictionary.
Retrieved from "http://en.wikipedia.org/wiki/Frequency"
Personal tools