Phytoremediation

From Wikipedia, the free encyclopedia

Jump to: navigation, search
Sister project Look up phytoremediation in
Wiktionary, the free dictionary.

Phytoremediation describes the treatment of environmental problems (bioremediation) through the use of plants which mitigate the environmental problem without the need to excavate the contaminant material and dispose of it elsewhere.

The word's etymology comes from the Greek φυτο (phyto) = plant, and Latin « remedium » = restoring balance, or remediation. Phytoremediation consists in mitigating pollutant concentrations in contaminated soils, water or air with plants able to contain, degrade or eliminate metals, pesticides, solvents, explosives, crude oil and its derivatives, and various other contaminants, from the media that contain them.

Contents

[edit] Application

Phytoremidiation may be applied wherever the soil or static water environment has become polluted or is suffering ongoing chronic pollution. Examples where phytoremidation has been used successfully include the restoration of abandoned metal-mine workings, reducing the impact of sites where PCBs have been dumped during manufacturer and mitigation of on-going coal mine discharges.

It is a clean, efficient, inexpensive and non-environmentally disruptive method, as opposed to processes that require excavation of soil. The definitive textbook on phytoremediation was published in 2003 with contributed, peer reviewed articles from all major research groups involved in phytoremediation research (Phytoremediation: Transformation and Control of Contaminants, edited by Steven C. McCutcheon and Jerald L. Schnoor).

[edit] Advantages and limitations

  • Advantages:
    • the cost of the phytoremediation is lower than that of traditional processes both in situ and ex situ
    • the plants can be easily monitored
    • the possibility of the recovery and re-use of valuable metals (by companies specializing in “phytomining”)
    • it is the least harmful method because it uses naturally occurring organisms and preserves the natural state of the environment.
  • Limitations:
    • phytoremediation is limited to the surface area and depth occupied by the roots.
    • slow growth and low biomass require a long-term commitment
    • with plant-based systems of remediation, it is not possible to completely to prevent the leaching of contaminants into the groundwater (without the complete removal of the contaminated ground which in itself does not resolve the problem of contamination)
    • the survival of the plants is affected by the toxicity of the contaminated land and the general condition of the soil.
    • possible bio-accumulation of contaminants which then pass into the food chain, from primary level consumers upwards.


[edit] Various phytoremediation processes

A range of processes mediated by plants or algae are useful in treating environmental problems:

  • Phytoextraction - uptake and concentration of substances from the environment into the plant biomass.
  • Phytostabilization - reducing the mobility of substances in the environment, for example by limiting the leaching of substances from the soil.
  • Phytotransformation - chemical modification of environmental substances as a direct result of plant metabolism, often resulting in their inactivation, degradation (phytodegradation) or immobilization (phytostabilization).
  • Phytostimulation - enhancement of soil microbial activity for the degradation of contaminants, typically by organisms that associate with roots. This process is also known as rhizosphere degradation.
  • Phytovolatilization - removal of substances from soil or water with release into the air, sometimes as a result of phytotransformation to more volatile and / or less polluting substances.
  • Rhizofiltration - filtering water through a mass of roots to remove toxic substances or excess nutrients. The pollutants remain absorbed in or adsorbed to the roots.

[edit] Phytoextraction

Phytoextraction (or phytoaccumulation) uses plants or algae to remove contaminants from soils, sediments or water into harvestable plant biomass. Phytoextraction has been growing rapidly in popularity world-wide for the last twenty years or so. Generally this process has been tried more often for extracting heavy metals than for organics. At the time of disposal contaminants are typically concentrated in the much smaller volume of the plant matter than in the initially contaminated soil or sediment. 'Mining with plants', or phytomining, is also being experimented with.

The plants absorb contaminants through the root system and store them in the root biomass and/or transport them up into the stems and/or leaves. A living plant may continue to absorb contaminants until it is harvested. After harvest a lower level of the contaminant will remain in the soil, so the growth/harvest cycle must usually be repeated through several crops to achieve a significant cleanup. After the process, the cleaned soil can support other vegetation.

Two versions of phytoextraction:

  • natural hyper-accumulation, where plants naturally take up the contaminants in soil unassisted, and
  • induced or assisted hyper-accumulation, in which a conditioning fluid containing a chelator or another agent is added to soil to increase metal solubility or mobilization so that the plants can absorb them more easily. In many cases natural hyperaccumulators are metallophyte plants that can tolerate and incorporate high levels of toxic metals.

Examples of phytoextraction from soils (see also 'Table of hyperaccumulators'):

[edit] Phytostabilization

Phytostabilization focuses on long-term stabilization and containment of the pollutant. For example, the plant's presence can reduce wind erosion, or the plant's roots can prevent water erosion, immobilize the pollutants by adsorption or accumulation, and provide a zone around the roots where the pollutant can precipitate and stabilize. Unlike phytoextraction, phytostabilization mainly focuses on sequestering pollutants in soil near the roots but not in plant tissues. Pollutants become less bioavailable and livestock, wildlife, and human exposure is reduced. An example application of this sort is using a vegetative cap to stabilize and contain mine tailings.[2]

[edit] Phytotransformation

In the case of organic pollutants, such as pesticides, explosives, solvents, industrial chemicals, and other xenobiotic substances, certain plants, such as Cannas, render these substances non-toxic by their metabolism. In other cases, microorganisms living in association with plant roots may metabolize these substances in soil or water. These complex and recalcitrant compounds cannot be broken down to basic molecules (water, carbondioxide etc) by plant molecules, and hence the term phytotransformation represents a change in chemical structure without complete breakdown of the compound. The term "Green Liver Model" [1] is used to describe phytotransformation, as plants behave analogously to the human liver when dealing with these xenobiotic compounds(foreign compound/pollutant). After uptake of the xenobiotics, plant enzymes increase the polarity of the xenobiotics by adding functional groups such as hydroxyl groups (-OH).

This is known as Phase I metabolism, similar to the way that the human liver increases the polarity of drugs and foreign compounds (Drug Metabolism. Whilst in the human liver, enzymes such as Cytochrome P450s are responsible for the initial reactions. In plants, enzymes such as nitroreductases carry out the same role.

In the second stage of phytotransformation, known as Phase II metabolism, plant biomolecules such as glucose and amino acids are added to the polarized xenobiotic to further increase the polarity (known as conjugation). This is again similar to the processes occurring in the human pancreas where glucuronidation (addition of glucose molecules by the UGT (e.g. UGT1A1) class of enzymes) and glutathione addition reactions occur on reactive centres of the xenobiotic.

Phase I and II reactions serve to increase the polarity and reduce the toxicity of the compounds, although many exceptions to the rule are seen. The increased polarity also allows for easy transport of the xenobiotic along aqueous channels.

In the final stage of phytotransformation (Phase III metabolism), a sequestration of the xenobiotic occurs within the plant. The xenobiotics polymerize in a lignin-like manner and develop a complex structure which is sequestered in the plant. This ensures that the xenobiotic is safely stored, and does not affect the functioning of the plant. However, preliminary studies have shown that these plants can be toxic to small animals (such as snails) and hence plants involved in phytotransformation may need to be maintained in a closed enclosure.

Hence, the plants reduce toxicity (with exceptions) and sequester the xenobiotics in phytotransformation. Trinitrotoluene phytotransformation has been extensively researched and a transformation pathway has been proposed [3].

[edit] The role of genetics

Breeding programs and genetic engineering are powerful methods for enhancing natural phytoremediation capabilities, or for introducing new capabilities into plants. Genes for phytoremediation may originate from a micro-organism or may be transferred from one plant to another variety better adapted to the environmental conditions at the cleanup site. For example, genes encoding a nitroreductase from a bacterium were inserted into tobacco and showed faster removal of TNT and enhanced resistance to the toxic effects of TNT [4]. Researchers have also discovered a mechanism in plants that allows them to grow even when the pollution concentration in the soil is lethal for non-treated plants. Some natural, biodegradable compunds, such as exogenous polyamines, allow the plants to tolerate concentrations of pollutants 500 times higher than untreated plants, and to absorb more pollutants.

[edit] Hyperaccumulators and biotic interactions

A plant is said to be a hyperaccumulator if it can concentrate the pollutants in a minimum percentage which varies according to the pollutant involved (for example: more than 1000 mg/kg of dry weight for nickel, copper, cobalt, chromium or lead; or more than 10,000 mg/kg for zinc or manganese.[5] This capacity for accumulation is due to hypertolerance, or phytotolerance: the result of adaptative evolution from the plants to hostile environments through many generations. A number of interactions may be affected by metal hyperaccumulation, including protection, interferences with neighbour plants of different species, mutualism (including mycorrhizae, pollen and seed dispersal),commensalism and biofilm.

[edit] Table of hyperaccumulators

[edit] References

  1. ^ Meagher, RB (2000). "Phytoremediation of toxic elemental and organic pollutants". Current Opinion In Plant Biology 3 (2): 153–162. doi:10.1016/S1369-5266(99)00054-0. PMID 10712958. 
  2. ^ Mendez MO, Maier RM (2008). "Phytostabilization of mine tailings in arid and semiarid environments—an emerging remediation technology". Environ Health Perspect 116 (3): 278–83. doi:10.1289/ehp.10608. http://www.ehponline.org/members/2007/10608/10608.html. 
  3. ^ Murali Subramanian, David J. Oliver, and Jacqueline V. Shanks. TNT Phytotransformation Pathway Characteristics in Arabidopsis: Role of Aromatic Hydroxylamines. Biotechnol. Prog., 22 (1), 208 -216, 2006.
  4. ^ Hannink N, Rosser SJ, French CE, Basran A, Murray JA, Nicklin S, Bruce NC. Phytodetoxification of TNT by transgenic plants expressing a bacterial nitroreductase. 1: Nat Biotechnol. 2001 Dec;19(12):1168-72.
  5. ^ A.J.M. Baker, R.R. Brooks. Terrestrial higher plants which hyperaccumulate metallic elements – A review of their distribution, ecology and phytochemistry. Biorecovery (1989), 1:81–126

[edit] See also

[edit] External links

[edit] Bibliography

Retrieved from "http://en.wikipedia.org/wiki/Phytoremediation"
Personal tools